newage rotated inlet manifold, custom and new (UPDATED)
this is a regretful sale of my new rotated set-up for my bugeye.
this is an sti manifold, with a carl davey wedge welded and smoothed, all de lugged, and a custom bracket to hold a brand new FPR. custom made fuel block with -6 fittings. new fuel lines and fitted to lengh. new carl davey fuel rails with fittings. will come with a kit to rotate the alrernator so this is a full kit and ready to use, thats all it needs is to chose a colour you want to paint the manifold £550 delivered http://i157.photobucket.com/albums/t...ps7e9b07f5.jpg http://i157.photobucket.com/albums/t...pscb19b17e.jpg http://i157.photobucket.com/albums/t...psd99c0399.jpg http://i157.photobucket.com/albums/t...ps90cf94b8.jpg http://i157.photobucket.com/albums/t...ps024b6256.jpg http://i157.photobucket.com/albums/t...ps30690e9b.jpg |
more pictures added
|
Is the feed from the pump going into the block and also the returns from rails?
|
yes all the pipes run through the fuel block, and then distributed to their place
|
That doesnt seem like the greatest of an idea mate.
|
why the negative comment, you do realise all the pipes dont go into one camber in the block!!
the block is basically made out of 2x T-junctions but machines into one block whats wrong with that setup as ALL fueling stocklists sell the same product but a different look?? |
If its in 2 x T config, is it plumbed up correctly in PIC??
|
yes mate i had it made by an engineering company that deals with modified cars and doing custom work, the fuel block is right mate i know
|
I would have thought the block should be turned 180 degress..
.................................................. feed ---> l ===> rails .......................................Return to Reg<--- l <=== return from rails |
if your looking at a birds eye view it doesnt look like Y Y (2x Y junctions)
its been machined so there is short fuel line runs and every outlet is at the right side so it looks tidy, he has done it in a way so it works, look if you really need to know ill do a drawing how it looks inside? |
Im looking for something like this, hence the interest. Is the Carl Davy wedge for the newage T/B or will it take v5/v6?
|
i dont know, i bought the wedge and he welded up and machined the edges and tapped out to fit the the newage, i dont know if the v5/v6 is the same as V7
|
nice upgrade for someone ?
|
Bump
|
still here
|
All times are GMT +1. The time now is 07:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands