Edit for a bit of a shuffle round

As yet unsold stuff..

Samco....

All in blue Samco standard Polyester Silicone, suitable for a maximum temperature of 170C. Standard Race hose for coolant and Turbo applications.
1 x 90 degree 76mm ID £20
1 x 45 degree 76mm ID £20
1 x 90 degree 32mm ID £10
2 x straight couplers 76mm ID £5
1 x straight coupler 63mm ID £4
1 x 1m length 32mm ID £20
1 x 1m length 12.7mm ID £20
1 x 1m length 9.5mm ID £10
3m coil of vac hose (not reinforced) 6.3mm ID, 2.5mm wall thickness £10
http://www.ashlyn.plus.com/clearout/clearout%20007.jpg
http://www.ashlyn.plus.com/clearout/clearout%20008.jpg

Forge Recirc/dump valve,
Version 6 it says on the box.
I say Sti5... Confirmed, it's fits the STi-5 intercooler I have here
£50 + delivery
www.ashlyn.plus.com/clearout/clearout%20009.jpg

FSE fuel pressure regulator,
including gauge and push on unions, also small bracket still there and push on union to bolt to end of OE rail included.
£50 + delivery
www.ashlyn.plus.com/clearout/clearout%20012.jpg

Speaker cable, (power pax, Hi-flex)
2 x 5m + lengths of OFC 0.75mm cable,
£5 + delivery.
www.ashlyn.plus.com/clearout/clearout%20013.jpg

Cheap and nasty brake flaring kit,
Going in the bin if no one makes an offer on it. [Big Grin]
http://www.ashlyn.plus.com/clearout/clearout%20019.jpg

So far all stuff below has already been allocated to someone..

STi-8 Type UK (R180) rear diff,
complete and good working order, not used in a high power car
£100 + delivery Provisionally sold
www.ashlyn.plus.com/clearout/clearout%20022.jpg

Full "Monster" underbody aluminium skid plates/ sump guard,
three plates; engine, gearbox and rear diff / prop guards and including all the brackets, slight skid marks but not bent! (that sounds dodgy!!)
£100 + delivery. Provisionally sold
www.ashlyn.plus.com/clearout/clearout%20001.jpg
www.ashlyn.plus.com/clearout/clearout%20002.jpg

Engine stand,
Clarke 340Kg sturdy/stable engine stand, hardly used.
£20 + delivery Provisionally sold
www.ashlyn.plus.com/clearout/clearout%20005.jpg
www.ashlyn.plus.com/clearout/clearout%20006.jpg


Two 2.75" Miltek rear exhaust boxes... not sure where they came from. [Big Grin]
£30 + delivery Provisionally sold both
http://www.ashlyn.plus.com/clearout/clearout%20024.jpg
http://www.ashlyn.plus.com/clearout/clearout%20027.jpg


3" slip jointed twin scroll full system (loud as ****) unknown make. (converted into twinscroll by me, including boss for EGT sensor)
£50 + delivery provisionally sold
http://www.ashlyn.plus.com/clearout/clearout%20025.jpg

VF28,
Good working order, with oil drain and water pipes still attached.
Free spider thrown in...
£100 + delivery Provisionally sold
www.ashlyn.plus.com/clearout/clearout%20003.jpg
www.ashlyn.plus.com/clearout/clearout%20004.jpg


Sti-5 intercooler,
Fins look in good nick however missing one of the elbows on the inlet side... )
£20 + delivery Provisionally sold
www.ashlyn.plus.com/clearout/clearout%20023.jpg

2 x full rolls of Dynamat Extreme,
Extreme being the silver surfaced version.
also half a roll of extreme and half a roll or normal dynamat and two 12" squares of no name deadening (same stuff TBH)
£20 + delivery Provisionally sold
www.ashlyn.plus.com/clearout/clearout%20015.jpg

Headlight guards for facelift / Turbo 2000 model
£10 + delivery Provisionally sold
www.ashlyn.plus.com/clearout/clearout%20020.jpg


Wet Nitrous oxide kit.
3/4 full 10lb bottle, terminated braided hoses, sharks fin injector, fuel and Nitrous soleniods.
Also wiring relay included.
Jets installed for 150 BHP [Big Grin] can't find the smaller jets.
£40 + delivery Provisionally sold
www.ashlyn.plus.com/clearout/clearout%20014.jpg

OE headunit from 2000 UK model.
£10 + delivery Provisionally sold
www.ashlyn.plus.com/clearout/clearout%20011.jpg

