ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   throttle body coolant by pass ? (https://www.scoobynet.com/general-technical-10/978774-throttle-body-coolant-by-pass.html)

savage bulldogs 27 June 2013 09:11 PM

throttle body coolant by pass ?
 
I'm fitting my new engine this weekend and was wondering whether it's worth doing the coolant by pass mod .As due to the layout of the scooby engine I'd doubt the throttle body would ever get cold enough to freeze . Therfore (id imagine) all it's doing is increasing the intake temps , or have I overlooked something ?
Cheers Clive

steviecrump 27 June 2013 09:14 PM

Correct,do it....

savage bulldogs 27 June 2013 09:20 PM

Seemed to make sence but ,it's always nice to get a second opinion .
Cheers chap

nyscooby 27 June 2013 09:24 PM

Easy mod.... do it!!

jazzyjembreaze 28 June 2013 12:21 AM

As above

joshnosh 28 June 2013 10:26 AM

only usefull if you live in Siberia then?

tubbytommy 28 June 2013 10:28 AM

Simple mod.
did mine ages ago.
do it

savage bulldogs 28 June 2013 06:43 PM

Thanks again for the comments fellas:thumb:
One more question though :rolleyes:do I by pass the icv as well (as the same feed runs through it ) or just by pass the throttle body ?

savage bulldogs 28 June 2013 08:40 PM

Thought id bump this as I need to know tonight ,whether to by pass the icv as well , cos I'll be fitting my forged self build tomorrow :-)
Cheers Clive

Turbotits 28 June 2013 08:49 PM

Yep just join the coolant hoses together. What year car? As mine only has the one inlet and one outlet. Nothing at all on the icv.

jazzyjembreaze 28 June 2013 08:50 PM

http://www.rexnet.com.au/forum/index...howtopic=43496

craigyp 28 June 2013 08:55 PM

does this actually do anything???

jazzyjembreaze 28 June 2013 08:58 PM

Nothing you will ever notice :)

savage bulldogs 28 June 2013 10:35 PM

thanks for the link bud :thumb:

im not to sure i'll notice any gains either but, could'nt see the point of having a tmic (which suffer from heat soak anyways)trying to cool the air only to be warmed by the throttle body having warm fluid pumped through it :wonder:

its a v3 fella and the feed for the throttle body comes from a small pipe from the block through the throttle body ,out the other side ,through the icv and back into the small bore water pipe
pic of my inlet with the pipe attached to the icv but not the throttle body
http://i664.photobucket.com/albums/v...psbd2692e9.jpg

propofol 29 June 2013 07:12 AM

If the hoses also go to the ICV then could this be to regulate the idle as the engine warns up? If you bypass this you may have a high idle at normal operating temperatures. I don't know this for sure but wondered why the coolant passed to the ICV?

marklythgoe 18 January 2017 04:45 PM

Sorry to bring up an old yhread can this be done on a blob eye 05plate wrx

sssssteeeee 22 January 2017 12:12 PM

i did this and had no problems , only danger is icing up in very low temps ( throttle sticks open ) its there really out of safety i think.


All times are GMT +1. The time now is 03:43 PM.


© 2024 MH Sub I, LLC dba Internet Brands