ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Other Marques Parts (https://www.scoobynet.com/other-marques-parts-452/)
-   -   SABELT harnesses 2 pairs. (https://www.scoobynet.com/other-marques-parts-452/987616-sabelt-harnesses-2-pairs.html)

ScoobyForLife27 13 October 2013 10:47 PM

SABELT harnesses 2 pairs.
 
Hi guys.

I have for sale my Sabelt harnesses with VERY little use. Absolutely no damage, rips etc. Some dirt marks but nothing serious.
I have them from new from Demon Tweeks.

These are road legal. These cost £78 plus delivery new.

PRICE: £100 Posted ONO

http://i1184.photobucket.com/albums/...ps30ff3ed1.jpg

http://i1184.photobucket.com/albums/...ps6efe1029.jpg

http://i1184.photobucket.com/albums/...ps68641e10.jpg

ScoobyForLife27 13 October 2013 10:48 PM

Link with description
http://www.demon-tweeks.co.uk/motors...elease-harness

ScoobyForLife27 14 October 2013 11:53 AM

SOLD

wrx5343 12 February 2014 01:44 PM

Hi mate, sorry to bump your old thread, but do these fit with a stock wrx seat ? Im thinking about getting some for a track day

ScoobyForLife27 12 February 2014 11:28 PM

Hi. No worries mate :-)

If you are asking about rear seats, yes, they fit but they weren't in straight line. I mean using OEM rear seat seat belt mounting points straps are slightly moved to one side so they are not going exactly straight through that hole in OEM front seats if you know what I mean ?.
As for front seats I had to modify them slightly. Basically I drilled two holes (one on each side of the seat) and bolted harnesses eye bolts.
I should have some pics before and after its done so you could have I look :-)

ScoobyForLife27 12 February 2014 11:39 PM

Sorry, just remind myself, actually you have to drill one hole in each seat (inner side) as on outer side you're using factory mounting points were OEM seat belts are attached.
Just checked and don't have those pics on my phone anymore so will have to send them from my laptop. I'll do it tomorrow buddy.

ScoobyForLife27 12 February 2014 11:59 PM

Not the best pictures but you'll have rough idea. These are taken when stripping the car for fitting roll cage.

http://i1184.photobucket.com/albums/...ps0a5ec6c4.jpg

http://i1184.photobucket.com/albums/...psc61df90a.jpg

http://i1184.photobucket.com/albums/...ps2d9ef995.jpg

ScoobyForLife27 13 February 2014 12:07 AM

If you use the factory mounting points from rear seat belts, only issue will be that one of the straps will be rubbing your neck slightly due to not being align properly. Obviously you won't have this problem if 4 point harnesses are used.

wrx5343 13 February 2014 05:00 AM

Cheers for that, i was only going to use it for about 30 mins on track anyway and have no plans for any cage or bucket seats


All times are GMT +1. The time now is 03:17 PM.


© 2024 MH Sub I, LLC dba Internet Brands