|
Subaru Impreza STi version 2. 450bhp. Simtek, Apexi, rotated kit, Lensos,
All parts now removed
Pics on request if needed 450bhp STi Version 2. All prices plus p+p Spec as follows: Crystal headlights and sideligts SOLD Lightweight alloy facelift bonnet in 230 £100 3d grill 35 Smoked front indicators £15 17'' Lenso lightweight wheels with Toyo Proxes £400 Dark tints to rear windows £15 Mid spoiler £25 STi rear lights £SOLD Wings £SOLD Doors £20 each Front bumper cut for front mount £25 Rear bumper £15 Interior STi6 seats SOLD STi2 doorcards SOLD Black Apexi AVCR £SOLD Prodrive gear knob £SOLD Infinity door and shelf speakers with tweeters and crossovers £50 Blitz turbo timer £SOLD Suspention/ Brakes Sti red struts on front, KYB street specials on rear with Hks lowering springs £250 4pot calipers SOLD new discs and padgid pads £50 Solid rear drop links £40 STi strut brace £SOLD Engine spec Built aprox 5k miles ago by the previous owner Ian Mould with Heads sold, short block consisting of: Closed deck block Brand new subaru crank Eagle forged rods Full acl race bearings Mahl pistons Cosworth gaskets Cosworth belt with new cambelt kit Group N modded sump £1800 Mocal catch can £65 Polished reversed inlet manifold ( Could do with a buff over ) £SOLD 800cc Nismo flow matched injectors £180 Parallel fuel rails with braided engine bay lines with Sard Fpr £SOLD Rotated set up Front mount intercooler painted black with rotated pipework £150 ITG cone filter, 100mm inlet £65 Garrett T60-1 turbo with .63 a/r. Ball bearing, 500-550bhp £550 Ceramic coated Gt spec 3bolt headers £SOLD Rotated uppipe with External wastegate with screamer pipe £100 Rotated 3" decat down pipe leading to full 3" revolution slip joint exhaust £200 £1200 for the lot Management Simtek ecu with 2 maps, one for 95 octane, one for 99 Anti lag on swith by handbrake Launch control activated in ecu but not switched on Mapped by Simon Roe (jolly green monster) £550 |
yhpm
|
Can I get pics of the grill and Parallel fuel rails with braided engine bay lines
|
|
pedro you got an upgraded turbo intake hose i could get?
|
Do you know what type braided Lines they are goodridge etc, also would u split from the rest as i don't need the fpr or rails
|
Originally Posted by wrx fifer
(Post 10980347)
pedro you got an upgraded turbo intake hose i could get?
Originally Posted by P1power
(Post 10980597)
Do you know what type braided Lines they are goodridge etc, also would u split from the rest as i don't need the fpr or rails
|
What version is the reversed inlet and pics if possible ?!
|
reversed inlet sold
|
Hello
Is the below still available ? Rotated uppipe with External wastegate with screamer pipe £100 Rotated 3" decat down pipe leading to full 3" revolution slip joint exhaust £200 If so any pics as very interested. |
Rotated 3" decat down pipe leading to full 3" revolution slip joint exhaust £200
is still available |
List updated
Crystal headlights and sideligts SOLD Lightweight alloy facelift bonnet in 230 £SOLD 3d grill 35 Smoked front indicators £15 17'' Lenso lightweight wheels with Toyo Proxes £SOLD Dark tints to rear windows £15 Mid spoiler £25 STi rear lights £SOLD Wings £SOLD Doors £20 each Front bumper cut for front mount £25 Rear bumper £15 Interior STi6 seats SOLD STi2 doorcards SOLD Black Apexi AVCR £SOLD Prodrive gear knob £SOLD Infinity door and shelf speakers with tweeters and crossovers £50 Blitz turbo timer £SOLD Suspention/ Brakes Sti red struts on front, KYB street specials on rear with Hks lowering springs £PROV SOLD 4pot calipers SOLD new discs and padgid pads £50 Solid rear drop links £40 STi strut brace £SOLD Engine spec Built aprox 5k miles ago by the previous owner Ian Mould with Heads sold, short block consisting of: Closed deck block Brand new subaru crank Eagle forged rods Full acl race bearings Mahl pistons Cosworth gaskets Cosworth belt with new cambelt kit Group N modded sump £SOLD Mocal catch can £65 Polished reversed inlet manifold ( Could do with a buff over ) £SOLD 800cc Nismo flow matched injectors £SOLD Parallel fuel rails with braided engine bay lines with Sard Fpr £SOLD Rotated set up Front mount intercooler painted black with rotated pipework £150 ITG cone filter, 100mm inlet £SOLD Garrett T60-1 turbo with .63 a/r. Ball bearing, 500-550bhp £SOLD Ceramic coated Gt spec 3bolt headers £150 Rotated uppipe with External wastegate with screamer pipe £SOLD Rotated 3" decat down pipe leading to full 3" revolution slip joint exhaust £200 Management Simtek ecu with 2 maps, one for 95 octane, one for 99 Anti lag on swith by handbrake Launch control activated in ecu but not switched on Mapped by Simon Roe (jolly green monster) £450 |
What make is the down pipe ? Any pics and how loud is the exhaust and is it 3" all the way through and with resonators or baffles ? Reason I ask is was running a nut spec but neighbours hated me so now running a hks silent full system and it seems to be ok by them.
|
Nur spec sorry predictive text !!!
|
No pics at the minute. Downpipe is custom made because of the rotated set up. Resonator in center section.
Its 3'' all the way but is by no means loud. It is slip jointed together. Reason for this is the antilag would blow the exhaust gaskets apart it it had flange joints. Its a very good system, not cheap. |
Any dings / scrapes on the exhaust condition wise ? Very interested. Would I need a rotated uppipe for a rotated setup though ?
|
yes it has the usual speed bump scrapes as the car was lowered but its not burst or badly damaged, still works fine.
Yes youll need a rotated uppipe for a rotated set up, or at least a new flange then weld it yourself once trial fitted |
The tailpipe is it a round tip or slash cut ?
|
its a slash cut
|
Where abouts are you as I'll have the rear windows (these are the back doors ?)
|
Im in Ayr, Scotland.
Postage would be £10 for both |
Won't they get broken ?
|
Plenty bubnle wrap and cardboard and theyll be fine
|
How do you want paying
|
paypal is fine
|
Can you pm me the amount and addy please
|
What make are the solid rear drop link? Are they in good condition? A pic would be appreciated.
Do you have a pic of the exhaust manifold or do you know they are a good make an no fix up welding? What year is this car as I looking for a steering rack for from a 93-93 Impreza to go into a 93 S1 Legacy |
Droplinks and manifold sold.
I do have steering racks here, £20 delivered |
Sounds good, I need a rack from 93-96 with the universal joints and pipes to the pump if you've got any in good condition. It's going into a sprint car and I'm not sure if a STI rack has a quicker ratio than a WRX of this vintage, I know an RA rack would be best but they are hens teeth. I can send a photo of the rack I need if you want.
|
Yes got all that here
|
| All times are GMT +1. The time now is 05:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands