2004 Blob eye wrx hds coilovers
hi im looking for some help I have just bought some hds coilovers from driftworks with adjustable camber plates also I have hardrace rear adjustable arms what is the best height for the Scooby that it won't cause damage also the geo settings that would work best for fast road thank you
|
Best ride height depends on more factors there,if you will lower too much you can have problems with handling,but still I would advise get Roll centre/Bump steer mod in any case,if you are intending to lower yours car
We are running HSD HR with Hardrace Adjustable Lateral Arms/Links plus other bits and here are our setting,which has been spotless like on track or on the road Depends on wheels what you are running,but I would suggest add Camber bolts(pair of them cost around £20) http://i877.photobucket.com/albums/a...lignmentv2.jpg Jura |
I was thincking 40mm drop no more i will get the bits orderd 2 moz thank you very much
|
Sorry for got thay have camber plates at top of strut will still need bolts to ajust the camber
|
Hi there
Yes we have camber plates as you have,just pain with the HSD don't have damping adjustment on top of the strut,but on the bottom of the shock Don't set them too hard,because on hardest settings are very firm About the camber bolts,as i said,depends on tyres and wheels what you will be running,like we are running 9JX17" ET20 with 255/40 ZR17 or 245/40 ZR18 with 8.75X18",on those you will need to run camber bolts Camber settings depends where car will be mostly Jura |
Road mostly and havent decided on wheels at the moment just whant get handaling bang on first then wheel as thincking of a 6speed transmition swap
|
All times are GMT +1. The time now is 05:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands