PROJECT DRAG CAR
#1
Scooby Regular
Thread Starter
PROJECT DRAG CAR
Decided its time to dust of the old girl and show it some daylight again, my goal is to run a sub 12 second 1/4 mile, as i have never been on a strip before this is not going to be as easy as you might think, with the help of David Coe (Engine) Steve Brogden (Gearbox) this year will be a learning curve.
#5
Scooby Regular
iTrader: (2)
Join Date: Oct 2002
Location: oop north in a spec-c.Now sold and starting on a classic ra track/sprint/road car
Posts: 2,536
Likes: 0
Received 7 Likes
on
7 Posts
Decided its time to dust of the old girl and show it some daylight again, my goal is to run a sub 12 second 1/4 mile, as i have never been on a strip before this is not going to be as easy as you might think, with the help of David Coe (Engine) Steve Brogden (Gearbox) this year will be a learning curve.
#6
Scooby Regular
Thread Starter
At the w/e we put the car on a wiegh bridge and it came in at a lardy 1126kg, definatley needs to go on a diet, the front mount mainfold will have to go and replaced with a rotated setup, replace the MD321V with a GT3076. and look at the option of changing from a 6spd to a 5spd gearbox, have worked it out there could be a possible wieght saving of around 28kgs.
#7
Scooby Regular
Thread Starter
Will give it a go us over 60s have still got life in us.
Trending Topics
#10
Scooby Regular
iTrader: (22)
My old type R weighed 1231kg without me in (another 100kg) I managed 10.9 with 430HP at the wheels circa 520 at the flywheel.
If you cant do a 12 with a GT30 with a car weighing what yours does there's something wrong. I'd be aiming for 11's atleast.
Good luck, it's great fun and highly addictive
If you cant do a 12 with a GT30 with a car weighing what yours does there's something wrong. I'd be aiming for 11's atleast.
Good luck, it's great fun and highly addictive
#11
Scooby Regular
Quite right Daz, I've ran a 10.8 on a basic specced 2.1 motor with a bolt on turbo so I suspect he'll be going a lot quicker than 12s in no time at all.
Good luck with the build John !
Good luck with the build John !
#14
Scooby Regular
Thread Starter
My old type R weighed 1231kg without me in (another 100kg) I managed 10.9 with 430HP at the wheels circa 520 at the flywheel.
If you cant do a 12 with a GT30 with a car weighing what yours does there's something wrong. I'd be aiming for 11's atleast.
Good luck, it's great fun and highly addictive
If you cant do a 12 with a GT30 with a car weighing what yours does there's something wrong. I'd be aiming for 11's atleast.
Good luck, it's great fun and highly addictive
Will be paying SLS a visit at some time, yes.
See you are going all out this season, good luck.
Last edited by spd(john); 03 March 2017 at 08:50 AM. Reason: Edit
#15
Scooby Regular
Thread Starter
TYRES
What tyres would you advise I use, I am sticking with my 17" rims at this time as I have a supply of part worn Michelins SB to use up before investing in any more new tyres.
Thanks in advance.
Thanks in advance.
#21
Scooby Regular
Thread Starter
Asked Keith back in 2011 to drive the car for me so I could get some feedback on the chassis development that I had done as he had previously driven the car before, I think you say his response say's it all lol.
Last edited by spd(john); 04 March 2017 at 04:07 AM. Reason: Edit
#23
Scooby Regular
Thread Starter
3 WEEKS TO GO
With only 3 weeks before we are due to run the car at Shakesphere Raceway, I have hit a major snag already, the new engine is not going to be ready in time to allow any testing, so have decided to run with the current engine which is a 2.5 with the front mounted turbo MD321V but first need to revamp the fuel setup and get the map tweaked, all i have to do now is find some one who can fit it in. (Any ideas. willing to travel)
On a positive note it`s only a setup w/e, so will give me chance to learn the process, hopefully Madhammer will be on hand for any advice if he is not to busy.
On a positive note it`s only a setup w/e, so will give me chance to learn the process, hopefully Madhammer will be on hand for any advice if he is not to busy.
#24
Unmapped 12.4s @ 105
iTrader: (29)
Join Date: Apr 2005
Location: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Posts: 11,776
Likes: 0
Received 4 Likes
on
4 Posts
If not, clutch to the floor, revs to around 5K rpm, blipping the throttle. Lights go green, sidestep the clutch and mash the throttle to the floor. Remembering to change gear along the way.
Sound advice given to me many years ago, by 2 who have a lot more experience of racing than me.
#26
Scooby Regular
iTrader: (55)
With only 3 weeks before we are due to run the car at Shakesphere Raceway, I have hit a major snag already, the new engine is not going to be ready in time to allow any testing, so have decided to run with the current engine which is a 2.5 with the front mounted turbo MD321V but first need to revamp the fuel setup and get the map tweaked, all i have to do now is find some one who can fit it in. (Any ideas. willing to travel)
On a positive note it`s only a setup w/e, so will give me chance to learn the process, hopefully Madhammer will be on hand for any advice if he is not to busy.
On a positive note it`s only a setup w/e, so will give me chance to learn the process, hopefully Madhammer will be on hand for any advice if he is not to busy.
I'll be at shakey this season but not till later in spring.
#27
Scooby Regular
Thread Starter