Pioneer 16cm 3 way speakers,
(ts-e1690) 180w max 60w nom, 4ohm, brackets to direct fit into 2000 turbo front doors.
Also passive crossovers and 1" tweets inc (not that you need that but it's how it was wired up on mine)
£10 + delivery Provisionally sold
www.ashlyn.plus.com/clearout/clearout%20010.jpg

Hoofing great JL Audio 10" sub,
Twin voice coil, to long ago to remember the make.
10W something rings a bell (1996 era)
Don't remember ever fitting it, but why it's been kicking around the garage for 10 yrs, who knows lol.
£20 + delivery, SOLD cheers for collecting. Az
http://www.ashlyn.plus.com/clearout/clearout%20016.jpg
http://www.ashlyn.plus.com/clearout/clearout%20017.jpg



Payments by paypal if you want.
pm or mail me for relevant address (avoiding spam bots)

If it won't fit in the letterbox it'll be collected and delivered by Citylink.
I cant expect my 68 yr old mother to take it all down the post office

Cheers for looking / filling my PM box and getting my website removed



Andy

 

Not got an STi topmount in there somewhere have ya m8 ???

 

you have pm

 

Nope, fitted that

Have got an original Carbon strut brace somewhere but not appeared yet!!

 

is the diff still for sale?

 

Everything is for sale until golden nuggets appear in my paypal account.

but no, provisionally sold i'm afraid

 

if the rear diff dose'nt sell then i will have it

 

Ill have the nos kit, can you pm me details please.

 

1st dibs on the sti tmic, could i also have more pictures f+r to
harry2006k@hotmail.co.uk

already pm'd you.

 

Provisionally gone already i'm afraid Worbs.


Andy

 

Arrrrr crap, lol, oh well, if it dont go mate drop me a pm ill defo have it.



Ian.

 

Pity you ain't got front Brembo calipers spare, specifically the passenger side, anyway probably see you at Powerstation next Saturday Andy, oh and free BTTT for you not that it it'll do much good at this time of night.

 

lol

Cheers anyway..

I think Litcho has a set of Brembos for sale.

Andy

 

Doubt he'll sell me one though

 

Then you'll have to buy a pair ...



Fast running out of PM space (read.. only one PM space left)
So use it wisely as I can't delete anything yet or I'll not know who has won what!!

Cheers

Andy

 

have you any pics of the 3" slip jointed twin scroll full system?

cheers
Ben

 

That's the plan for today Ben..


Andy

 

Updated original post with more bits and pictures of stuff that was missing.


Andy

 

Empty your pm's Andy

 

I know I know, made a few spaces, but not many..

 

lovely jubly andy, ill have the twin scroll system, is it badly damaged at all?

thanks for the pics mate

Ben

 

hello mate are the exhausts Provisionally sold to me. If so can i have 1 miltieck and 3" slip joint if you can sort me out on a good price i can pay through paypal straight away.

 

I have a list of who got dibs on what first.. not near the list now though as I'm tucked up in bed.

Don't remember your name on anything though Skans..
Most of it went on 22b.com before I finished writing the post on here..

Cheers
Andy

 

PM's on here full again, so you'll have to hang fire until I sift through them.


Andy

 

Fuzz.....
Dibs on the JL 10" sub m8
Can you send me pics pls ??

 

Pics not working now mate.

 

What size ID Samco hose you got (pic links not working)?

 

Dear Customer,



It has come to our attention that in the last 24 hours your website

has exceeded its bandwidth allowance by a significant amount.



Unfortunately, because of the amount over the limit, your site has

been archived. Please contact us through the website if you want

your site to be restored. - we cannot do this by email or over the

telephone.



Your website used 249089 KB OVER its bandwidth transfer

allowance during the last 24 hours.

 

Stop looking at all that P0RN u uploaded then

 

Samco....

All in blue Samco standard Polyester Silicone, suitable for a maximum temperature of 170C. Standard Race hose for coolant and Turbo applications.
1 x 90 degree 76mm ID £20
1 x 45 degree 76mm ID £20
1 x 90 degree 32mm ID £10
2 x straight couplers 76mm ID £5
1 x straight coupler 63mm ID £4

1 x 1m length 32mm ID £20
1 x 1m length 12.7mm ID £20
1 x 1m length 9.5mm ID £15

3m coil of vac hose (not reinforced) 6.3mm ID, 2.5mm wall thickness £10

Andy