WILL WRX HEADS FIT STI SHORT BLOCK
Can I just ask a few engine builders will my bug wrx 2001 heads fit onto an sti v7 short block as im wanting to do this to save some cash, as im looking to go 400 bhp on my bugeye.
some one told me the ports on a wrx are smaller and wont rev as high, as the cam profile is different. That's why the wrx rev to 8k and sti 9-10 k. Any help appreciated. I don't really know anything about engine building , just going on what ive been told. |
Yes they will fit.
Cam lift and duration is less on the WRX heads but shouldnt restrict you in achieving your target figures with the correct supporting mods. Mick |
Originally Posted by merlin24
(Post 11317364)
Yes they will fit.
Cam lift and duration is less on the WRX heads but shouldnt restrict you in achieving your target figures with the correct supporting mods. Mick thanks pal, can anyone else confirm this aswell? |
Yes as that's what I used to have,While the heads are off give them a little bit of a port.i have some used wrx heads for sale if you want mate,also the heads can go past 400bhp
|
My WRX heads are running 450bhp and are fine
|
Running v5 wrx heads on a v8 sti short block, no dramas,
|
Running Quad AVCS JDM Legacy 2.0GT heads on an STi 8 short engine too - enabled Mr Carr to push my boost a little in safety :D
|
Mick, what ecu you use to run the dual avcs?
|
Originally Posted by chrisn8601
(Post 11318658)
Mick, what ecu you use to run the dual avcs?
|
All times are GMT +1. The time now is 11:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands