ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   ScoobyNet General (https://www.scoobynet.com/scoobynet-general-1/)
-   -   Tuning a 97 WRX (https://www.scoobynet.com/scoobynet-general-1/942100-tuning-a-97-wrx.html)

crookedvulture 06 July 2012 08:31 PM

Tuning a 97 WRX
 
As per title I have a 1997 WRX that I belive cant be 'mapped/chipped' so to speak.I know very little about this kind of thing but wondered if I got an ecu from another year car would that work or do I need something to work along side my cars current ecu?

cjquicksilver 06 July 2012 08:41 PM

Your standard ecu isn't mappable without a ecu tek (like a chip) unfortunately you cant swap Ecus from a later mappable model as the loom plugs are different, how ever you can buy a aftermarket ecu, apexi fc, simtek, syveccs etc which will plug in to your loom and make the car mappable, but the aftermarket ecu can't just be plugged in and away you go, you have to have a map on it to run the car

Jimbob 06 July 2012 08:45 PM

Don`t ESL make a daughter board for these ecus now allowing the to be fully mappable??


Originally Posted by Enduring Solutions LTD
Live mapping system for pre 99 Subaru Imprezas.

Feature List (Not Exhaustive):

Low cost (GBP295/USD450)
Suitable for all turbocharged Imprezas
Only option for Legacy RSB/GTB
Only option for AT Forester
MAF/MAFless load switchable in software
User Switchable Maps (Full, not offsets)
Closed Loop Knock Control
Closed Loop Idle
Injector overrun cut off
Software fully windows integrated, modern, object oriented, multi-threaded, live updates.
Factory drive quality out of the box.
Comprehensive closed loop knock control.
3D boost mapping - no boost controller required.
Can be remapped to incorporate further modifications.
Full OEM Diagnostic control codes.
International dealer support network.
Standard hot and cold start compensations.
Closed loop narrowband lambda control (idle and light cruise).
No additional harness
All Sensors and actuators exposed, will work with any specification
Installation Service available
Motorsport features to follow: ALS, LC, Flat Shift


SAVE MONEY - GET MORE!

The OEM JECS ECU is the most capable ECU you can use with your Version 1 -4 Impreza!

Consider the amount Subaru will have spent developing and testing it specifically for that model range and compare that to the likely budget of an aftermarket manufacturer.

Find another ECU with useful real world features such as closed loop knock control so comprehensive that it can retard ignition, add fuel and modify boost.

How many after market ECUS feature full active diagnostics and 3D boost mapping?

The only major disadvantage of the OEM JECS ECU was its inability to be reflashed. Thats where the ESL Live daughterboard comes in. It allows the numbers in the OEM ECU to be changed to control fuelling, ignition, boost, sensor and actuator swaps (MAF, MAP, turbo, injector, etc). ESL Live will grow with any future modifications you have planned. It is the complete solution for any engine specification.

The best part - At £295+VAT and mapping it is very much cheaper than any of the aftermarket replacement ECUs, and a national distributor network means local support for the product. Don't be fooled into paying over the odds for a replacement ECU that is less capable than the one you already have in the car. This is a rare situation where you really can save money yet get more.

A national distribution network consisting of all the UK's top Subaru tuning experts is in place to ensure local support.

Contact us on: service@enduringsolutions.com

http://www.enduringsolutions.com/
http://www.jollygreenmonster.com/classic.html

scooby.steve555 06 July 2012 08:47 PM

Yeah i've had the ESL fitted to my98 WRX, works really well.
Fitted by Graham at group B motorsport

MattyB1983 06 July 2012 09:15 PM

Yep, ESL is the way.

Shaks-STI 07 July 2012 07:02 AM

Im running ESL on my car just waiting for twin maps and AL/LC too.

crookedvulture 07 July 2012 11:42 AM

Thanks guys,been having a look at this on tinternet looks good,the way to go I think :thumb:


All times are GMT +1. The time now is 03:00 PM.


© 2024 MH Sub I, LLC dba Internet Brands