Cold air and filter box
Thread Starter
Scooby Regular
Joined: Apr 2002
Posts: 2,896
Likes: 0
A few people have individually contacted me for more information on the box.
Tips:
Use cardboard (thick stuff as used for boxes) to make one or more templates until you're fairly sure that the box will fit ok. Only then move it across to metal. I used tin snips but a jig saw would probably also be fine - except the for vibrations it would cause - hence me using tin snips.
I used galvanised steel but you can obviously also use aluminium.
I edged it to ensure there were no sharp edges anywhere.
Tips:
Use cardboard (thick stuff as used for boxes) to make one or more templates until you're fairly sure that the box will fit ok. Only then move it across to metal. I used tin snips but a jig saw would probably also be fine - except the for vibrations it would cause - hence me using tin snips.
I used galvanised steel but you can obviously also use aluminium.
I edged it to ensure there were no sharp edges anywhere.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM