ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Projects (https://www.scoobynet.com/projects-40/)
-   -   my v6 sti project.. (https://www.scoobynet.com/projects-40/978118-my-v6-sti-project.html)

cjquicksilver 20 June 2013 07:56 PM

my v6 sti project..
 
49 Attachment(s)
well I thought I would start a thred about my project, the plans are ever changing as the project continues and what started out as a nice cheapish daily is now transforming into a track / fast road car!

car is being built by Nick @ car & custom garage in Bristol (www.carandcustomgarage.co.uk) with lots of custom work being done.

basically im trying to build a car using the best affordable and sourceable parts from the impreza range over the years, plus aftermarket parts of course!

right so the car...

I bought it as at the time I had sold my car and was on the look for a nice cheapish gc8 and this came up

Attachment 69064

Attachment 69065

v6 gc8 wich had rays wheels on and a power flow exhaust system, but the engine was freshly re-built using rcm parts, forged pistons, zero sports stat, etc etc so wil little miles on the engine I was happy to buy the car, and thought it would be a good basis for a few mods....

wasn't long after having it the modifications started..

interior was completely changed to full flocked set up, cobra suzuka gt seats, harnesses and a harness bar, plus set of prosports, wide band, knock link, new stereo, speakers, 18" inovit alloys, genuine 22b bonnet vents, tein flex coilovers with edfc, front lip splitter, zunsport grilles ra roof vent etc

Attachment 69066

Attachment 69067

Attachment 69068

Attachment 69069

Attachment 69070

Attachment 69071



after that stage I wanted to up grade the underside of the car to get better handling,
so fitted was a full newage sti rear end, sub frames, arms, hubs etc with a plated r180 4.44 rear diff, and a full set of brembo brakes also added.

plus I changed the exhaust to a haywood and scott down pipe, hks up pipe, and full haywood and scott system.

also all the arms etc I had powder coated, and completely polybushed with uprated zero sports arb

Attachment 69072

Attachment 69073

Attachment 69074

Attachment 69075

Attachment 69076

with the rear end all night and happy we altered the camber to a couple of degrees negative on the rear and it handled amazing! what a difference a diff makes!!

also changed the gearbox to a type r 4.444 box with dccd so she was nice and tail happy!!

Attachment 69077

this is then how she sat!
Attachment 69078

after driving around like this for a bit, there were a couple of issues with the dreaded rear arches. so off she went to the body shop to have them sorted

Attachment 69079

Attachment 69080

Attachment 69081

Attachment 69082

Attachment 69083

Attachment 69084

Attachment 69085

Attachment 69086

after that was all done, I drove her about for a bit and as usual got bored, so sat down and decided I would build a nicer engine bay, sort some rust issues around the screen, etc so back in the garage she went...

engine was taken out...

Attachment 69087

Attachment 69088

Attachment 69089

whilst engine was out I thought bollox to it, and decided to go the whole hog, and so now having a full wrc multi weld in cage put in, engine has been stripped and currently being done up with..

new rcm headers, rcm baffled sump kit, fresh vf34 turbo, toyo sports new fmic core inverted, custom stainless cooler pipes, setrab oil cooler, thermal spacers, polished inlet, new samcos, new rcm pullys, excedy stage one pink box, alcatek with l.c and a.l, 12mm oil pump, lateral rcm fuel pump, spec c anti serge swirl pot with -6 fittings, braided lines, etc etc etc etc lots being done, but as she stands now shes having the cage put in and being sprayed inside and out with new p2000 carbon spoiler being put on, morettes, 22b narrow bumper,

heres some random pix of different things,

Attachment 69090

Attachment 69091

Attachment 69092

Attachment 69093

Attachment 69094

Attachment 69095

Attachment 69096

Attachment 69097

Attachment 69098

Attachment 69099

Attachment 69100

Attachment 69101

also the front end is now changed to newage sti set up, and currently being powder coated, black and green, polybushed also cusco arb and sti spec c quick rack to go in!

Attachment 69102

also declutting the engine bay, new battery (odessey pc680 & washer bottle) being relocted inside car so took battery tray off.

Attachment 69103

also master cylinder and brake lines being custom made using type r non abs set up with ferodo ds2500 pads right round

Attachment 69104

also new bumper bar to mount cooler, as with most they rot away

Attachment 69105

interior all stripped out ready for new weld in cage to be fitted

Attachment 69106

new wheels revolution 18s with kumho inter cut soft tyres

Attachment 69107

carbon firewall set up

Attachment 69108

Attachment 69109

and this is how she is sitting at the moment awaiting cage,

Attachment 69110

Attachment 69111

Attachment 69112

so that's if for now, theres loads to do as you can see, but will get there eventualy lol
I will update as things are fitted / made, and go from there!
she will not be to everyones taste im sure so any constructive criticism welcomed :)

im looking forward to getting it going and doing some hill climbs, sprints etc

JonMc 20 June 2013 09:09 PM

Looking good, some choice mods and should be fun once complete:thumb:

csibee 21 June 2013 12:38 PM

Subscribed!

v5 man 21 June 2013 12:51 PM

Very interested in this one :D

jason_2013 22 June 2013 10:14 PM

Looking good. Do all the newage subframes and suspension parts just bolt on?

