ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   Idle up and down (https://www.scoobynet.com/general-technical-10/958635-idle-up-and-down.html)

gooner 1 09 December 2012 04:16 PM

Idle up and down
 
I've got a leak from the headers gasket could this be the prob ??

gooner 1 09 December 2012 04:18 PM

It's fine when I first start it up from cold but as it gets warm it starts :-(

tubbytommy 09 December 2012 04:25 PM

idle control valve

Eprom 09 December 2012 05:01 PM

I think you may need to provide more information, what year/model may help

Shaks-STI 09 December 2012 05:07 PM

I have a similar problem, when its cold idles very well but as soon as the car gets up to the temp idle is messed, i have changed the idle control and hasnt resolved as well.

Mine is a V4 TypeR

gooner 1 09 December 2012 05:11 PM

It a classis 2.35
Ok had the car mapped the pitcher day all good on the way home cld hear a blowing from headers turns out its the header gasket started the car up today and the idle is up and down 1 to 1.1/2

Jolly Green Monster 09 December 2012 05:42 PM

the header leak will effect it Daren..

Also engine is starting to loosen up now that its run in and mapped so it might need an adjustment but first fix the header leak and take it easy until sorted.

Simon

Paul Scoob 09 December 2012 06:10 PM

iv got a simuilar problem wen mine starts up i need to keep it on a rev it just cuts out if u let it start anybudy any ideas i was told crankshaft sensor could be away

gooner 1 09 December 2012 06:34 PM

:thumb:

Originally Posted by Jolly Green Monster (Post 10900160)
the header leak will effect it Daren..

Also engine is starting to loosen up now that its run in and mapped so it might need an adjustment but first fix the header leak and take it easy until sorted.

Simon


Jolly Green Monster 09 December 2012 06:36 PM


Originally Posted by Paul Scoob (Post 10900190)
iv got a simuilar problem wen mine starts up i need to keep it on a rev it just cuts out if u let it start anybudy any ideas i was told crankshaft sensor could be away

Unlikely. What year?

gooner 1 12 December 2012 10:13 PM

So today checked all pipe work one loss on the inlet man went out for a drive and. It was ok for about 5/10 mins now on idle it drops that low it cuts out can smell petrol a lot :-( any thoughts

Steve777 12 December 2012 10:34 PM

Funny that, my idle has just started to climb. Up at 1500rpm for some reason. Was gonna check the ICV ? Classic running on SimTek

gooner 1 12 December 2012 10:52 PM

I'm on a simtek


All times are GMT +1. The time now is 12:18 AM.


© 2024 MH Sub I, LLC dba Internet Brands