ScoobyNet.com - Subaru Enthusiast Forum - new godspeed 4 pots ordered

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)

- ScoobyNet General (https://www.scoobynet.com/scoobynet-general-1/)

- - new godspeed 4 pots ordered (https://www.scoobynet.com/scoobynet-general-1/948060-new-godspeed-4-pots-ordered.html)

Yes going on my blobeye sport

Quote:

Originally Posted by Godspeed Brakes (Post 10773981)

Hi Simon
Yes we can do them , its £75 each plus any parts that might be needed , we remove the pad plates to bead blast the whole calipers so it fixes this problem
We could make new pistons if you wanted them , but the standard pistons are anodised aluminium so if these are all ok I would stay with them , if you change the pistons to stainless it would make your calipers heavier.
Cheers Ian

That sounds good. I have a a full set in a box that need doing, and possibly the fronts off my car too.

You talked about the tests that you carried out on the pattern calipeers that youve used in the £300 kit earlier:

Have you seen the copy Brembo Big Reds (identical to Big Blacks, but inverted with the crossover pipe and nipples swapped over) that are sold by a number of vendors?

Theyre Chinese in origin and sold in Europe branded/dristributed by Dansk and theyre sold here by Design 911, for £400 for the pair delivered.

Im tempted by these but I doubt that anyone has tested them in the way that youve described, so any opinions or experience that you have would be appreciated.

Simon

Well there on thanks to sheffield subaru service' and once again Ian at Godspeed' oe 2 pots were slightly seizing so i can tell a diff straight away... Once bedded in will report back and i will take some pics later... Rears next !!

http://img3.imageshack.us/img3/5736/...5140347203.jpg

Uploaded with ImageShack.us
http://img99.imageshack.us/img99/430...5345372203.jpg

Uploaded with ImageShack.us
still a work in progress, done plenty..but got plenty i want to do...next is an high level rear spoiler:D

Looks nice that but not sure about a turbo scoop on n/a car IMHO :)

Please don't cover it in stickers :D

Should of just bought these, would of saved a fortune...

http://www.ebay.co.uk/itm/110806116545?redirect=mobile

It's a pity that that they don't do any 2 pot rears to match! :cry:

4pots were from MY98-on

Quote:

Originally Posted by Twin Fields (Post 10876215)

It's a pity that that they don't do any 2 pot rears to match! :cry:

I don't know of any other companies making copy rear 2 pot calipers , but you can pick them up fairly cheaply second hand , as the rear calipers are alloy they don't seem to be as bad for seizing as the front steel calipers

Quote:

Originally Posted by Godspeed Brakes (Post 10876581)

Worth knowing. Cheers! :thumb: