ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   injectors good for 450bhp - 500bhp (https://www.scoobynet.com/general-technical-10/986282-injectors-good-for-450bhp-500bhp.html)

Tyler 1 26 September 2013 03:31 PM

injectors good for 450bhp - 500bhp
 
What injectors are good for these sort of figures?

And what should 550cc's max out at?

banny sti 26 September 2013 03:37 PM

550s will see just over 400, you would need 740s for 450+

stonejedi 26 September 2013 03:53 PM

As above but there is a lot of different variables depending on your fuel set up,i.e uprated FPR,uprated fuel pump,external fuel pump with swirl pot set up,and what duty cycle % you will be looking to run your injectors at,you don't really want your injectors maxed out for your desired bhp so give your self some headroom when making your choice,as banny has said 740cc or there abouts would be my preferred choice.SJ.

Tyler 1 26 September 2013 04:00 PM

Cheers guys, what sort of price am i looking at for a set of 740cc second hand. My mate also did say i need to get a FPR..

stonejedi 26 September 2013 04:09 PM


Originally Posted by Tyler 1 (Post 11219388)
Cheers guys, what sort of price am i looking at for a set of 740cc second hand. My mate also did say i need to get a FPR..

Mark @ Lateral performance modify Subaru injectors to run certain CC maybe a chat with him might be on the cards but price wise second hand from £150 upwards.SJ.

Tyler 1 26 September 2013 04:24 PM

Cheers SJ i forgot about Mark.. :)

jura11 26 September 2013 04:33 PM

Hi Tyler

You will need as above 740cc,with those we run 490bhp and has copped nicely like with V-Power and methanol plus with NOS

And as above speak with Mark@Lateral Performance about the reflowing yours injectors to higher cc or speak with Paul@Zen Performance about their injectors

Jura

Tyler 1 26 September 2013 04:42 PM

Thanks Jura, appreciated.

Are you running a FPR?

jura11 26 September 2013 04:51 PM


Originally Posted by Tyler 1 (Post 11219429)
Thanks Jura, appreciated.

Are you running a FPR?

Hi Tyler

Yes we run FPR with the Fuel rails etc and Fuel pressure has been set at 2.0bar on idle and on full boost has raised up to 3.8bar

Jura

Tyler 1 27 September 2013 10:59 AM

Cheers Jura, what FPR are you using?

Is Sard any good?

JGlanzaV 27 September 2013 11:31 AM

Sard is one of if not the best :)

jura11 27 September 2013 02:25 PM


Originally Posted by Tyler 1 (Post 11220053)
Cheers Jura, what FPR are you using?

Is Sard any good?

Hi Tyler

I've never used SARD,we are using Fuelab and we are been very happy with Fuelab



Jura

stonejedi 27 September 2013 02:49 PM

Tyler fuelab is where you want to be at,Sard do make good FPR but there is so much fAKE Sard FPR about you don't know what your getting I have had a fuelab on my own car now for seven years and it has never giving me any problems.SJ.

Tyler 1 27 September 2013 03:17 PM


Originally Posted by jura11 (Post 11220204)
Hi Tyler

I've never used SARD,we are using Fuelab and we are been very happy with Fuelab



Jura

Thanks Jura


Originally Posted by stonejedi (Post 11220232)
Tyler fuelab is where you want to be at,Sard do make good FPR but there is so much fAKE Sard FPR about you don't know what your getting I have had a fuelab on my own car now for seven years and it has never giving me any problems.SJ.


Ok i will have a look, thanks again mate. Been offered a Sard limited edition brand new for £120, £150 brand new i have been told, i have no clue about these at all.

jura11 27 September 2013 03:33 PM

Hi Tyler

Speak with Alyn@AS Performance about the Fuelab FPR


Jura

stonejedi 27 September 2013 03:33 PM

This might be of some help mate.http://www.more-japan.com/blogs/2012...re-regulators/SJ.

Tyler 1 27 September 2013 08:52 PM


Originally Posted by jura11 (Post 11220256)
Hi Tyler

Speak with Alyn@AS Performance about the Fuelab FPR


Jura


Originally Posted by stonejedi (Post 11220257)

Guys you are both legends, really appreciated. I have ordered some parallel fuel rails from cdf racing and will get the fpr at some point.. Then just need to either send my injectors off or send mine off :)

Thanks again


All times are GMT +1. The time now is 11:47 PM.


© 2024 MH Sub I, LLC dba Internet Brands