ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   New age tmic fitment to classic (https://www.scoobynet.com/general-technical-10/940213-new-age-tmic-fitment-to-classic.html)

5cooby1 20 June 2012 09:04 PM

New age tmic fitment to classic
 
What scoop do I need to get more air in and what under tray is needed also?

Many thanks

mouseb 20 June 2012 09:14 PM

you need an sti scoop tmic and scoop under tray

5cooby1 20 June 2012 09:24 PM

Thanks is that from a newage sti?

mouseb 20 June 2012 10:15 PM

if you have a newage car then yea you wont like for like

5cooby1 20 June 2012 10:31 PM

Ok cheers so a classic sti under bonnet undertray is the right size for a newage sti mount thanks for answers sorry for questions lol

ade_sti 20 June 2012 10:45 PM

No - you need the under tray from the car that the intercooler was from. Newage Sti intercooler tray is what you need. A classic one is not big enough to seal around the intercooler and direct enough air onto the surface.

You will have to cut the top section off if it is from a blob eye as is huge compared to classic scoop under tray.

5cooby1 20 June 2012 11:04 PM

Thanks what scoop would you Recommend?

Rescue Dude 21 June 2012 09:04 AM


Originally Posted by 5cooby1 (Post 10674822)
Thanks what scoop would you Recommend?

I run a new age STi top mount with a Carl Davey undertray. I use the standard Classic scoop which works fine.

Rescue Dude 21 June 2012 09:32 AM

This is a good project thread.

https://www.scoobynet.com/projects-4...0-classic.html


All times are GMT +1. The time now is 02:07 AM.


© 2024 MH Sub I, LLC dba Internet Brands