Some nice parts forsale
Lightweight pulley set for classic. Removed from v6 may fit others. Good, used condition. could do with a clean and would come up lovely with abit of a polish. SOLDhttps://scontent-a-lhr.xx.fbcdn.net/...35327194_n.jpg
Classic high level rear spoiler with brake light. Painted in 51E white. Few marks here and there and a couple of LEDs are not working in brake light. SOLD Collection only or you can arrange your own courier and be held responsible for any damage in transport.https://fbcdn-sphotos-b-a.akamaihd.n...64687458_n.jpghttps://fbcdn-sphotos-c-a.akamaihd.n...07007435_n.jpg 3" to 2.5" open bell mouth stainless steel decat downpipe. Unknown make. Has a few marks and has been bottomed out and scratched bottom. None of this affected the performance.SOLD https://fbcdn-sphotos-e-a.akamaihd.n...03388716_n.jpghttps://fbcdn-sphotos-b-a.akamaihd.n...55182320_n.jpg Tein flex rear coilovers. One is leaking other is still ok. Spring and height adjusters move freely as all threads have been kept clean and greased. Fitted with pollow ball top mounts and fully working edfc motors. Again offers on these they are worth what ever anyone is willing to pay for them. https://scontent-b-lhr.xx.fbcdn.net/...35188231_n.jpg Fidanza lightweight flywheel. 4.5kg. Retail at £225 new. This has seen no more than 500miles use. Great peice of kit! Instead of having to replace or skim flywheel every time your clutch goes you simply replace the removeable friction plates which are about £80 a pop. SOLD https://scontent-b-lhr.xx.fbcdn.net/...58607089_n.jpg https://scontent-b-lhr.xx.fbcdn.net/...32859389_n.jpg Unknown make headers. Please note these are not crap!! They made 370bhp on my standard internal ej20 running vf35 and other supporting mods. When I had it mapped by Duncan (race dynamics) he said they were flowing very well and not restrictive in anyway. They have been modified by myself. I match faced and ported all the flanges. Put a new flexi in the up pipe. Cut open where the 4-1 meet and flowed them out. SOLD (please note the yellow dust in photo is paint from a hacksaw blade lol) https://scontent-a-lhr.xx.fbcdn.net/...48383380_n.jpg https://fbcdn-sphotos-h-a.akamaihd.n...59165530_n.jpg https://fbcdn-sphotos-b-a.akamaihd.n...84848785_n.jpg https://fbcdn-sphotos-d-a.akamaihd.n...25311045_n.jpg https://fbcdn-sphotos-c-a.akamaihd.n...91907477_n.jpg https://fbcdn-sphotos-a-a.akamaihd.n...52928695_n.jpg Walbro fuel pump 255lph fitted to classic tank mech. Could be removed to fit to other model impreza. Genuine pump, can supply part numbers etc if needed. £40 delivered https://scontent-b-lhr.xx.fbcdn.net/...89352760_n.jpg Subaru 4 pot front calipers. I had these shot blasted in the intention of refurbing but then decided to go for late spec brembos. Have been sat in the garage for a while and have got some slight surface rust but nothing a quick wire wheel wouldn't sort. Again offers on these, can't really put a price to them as they are worth what ever someone's willing to pay for them I suppose. https://fbcdn-sphotos-h-a.akamaihd.n...70866958_n.jpg Whiteline rear anti roll bar drop links and rear anti roll bar 'D' bushes. Good condition SOLD https://fbcdn-sphotos-f-a.akamaihd.n...96969468_n.jpg Classic genuine rubber rear spats (not cheap fibreglass crap) and rear arch protectors. Colour coded in 51E. Age related marks as expected but in overall good condition. The rear spats have had 3m clear protection vinyl applied where they are in direct line to the rear wheels to protect from damage/wear. The rear arch protectors do not have any clips attached and will require bonding on (this is how they were fixed to my classic. £35 delivered https://scontent-b-lhr.xx.fbcdn.net/...07617455_n.jpg Eibach rear camber bolts. SOLD https://fbcdn-sphotos-g-a.akamaihd.n...09607660_n.jpg OMP steering wheel boss. Removed from classic, may fit others. Unsure on all the steering wheels that this fits but I had a momo bolted to it. This was about £50 new SOLD https://fbcdn-sphotos-e-a.akamaihd.n...14356308_n.jpg Mocal thermostatic oil cooler take off fitted with Mocal aeroquip pipe, 1/2" fittings and fire sleeve. Good condition, thermostat works fine, a little dusty from being in the garage £50 delivered. https://fbcdn-sphotos-c-a.akamaihd.n...13743350_n.jpg https://fbcdn-sphotos-d-a.akamaihd.n...84910963_n.jpg Open to sensible offers on everything. Can be posted or collected from Norfolk. All items sent will be sent recorded. Can be paid in person on collection, via bank transfer or by paypal but please note if paying by paypal there will be a 3.5% fee to cover paypal charges unless you want to pay as gift. Thankyou, Luke |
I know you said offers on bits but..... What price for the four pots as had mine done and only one knackered....