Kwik 23 June 2013 05:31 AM

Loving it:thumb:
btw how did you remove the battery tray? Mines a state.

sonic93 23 June 2013 09:57 AM

Looking good Cj

cjquicksilver 23 June 2013 10:41 AM

Cheers guys its getting there slowly

All frames etc with bolt on direct but you need the full kit to swap

Battery tray you have to drill the spot welds and carefully cut it out, takes a good few hours!

Will update shortly wen I get some more pics

beef-on-the-bone 23 June 2013 08:07 PM

looking great so far!!

cjquicksilver 24 June 2013 05:30 PM

cheers mate

Firez34 25 June 2013 10:48 AM

Love it fella.

sunny1989 25 June 2013 04:13 PM

very nice, those Revolutions should look superb!

stonejedi 25 June 2013 05:35 PM

Very nice.SJ.

cjquicksilver 25 June 2013 06:36 PM

Cheers guys for the comments off to see her tomorrow so will get some more pics to keep the thred updated

cjquicksilver 27 June 2013 10:38 PM

5 Attachment(s)
Well went to see the progress on the car today and so far so good, cage is about 50% completed and will be all sprayed up this time next week then she will have the full outside sprayed and a couple of rusty bubbles around the screen treated and looking as new again!

Few pics that I took today....

Attachment 69115

Attachment 69116

Attachment 69117

Also had my newage frame and alloy arms plus other bits back from powder coating and Nickle plating
Attachment 69118

Also collected my new front bumper which I've dropped off to be repaired and painted

Attachment 69119


More to come ......

sonic93 27 June 2013 10:43 PM

Who done cage how much?

JonMc 28 June 2013 06:27 AM

Nice, were did you get the nickel playing done as that is something I'm considering for bits and pieces at the moment:wonder:

cjquicksilver 28 June 2013 08:19 PM

2 Attachment(s)
it was done by a company in bristol

heres a better pic of the frame and arms etc
Attachment 69120


also took the mini version out for a spin, only down side is having to clean it after lol

Attachment 69121

CREWJ 29 June 2013 03:36 PM

Wow you really are going to town with this!

Subscribed

cjquicksilver 29 June 2013 04:33 PM

Trying to mate

Had many unfinished projects in the past but promised myself if finish this one, as have got pretty much all te bits I need and what I don't nick @ car&customgarage is making/ fabricating me, cooler pipes, fuel rails, etc

kevfawcett 29 June 2013 05:15 PM

I bought some paint to do my Milleniums in white a couple of days ago, I think I made the right choice after seeing yours

Very nice build mate

cjquicksilver 03 July 2013 04:05 PM

1 Attachment(s)
cheers mate

little bit of an update, the cage is nearly finished, and is going for spray tomorrow or friday, then the outside will be sprayed and then the bolting on of bits will begin!

Attachment 69122

BurtyBurg 03 July 2013 07:27 PM

Great build mate, well impressed so far!

cjquicksilver 03 July 2013 07:52 PM

cheers mate

cjquicksilver 06 July 2013 12:42 AM

2 Attachment(s)
Little update,

Cage now finished and painted, on to the outside now and hopfuly shell will be ready next week!!


All pointing to pillars done

Attachment 69123


And all painted, not to everyone's taste I'm sure but so thing different from white

Attachment 69124

More to come ....

cjquicksilver 07 July 2013 11:21 AM

4 Attachment(s)
Some more pix

Attachment 69125

Attachment 69126
Attachment 69127

Attachment 69128

prodriverules 07 July 2013 11:25 AM

Looking good mate but I would say I'd have gone darker on the green to match your other parts already done?

cjquicksilver 07 July 2013 11:42 AM

Ye I can appreciate that but unfortunately the spray work and powder coat were done at the same time at different company's
But once the inside has the new seats, firewall etc in should be less 'in your face' if that makes sense

STu-PiD 07 July 2013 11:12 PM

That bumper looks strangley familier!

cjquicksilver 09 July 2013 09:51 PM

1 Attachment(s)
Ye I swapped for magic beans and anal from a chap by Weston lol

Little update outter skin just being sprayed now :-)

Attachment 69129


All times are GMT +1. The time now is 10:56 PM.


© 2024 MH Sub I, LLC dba Internet Brands