ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   Chocolate internals claimed another 2.5 (https://www.scoobynet.com/general-technical-10/996520-chocolate-internals-claimed-another-2-5-a.html)

NuNu9977 03 February 2014 05:54 PM

Chocolate internals claimed another 2.5
 
Oh well number 3 piston gone :thumb:

the shreksta 03 February 2014 05:55 PM


Originally Posted by NuNu9977 (Post 11343270)
Oh well number 3 piston gone :thumb:



http://realstreetperformance.com/Sho...gine/Subaru_2/

:D:D:D

scooby1929 03 February 2014 06:20 PM

What year and mileage?

NuNu9977 03 February 2014 06:22 PM


Originally Posted by scooby1929 (Post 11343309)
What year and mileage?

2007 & 55000 not much at all really :(

Hawkeye D 03 February 2014 06:32 PM

That'll be the bad news you had the other day then.

Sorry to hear this. Are you going to forge it now?

Steve's Sti 03 February 2014 06:57 PM

Happens to the best of us lol gettin it forged and be safe

scooby1929 03 February 2014 08:04 PM

Sorry to hear that. Was she the WRX or an STI?

NuNu9977 03 February 2014 08:51 PM


Originally Posted by scooby1929 (Post 11343451)
Sorry to hear that. Was she the WRX or an STI?

Is wrx. Just been to pay for it should be sorted nice forged bits. :thumb:

scooby1929 03 February 2014 09:49 PM

Was she standard or modified. I have not heard of that many of the hawk WRXs failing it was mostly the STI. Mines at 30k so while I quite like it not enough to spend thousands on it. Its hard to justify the crap mpg and high tax group. Glad you are on the ball and getting sorted.

craigybaby 03 February 2014 09:59 PM

Oh man sorry to hear that pal oh well least it's a good excuse to up those ponys wms racing currently have a set of forged rods and pistons on eBay might be worth watching :)

http://bit.ly/MTB4s4

NuNu9977 03 February 2014 10:28 PM


Originally Posted by craigybaby (Post 11343590)
Oh man sorry to hear that pal oh well least it's a good excuse to up those ponys wms racing currently have a set of forged rods and pistons on eBay might be worth watching :)

http://bit.ly/MTB4s4

Already sorted craigy, been n seen her tonight, but she's in the best hands. :thumb: Big thanks though :thumb:

NuNu9977 03 February 2014 10:30 PM


Originally Posted by scooby1929 (Post 11343578)
Was she standard or modified. I have not heard of that many of the hawk WRXs failing it was mostly the STI. Mines at 30k so while I quite like it not enough to spend thousands on it. Its hard to justify the crap mpg and high tax group. Glad you are on the ball and getting sorted.

Modified to get 291bhp & 371lb of torque. Full 3"turbo back plugs, pump, filter.
Not a great lotta mile from me but I drive hard. (Well it ain't a mini metro) :thumb:

craigybaby 03 February 2014 11:09 PM


Originally Posted by NuNu9977 (Post 11343625)
Already sorted craigy, been n seen her tonight, but she's in the best hands. :thumb: Big thanks though :thumb:

Ahh no worries mate keep us upadated Im watching those bits myself might go for it if they stay in budget lol

NuNu9977 04 February 2014 08:27 AM

Think my builder is using wiseco pistons. Dobt really know what there worth plus would always be warey off eBay for items with such importance. With so many fakes knocking around. (Not sayin they are more than likely a real reputable seller) just there's a lot of bad sellers selling **** which clouds us. ;)

TheWaterboy 04 February 2014 09:43 AM

Sounds expensive, thinking twice now before getting mine remapped! But like already has been stated not heard of many WRX Hawkeye failures so fingers crossed.

NuNu9977 04 February 2014 09:55 AM


Originally Posted by TheWaterboy (Post 11343785)
Sounds expensive, thinking twice now before getting mine remapped! But like already has been stated not heard of many WRX Hawkeye failures so fingers crossed.

You been living in a bubble hehehehe I've seen a few.
Don't think it's owt to do with mapping think it's just luck of the draw
Lad on NESF running around 360 and been fine were some standard ones have gone think it's driving style. Oh well I'm not fussed it's getting sorted :D

wms-racing 04 February 2014 09:58 AM


Originally Posted by NuNu9977 (Post 11343745)
Think my builder is using wiseco pistons. Dobt really know what there worth plus would always be warey off eBay for items with such importance. With so many fakes knocking around. (Not sayin they are more than likely a real reputable seller) just there's a lot of bad sellers selling **** which clouds us. ;)

I'm selling them:thumb:

TheWaterboy 04 February 2014 10:02 AM


Originally Posted by NuNu9977 (Post 11343793)
You been living in a bubble hehehehe I've seen a few.
Don't think it's owt to do with mapping think it's just luck of the draw
Lad on NESF running around 360 and been fine were some standard ones have gone think it's driving style. Oh well I'm not fussed it's getting sorted :D

That's a good attitude to have! I suppose if it goes just have to get it sorted or shove in a 2.0 Sti motor :idea:

NuNu9977 04 February 2014 10:55 AM


Originally Posted by TheWaterboy (Post 11343803)
That's a good attitude to have! I suppose if it goes just have to get it sorted or shove in a 2.0 Sti motor :idea:

Well I thought I could whinge n bitch about it
It would still be broken?!? So I bit the bullet just delt with it.
Think it's when it goes rarther wham if it goes. :thumb:

NuNu9977 04 February 2014 10:59 AM


Originally Posted by wms-racing (Post 11343794)
I'm selling them:thumb:

Like i said good sellers are over ruled by bad. I like eBay as a rule
Certain items I'd steer away from. Now should sort a deal with craigybaby he knows he wants them ;)

craigybaby 04 February 2014 07:02 PM

Make sure u take plenty of picys of the build and ha I would love them but my funds are a bit tight atm lol

jazzyjembreaze 04 February 2014 07:34 PM

Oh no NuNu / when did this happen ?

NuNu9977 04 February 2014 08:25 PM


Originally Posted by jazzyjembreaze (Post 11344329)
Oh no NuNu / when did this happen ?

It didn't as such go. Noticed last week using loads of oil.
Been smoking for a few weeks. Mate looked over it. N said it's ok.
Day later I wasn't happy Saturday nite took to Andy Kindon (scooby specialist)
Done a lot of forged engines for NESF members. It's in good hands ;)

jazzyjembreaze 04 February 2014 08:42 PM

Yea . Andy will sort it
Keep us informed on the build :)

NuNu9977 04 February 2014 09:08 PM

I'm prob gonna try get over this week. See how things are progressing.
Thanks for support lads. Will be amazing when sorted ;)


All times are GMT +1. The time now is 11:57 AM.


© 2024 MH Sub I, LLC dba Internet Brands