Flip switches... Where's best to put them??
Hi I have bought 3 flip switches like ones in fighter jets as I'm having .... Anti lag, launch control and dual map put in.. Just wondering of anone else has done this?? Also where did you put the switches??
Thanks |
Up
|
Up
|
I've done this but only for my anti slag at the moment. Used one of the blanked off holes where the heated seat switch goes by the hand brake. Will fit my LC switch next to it when I get around to it.
|
Ahh yehh was thinking there abouts mate you got any pictures?
|
https://www.scoobynet.com/members-ga...r-a-clean.html
Try the above, only one pic but you get the idea. |
|
Looks good mate.. Yehh is launch control worth it?
|
I always wanted these switches, where did you get them ? and can you get different colour's ?
|
eBay mate.. Loads of colours
|
Worth having? Or the switch worth having? Tbh most standard lC systems are activated when first gear is engaged so switch not needed it that case. I'd rather have it on a switch personally.
|
PM Jura, I fitted one for him and I think he already had a couple:wonder:
|
http://i890.photobucket.com/albums/a...830_165156.jpg
they only require and 8mm hole to be drilled and push through from the back and are bolted in so you can put them anywhere you like. behind the dccd wheel or anywhere on the centre part with the cupholders in is ideal as there is plenty of room underneath for wiring. |
I've currently got 1 up in the for sale section in red and never been used if your interested.
|
Originally Posted by tubbytommy
(Post 10770247)
http://i890.photobucket.com/albums/a...830_165156.jpg
they only require and 8mm hole to be drilled and push through from the back and are bolted in so you can put them anywhere you like. behind the dccd wheel or anywhere on the centre part with the cupholders in is ideal as there is plenty of room underneath for wiring. |
Originally Posted by Dave-W-
(Post 10770346)
like them swithches tubbs look spot on:thumb:
found some on ebay but havent turned up yet. they plastic is red tinted perspex and has an led in it not solid red like the ones i have now |
It's tempting to get a couple just to brighten up the switch blanks :norty:
|
I have the led ones that light up red.. Tommy where you get the black controls faces from for center?
|
As Jon said,he done for us switch,which has been used for switching off the Water methanol kit pump
Here is picture how it looks http://thrll.com/img/uploads/updates...IMG_0902_2.jpg http://thrll.com/img/uploads/updates...G_0923_HDR.jpg Jura |
Originally Posted by Rbon91
(Post 10770451)
I have the led ones that light up red.. Tommy where you get the black controls faces from for center?
|
Ahh rite. You know where I can get them from in USA? Or know anyone selling any? Cheers
|
Demon tweaks do them but they are quite expensive from there.
|
Here is few of them
http://www.ebay.co.uk/itm/ws/eBayISA...ht_5398wt_1163 http://compare.ebay.co.uk/like/33068...var=sbar&cbt=y http://www.graystonengineering.com/e...cal%20main.htm Hope this help Jura |
Originally Posted by tubbytommy
(Post 10770370)
nice and cheap on ebay only about £3, im trying to get some ones that light up at night.
found some on ebay but havent turned up yet. they plastic is red tinted perspex and has an led in it not solid red like the ones i have now If so how are they wired up:confused: Me and wires don't get on :Whatever_ |
All times are GMT +1. The time now is 01:22 PM. |
© 2024 MH Sub I, LLC dba Internet Brands