Pm me a ball park and we can barter. ;) |
Pm'd gc8-r
|
I'll take the rear camber bolts please mate, will pm you as well.
|
Camber bolts sold!
|
I'll take drop links
|
Pm replied SDRB
|
PM sent.
|
How much lighter is the flywheel mate? I'm interested in the flywheel
|
Interested in the Walbro
|
Pm sent
|
Originally Posted by Ashp1989
(Post 11287747)
How much lighter is the flywheel mate? I'm interested in the flywheel
|
Originally Posted by scoobynshag
(Post 11287784)
Interested in the Walbro
Numbers from the pump are as follows; GSS 314 08706-1 PAT 4500270 5421306 |
All other Pm's replied
|
PM Sent
|
Furiokid, replied.
|
Steering wheel boss sold!
|
Headers sold!
|
Originally Posted by Badger_88
(Post 11288143)
I think standard flywheels weigh between 10-12kg, this one weighs 4.5kg :thumb:
|
Originally Posted by Ashp1989
(Post 11288449)
Will I need new stretch bolts? We're could I source some from? And is the friction plate still in good condition? I get paid on Thursday and if u have still got it il have it :thumb:
The friction plate has done less than 500miles so is fine. When I fitted this it was fitted along with a brand new exedy stage 1 anti judder clutch. Ok will wait to hear from you Thursday, if you defiantly want it I will hold it for you :thumb: |
Originally Posted by Badger_88
(Post 11288480)
I've never replaced flywheel bolts, always used originals and never had any problems. I don't think they are stretch bolts on subarus. If you want to replace them http://www.importcarparts.co.uk/part...en=&searchKey= they are not a lot of money.
The friction plate has done less than 500miles so is fine. When I fitted this it was fitted along with a brand new exedy stage 1 anti judder clutch. Ok will wait to hear from you Thursday, if you defiantly want it I will hold it for you :thumb: |
Originally Posted by Ashp1989
(Post 11288584)
Cheers buddy. This will fit my v5 type right? Lol.
|
Pm sent
|
Decat sold!
|
Flywheel sold!
|
Lightweight pulley set for classic.
wil this fit a 96 wrx? how much shipped to oslo, norway? |
Also interested in pulleys, price posted to Wiltshire please?
|
Originally Posted by slasherkill
(Post 11295792)
Lightweight pulley set for classic.
wil this fit a 96 wrx? how much shipped to oslo, norway? Yes these will fit a 96 wrx. I will find out shipping cost and let you know as soon as possible. Ross0604 pm'ed |
I know its ful. Just find the price and post it here please.
|
I'll take the Lightweight pulley set for classic, but is it underdriven?
|
All times are GMT +1. The time now is 12:02 AM. |
© 2024 MH Sub I, LLC dba Internet Brands