Big clearout of some tastey parts
 

Having decided to break my current Impreza I can offer the tuning parts and other parts accumulated to date.
Time and weather allowing stripping will begin this weekend. I am happy to take deposits to secure any parts until they have been stripped and are ready for dispatch. Happy to ship Worldwide if you are happy to cover the costs involved.

Perrin fuel rail kit Newage fit for top feed injectors complete with ID1000 injectors 2 years old with little use. £450 may split *injectors sold*

http://i69.photobucket.com/albums/i4...psfe007b26.jpg

MD321T Billet turbo with zero miles since refresh and tested by Turbo Dynamics £1100 *provisionally sold*
GT Style 3 bolt headers with up-pipe and a roll of wrap £200 SOLD

http://i69.photobucket.com/albums/i4...ps4373a97c.jpg

6 Speed non dccd gearbox complete with shafts, rear diff, prop, gear linkage and 6 speed starter motor p.w.o £1500
Syvecs S6 engine management system c/w Lambda kit £1250
Engine loom with sensor pack to run AVCS in a classic £250
Toucan £300 SOLD
Pink STI lateral rear links pillowball, inc droplinks (just new) and Two extra rear arms to support diff £400 v.g.c 8 arms in total 4 lateral 2 diff support and 2 forward running
Rear Whiteline anti roll bar painted Pink to match laterals £80 (1 year old)
Sump Guard £50

http://i69.photobucket.com/albums/i4...ps71dbe4a1.jpg

Zero sports undertray version 3/4/5/6 £80

http://i69.photobucket.com/albums/i4...ps30601dae.jpg

6 pot Hi Spec monster front brakes c/w 355mm discs freshly skimmed £475
Jun style version 5/6 3 piece splitter new and boxed £90 (polyurethane)
RCM block rebuild kit (cost £146) £120
ARP case bolt set used but very good £200
RCM reverse bonnet vent in Rally Blue £80 SOLD
Pair of Front Ohlins fixed platform adjustable shocks (no springs) v.g.c £200
Version 5/6 front grill in v.g.c all clips intact £30
10 point dashdodger bolt in roll cage, has door bars floor brace and crossbar £550

Heavier parts will need to be pallet transported but I should be able to help with that.

Please allow that the earliest parts can be dispatched is early next week. I do not require full payment until I have the goods ready to go. A simple deposit secures. Parts will be photographed for inspection before I ask for full payment. My health isn't great and I am relying on help to strip and pack so please be patient. Please check my seller feedback I dont mess around.

Other parts inc shell (3 door with ABW arches)will be available in due time

pm'd. Oh and sorry to hear you're not well :(

Hi mate hope you are ok and can I get pic of the grill thanks

Will do this evening as I have it in the garage. It's the 3d type I had bought as I was going to change the front end to version 5

You have a pic of the sump guard?

I think it's off the car so will take a pic 2moro. It's the smaller type in alloy.

Ok mate put me down for it pending pic mate

hi bud do u have a pic of this sump guard?

Picture of the car?

what size is the rear anti roll bar ?

also have you got alloys solid Rear drop links ?
anti lift kit ?
front roll bar ?
front drop links ?

Is it the car thats in your profile garage?

If so, and youre selling the 3 piece splitter, i'll have it off you. Price/condition pending of course.

Cheers

Pic of the brakes and discs please , also do they inc pads

No the sump guard ?

Hi mate pics of fuel rails and injectors when your ready :thumb:

Sorry to hear about the bad health :(

Good luck with the sale, just wondering if you have any decent pulleys ?

Send me payment details for the injectors pease so i can send a deposit to secure the sale.:thumb:

Pics of the car in my garage. Will follow up on all enquiries in the morning.

Edit..
Just realised there are no up to date pics in the garage. Will upload some soon

Can i ask how old is the toucan and what is the condition does it come complete with mounting bracket.

Regards
Andy

Hi
Also pics of the full car minus the engine and turbo
Pm me a price if you like

The toucan I bought from Paul Blamire just a few weeks ago from a fairly new build. Comes with mounting bracket and loom. I paid £315 delivered and just trying to recover my outlay.
£300 delivered if it helps

any chance you can reply to my post about 8 up from this ;-)

Apologies I missed it. Front bar is sold I need to measure the rear bar but it's still on the car. Rear droplinks are STI accessory (recently bought from rhd Japan) and are being sold with the lateral arms which they were designed for. Front droplinks are standard. Anti lift kit was just the standard reversed/flipped mod so no different from what you have.

Pads included although half worn. Will upload pics as soon as off the car. Discs have not been run since skimmed.

It is yes but it's not perfect Im afraid.

Are you selling the 3 piece splitter on your garage pictures?

Thanks

Sorry, must have posted at same time.

You have PM

Really wanted the injectors and rails :( so how much are

The rails on there own please :thumb:

Hi mate you got them pics yet thanks

pic's of the rcm block and headers please

I cleaned up the headers a little today and took photo's. I cannot find a manufacturers mark on them. However they did work very well. I have standard 3 bolt up pipe in another shed and it is included. Also uploaded a photo of the car for those interested in the shell.

http://i69.photobucket.com/albums/i4...ps7f904c31.jpg

http://i69.photobucket.com/albums/i4...ps6e030151.jpg

http://i69.photobucket.com/albums/i4...ps590c7225.jpg

http://i69.photobucket.com/albums/i4...psdbf69855.jpg