JDM Impreza STi Type RA V2 Breaking DCCD All Parts Available
 

White Pre Facelift GC8 Impreza STi Type RA for breaking. Car Starts & drives, Closed deck Block for big build !! This is the first of the RA's that subaru built, this was hand built in japan and came over from japan with blueprints.. Version 2 Type RA with 5 speed Dccd works fine all gears are spot on Closed deck motor starts first turn of the key Wheels are sold. This car was rolled onto its roof as a result of going sideways into a ditch, did not roll the whole way over just onto its roof...this car had only covered 91000km

pm me for more details

thanks

Chris

Real shame. Is that bug sti ra from Blackburn in the background?

nooo
 

no thats our Spec C track weapon :)

How much for engine gearbox and diff ?

£1000 for gearbox & Diff
£1200 for complete engine

Thanks

Standerd engine or has it been rebuilt?

totally standard only done 91kms

Pm a price on rear diff pls

I need the seal and brackets for the roof vent/flap if you've got them?

selling roof flap complete, with all plastics, clips, bolts etc for £230 delivered

Thanks

What diff is on the rear? is it rear shafts hubs, prop gbox and diff £1000

If it's got a single DIN stereo and a pocket, I'm interested in the Pocket and fascia etc.

Also interested in drivers A-Pillar trim.

Cheers

Mark

ah you messaged me regarding the 55 sti
I have a single din stereo pocket in this v2 RA along with door pillar trim as you require
thanks
chris

rollcage price please

How much for maf sensor? Posted to bristol

air flow sensor removed from V2 RA. £80 delivered to bristol
Thanks
chris

Roll cage sold bud sorry..

Any more come about ill post up here for you..

keep an eye out ;)

Thanks

chris

Price please inc shopping to Herts.

Cheers

Mark

I am converting my v1 to dccd bud so need the selector wheel, dccd ecu, clocks and as much wiring as it takes to rig the dccd ecu into my loom (probably as easy to take entire loom. What we talking please.

any news?

Hi Chrissy,

I'm still interested in the door trim. Also could oy uplease give me a price on the front drive shafts and CV joints?

Thanks

Mark

hi im looking for a camshaft sensor and a crankshaft sensor for a version 1 import the same as you have i believe the cam sensor has a wire on it going to a three pin plug and the crank sensor has a plug on it going to a three pin plug i will need the wire for the crank sensor as well please how much if you have these ones please