3 port boost solenoid
 

Hi all,
In preparation for the hawks remap I have been advised to get a 3 port solenoid.
Needs to fit a sti hawk.
Will need the loom to connect to engine harness.
Thanks, Sam

Drewetts on here sells them

Drewtts does them IIRC for £48 delivered, but you'll have to sort the wiring (I think he supplies the connector you'll need though).

If of interest, we do them complete with a short cable that plugs straight in to the OEM loom for £66 delivered.

What sort of boost do you plan to have the car mapped?
You don't really need it for anything up to 1.3 bar or so.

Hi all,
Yes I've pm'd Drew.
This is going to sound stupid but I'm not remapping for power!
The car is running so bloody rich due to exhaust and probably dump valve that in the long run paying out for a remap will save fuel and damage!
It's been suggested to get one but as I said I'm not remapping for power.
Is it not worth it!
Thanks, Sam

Im getting my map redone as i have fitted a fmic running 414bhp now till thursday and andy f says i dont need a 3port as the 2port holds boost car is 05sti

Tracktive Solutions/Richard Bulmer told me the same, no need for a 3 port.
Don't waste your money.
Who told you that you need one?
PM if you prefer not to write here.

I've had a bit or crack via pm with Sam n for what he's looking for its not needed at the leave he's at.

:thumb: