1 Attachment(s)
This Subaru has 18x12 wheels and 5x100 hub. I have not heard that he would have been some problems with the bearings.
Attachment 58356 |
Originally Posted by Psyge
(Post 11298768)
This Subaru has 18x12 wheels and 5x100 hub. I have not heard that he would have been some problems with the bearings.
|
Me please, bugeye with blobeye front although I don't have flared front wings?
|
1 Attachment(s)
Originally Posted by kevfawcett
(Post 11298813)
Thanks, that's good to hear. Do you have any more pictures of the car?
Attachment 58360 |
I like the fitment
|
Really wanted these when I had my hawk. But us prices made them over £600 plus import. So great price
|
Originally Posted by JonMc
(Post 11298638)
I reckon the wheel with some decent rubber would set you back £1k+ on their own, plus £300 for the arches £100-200 for paint (and I have a custom lacquer so to end of that) plus cut and weld the arched, especially the rear where the inner and outer arch will need to be rejoined, and prime, paint and underseal to prevent future rust I can't see it coming in for a £1k:wonder:
XXR 521's come in at £600 Arches in at around £300 if not a little bit less perhaps I have tyres knocking about so not a problem Then just paint.. so maybe a couple hundred? So 1K or there abouts.. Even if it was a bit more, as long as ben is able to produce something that isn't far off the originals then its a good deal. |
I have a set of rota fighters 18/10 et20 rubber 265 toyo 888 I think they will work
:wonder::thumb: |
They would work a treat.
|
Originally Posted by 6VOLT
(Post 11299037)
Even if it was a bit more, as long as ben is able to produce something that isn't far off the originals then its a good deal. |
3 Attachment(s)
Originally Posted by 6VOLT
(Post 11299251)
They would work a treat.
Attachment 58344 Attachment 58345 Attachment 58346 |
Look great. I'll have to see what funds are like in the new year before I put my name down.
|
Have you done them yet LOL:lol:
I found these they look aggressive I like an aggressive look :thumb: http://i469.photobucket.com/albums/r...ps7381c70c.jpg |
Would think that my 9.5 inch wheels would not be enough for these bad boys!!!
Would you be looking at 255/40/18 as a minimum??? |
IIRC most of the lads in America run a 295 wide tyre. A 9.5" wheel would look lost, unless it had a negative offset which would be crazy
|
2 Attachment(s)
Here's another one I found :thumb:
Attachment 58347 Also found this can you make this bonnet scoop in carbon ? :thumb: Attachment 58348 I just have to much time on my hand lol:thumb: |
Originally Posted by CarBen Fibre Creations
(Post 11297929)
Nice one thanks guys, keep em coming :)
1. Badbadleeroybrown - Bugeye 2. Psyge - Blobeye 3. Fraser - Bugeye (blob rear) 4. 6VOLT - Blobeye 5. Anger- Blobeye 6. Johnnybon - Blobeye |
Where did you find the photo of that bonnet scoop?
1. Badbadleeroybrown - Bugeye 2. Psyge - Blobeye 3. Fraser - Bugeye (blob rear) 4. 6VOLT - Blobeye 5. Anger- Blobeye 6. Johnnybon - Blobeye 7. Robthompson719 - blobeye I'll look into getting some Blob arches in stock and tested in Jan so we can manufacture them asap :) |
I can't remember I had it in my photos for a year or two :confused:
can you look into it as I would love one and I'm sure others would to:thumb: |
Out of curiosity, will the bug ones be a long time behind?
|
Originally Posted by johnnybon
(Post 11308262)
I can't remember I had it in my photos for a year or two :confused:
can you look into it as I would love one and I'm sure others would to:thumb:
Originally Posted by BadBadLeeroyBrown
(Post 11308623)
Out of curiosity, will the bug ones be a long time behind?
|
Originally Posted by CarBen Fibre Creations
(Post 11309897)
I'll have a look about see what I can find, it'd be handy to find out where it comes from first.
As soon as I get 5 or more people interested I'll look into it :thumb: |
You will be able to have 18x10/18x11 and its recommended you have at least 10.5 +15.
1. Badbadleeroybrown - Bugeye 2. Psyge - Blobeye 3. Fraser - Bugeye (blob rear) 4. 6VOLT - Blobeye 5. Anger- Blobeye 6. Johnnybon - Blobeye 7. Robthompson719 - blobeye 8. SCOOBYD00 - Blobeye I will post up details of prices once the flares arrive. I will require at least 6 people interested in each model (bug/blob/hawk) before I make a start on the project, this is because each set requires different moulds. Once I have 6 people I will ask each person with that model for a £50 deposit. Once the moulds are complete I will invoice for the remainder of the balance and then send out the flares, this could take a while depending on our workload so please be patient :) Group buy rates will be based on the overall list (all models), once I have prices worked out I will be able to let you know how much discount can be offered Hope that makes sense guys :thumb: |
1 person has dropped out for the Blobeye arches, as soon as we have another person interested I'll invoice all 6 of you for the £50 and start manufacturing them
1. Badbadleeroybrown - Bugeye 2. Psyge - Blobeye 3. Fraser - Bugeye (blob rear) 4. 6VOLT - Blobeye 5. Anger- Blobeye 6. Johnnybon - Blobeye 7. SCOOBYD00 - Blobeye |
Originally Posted by CarBen Fibre Creations
(Post 11311146)
1 person has dropped out for the Blobeye arches, as soon as we have another person interested I'll invoice all 6 of you for the £50 and start manufacturing them
1. Badbadleeroybrown - Bugeye 2. Psyge - Blobeye 3. Fraser - Bugeye (blob rear) 4. 6VOLT - Blobeye 5. Anger- Blobeye 6. Johnnybon - Blobeye 7. SCOOBYD00 - Blobeye Need a car? :D |
Yes we will everything will be test fit before moulding, our show car is a blob so we have it covered.......nice try though haha ;)
|
1 Attachment(s)
:luvlove: I'm very interested, need to check with Ryan the cost of painting etc. Need to find out if the hawkeye version can modded to fit a custom bumper, other newage versions maybe better :thumb:
Attachment 58349 |
1 Attachment(s)
Where do I stand on my front wings as I said they are not flared?Attachment 58357
An don't take this the wrong way but what difference are these arches compared to a ebay universal fiberglass ones . Thanks |
1. Badbadleeroybrown - Bugeye
2. Psyge - Blobeye 3. Fraser - Bugeye (blob rear) 4. 6VOLT - Blobeye 5. Anger- Blobeye 6. Johnnybon - Blobeye 7. SCOOBYD00 - Blobeye 8. ZX-TT - Bug front / Blob Rear |
Originally Posted by r33gts2009
(Post 11311328)
Where do I stand on my front wings as I said they are not flared?http://i1061.photobucket.com/albums/...a605f56b69.jpg
An don't take this the wrong way but what difference are these arches compared to a ebay universal fiberglass ones . Thanks Jura |
All times are GMT +1. The time now is 04:18 PM. |
© 2024 MH Sub I, LLC dba Internet Brands