2003 STi EngineTuner 2.35 600bhp No Expenses Spared. Loss of Job forces sale.
8 Attachment(s)
It pains me to do this but my car must go due to loss of job.
Spec is as follows 554.2bhp/520lbs on Vpower (1.9bar) 600.6/570lbs on Vpower + 16 % meth (1.9bar) EJ22T Closed Deck Block Stroked to 2.35 79mm nitrided crank Mahle pistons with uprated pins I-beam rods ACL Race bearings Block seal kit including new block bolts Rear thrust machining Rebore and hone Kevlar cam belt RCM Group N Sump RCM oil pump Head stud kit 14 MM Water pump Tensioner kit Cosworth head gaskets Subaru gasket and seal kit Cusco Twin Plate clutch Full RCM Twisted turbo Up/Dwonpipe kit ceramic coated Garret GT35R Billet Ver 3 with clipped wheel Turbo Tial 44mm External waste gate GT Spec headers Full RCM Track attack catch can with blow by breathing Revolution 3inch exhaust system RCM Twisted Turbo water supply kit RCM Twisted Turbo Oil supply RCM Twisted Oil drain Kit RCM header relocation tank kit RCM 100mm Spun Aluminium Trumpet RCM Fuel Pressure regulator K&N Cone Filter RCM 15 Degree 100mm Silicone Hose (Black) APS DR725 Front Mount Intercooler (Red Pipework) 3 port boost solenoid Heads JDM Big port Heads with Head throat and seat work porting Kelford 264 Cams Cosworth Inconel +1mm valves Fueling ID2000 injectors Perrin Fuel Rails Bosch 44 Pump on Litchfield 1ltr Swirl pot Walbro 255ltr in tank lift Fuel filter Fuel Pressure Sensor Management Syvecs PNP ECU Toucan Touchscreen CAL Selection Mapped By Martyn Jeffery (Enginetuner) for both Vpower and Meth Antilag and Launch Control Enabled Wideband Lamda DEFI Sti Genome Gauges (Turbo, Oil Pressure, Oil Temperature) Fuel Pressure gauge Brakes AP 355 7040 Front Brake kit in Black Brembo rear colour matched setup with Tarox disks and pads. Braided Fuel Lines DOT6 racing fluid AST Coilovers Whiteline rear ARB 22mm Anti lift Kit Revolution Strut Brace Prodrive P1-WRC in satin black18 inch wheels ET46 Full Spec C interior incl Seats, Dash, Steering wheel and Carpet. Damd flat bottom Steering wheel. Zunsport Grills (Upper and Lower) RCM Cool Panel Guide For Radiator Chargespeed carbon scoop delete Detango'd Headlights Attachment 57723 Attachment 57724 Attachment 57725 Attachment 57726 Attachment 57727 Attachment 57728 Attachment 57729 Attachment 57730 £17k without bonnet vent and Damd wheel. Car will have standard Sti scoop and ver 8 wheel fitted for sale. |
If I had that kind of cash I would buy that in a shot, always liked that car and followed your build, such as shame it has to go so soon :(
Needs must tho, GLWTS not that you should need it :thumb: |
Gutted for you as its clear how much you love that car.
|
Amaaaaaazing spec mate GLWS I will have the full long engine if you decide to break it :thumb:
|
Too right no expense spared stunning spec
|
sorry to hear this mate,its an imacculate car with an amazing spec.at that price it wont be around for long.glwts.
|
We gonna have a deal this time fella :)
|
Thats a perfect car for you Fud.
|
Was thinking that myself....
|
Im getting no answer still lol ive got patients :)
|
Fud at work on nightshift so limited access, pm me if you want a dialogue as everyone else is pm'ing me and can pick emails up
|
Every time we speak you are working man is like kunta kinte lol.
|
Needs must mate one month left on contract. Still for sale
|
Great car ive spent so much on the spec c, But still fancy it, ill let some one else try and buy it first.
|
Amazing spec! And quite a sleeper too. Has subtle touches to show the informed its power. Bet its embarrased a few cars in its time.
GLWTS |
What a beaut - supercar performance for 15k. This needs absolutely nothing done to it and has obviously had nothing but the best afforded it.
No brainer, if I didn't have my own build, I would take your arm off for it! Just make sure it goes to a good loving home eh? :) And the very best of luck getting a new job sorted; sucks that you're in this position! |
stunning car and a man sized mod's list glwts
|
Sorry to hear about the job loss Steve.:(
Best of luck with the sale not that you will need it.:) |
A lot of car for the money GLWTS.
|
Thx guys
|
Hope u manage to find a way of keeping it Steve. You probably have close to ur asking price in the engine
|
Originally Posted by BIG FUD
(Post 10997932)
Great car ive spent so much on the spec c, But still fancy it, ill let some one else try and buy it first.
|
Originally Posted by stevep360
(Post 10997720)
Needs must mate one month left on contract. Still for sale
|
Originally Posted by stevie1982
(Post 10998596)
Sorry to hear this mate, what do you do for work may be some one in here may know of something so you can keep hold of it:thumb:
|
Very nice car
Tempting |
Originally Posted by stevep360
(Post 10998609)
IT contractor specialising in Cisco (CCIE accredited)
|
Originally Posted by Einstein RA
(Post 10999333)
Is that at the Morley site?:)
|
All PM's answered, and yes its a Billet Ver 3 clipped wheel GT35
|
You'll get another contract mate.
You could even work in London for a few months, I know it would be a pain, but £££ |
Whats happening this sold yet buddy ?
|
All times are GMT +1. The time now is 03:18 PM. |
© 2024 MH Sub I, LLC dba Internet Brands