Bomber!
Took the old girl out for a drive last Saturday and upon coming home I gave her the usual inspection. Found some oil mist on my inner wing that I identified as PAS fluid.
http://img.photobucket.com/albums/v2...5/42cb2e7e.jpg On investigating further I found that my HP PAS line was leaking a small amount of fluid through the core of the hose. I removed it before it failed, caused a fire or worse. I took it to my hydraulics shop for a second opinion. They were very helpful as always and put the failure down to heat, and the hose being used slightly outside its rated pressure. The shop made me up a brand new heavy duty hose there and then free of charge. http://img.photobucket.com/albums/v2...5/64225958.jpg I've also been cutting the car up again. Although I'll let the photos do the talking here. http://img.photobucket.com/albums/v2...5/71c28683.jpg http://img.photobucket.com/albums/v2...5/dca62371.jpg http://img.photobucket.com/albums/v2...5/74252937.jpg http://img.photobucket.com/albums/v2...5/a54b04f2.jpg http://img.photobucket.com/albums/v2...5/7182ca16.jpg More to come soon :) |
looks mad all the best..
|
Looking forward to seeing th finished article at the next meet mate :top:
|
Glad you found the route cause of the leak before any damage was caused to the Bomber!
Bonnet is loooking good, can't wait to stare at the final result at the next meet, always seem to spot something new whenever i see your car! |
your one crazy mofo Frayz but attention to detail is quality.....looking forward to the finished article.. :)
|
Cheers guys, getting there slow as ive only got an hour here and then to play with it at the mo.
Lol, Doc, why crazy? :D Couple more bits to do and she's ready for some paint. Mesh is just test fitted for now. http://img.photobucket.com/albums/v2...5/b4936318.jpg http://img.photobucket.com/albums/v2...5/0bc1c68a.jpg |
Looks mint fancy doing mine I'm that that brave lol
|
Get in touch mate, used to cutting holes in cars now lol
|
Great job so far Frayz, may I ask what do you use to bond that to the bonnet?
|
Black sikafkex mate.
|
Of course :wonder: :D
That hydraulic shop came up trumps for you, can you see any other heating issues arising? Spose not now with this mod! |
Nothing under there seems to get hot to any level anyway Andy. Everything is either wrapped, nomex covered or ceramic coated.
This is why I was do surprised the PAS line decided to fail. The vent I primarily want because I've always wanted a genuine works vent as well as taking advantage to dump heat out. Over the last 8 years I've concentrated on performance only. Now I'm adding my aesthetic touches to create a car that emulates the Tarmac spec S7/8 works cars. |
Originally Posted by frayz
(Post 10667122)
Nothing under there seems to get hot to any level anyway Andy. Everything is either wrapped, nomex covered or ceramic coated.
This is why I was do surprised the PAS line decided to fail. The vent I primarily want because I've always wanted a genuine works vent as well as taking advantage to dump heat out. Over the last 8 years I've concentrated on performance only. Now I'm adding my aesthetic touches to create a car that emulates the Tarmac spec S7/8 works cars. |
One or two maybe. Keep your eyes peeled.
;) |
Jess says the pegs look nice. :) Are they E marked for road use? :lol1: CF instead of blue would look better & save that all important weight.
|
:lol:
|
lucky u see that early like u said could cause a fire. looks good that vent i keep thinking about the seibon cw bonnet i think it called. Or may b some areo catches do u think u could fit if so how much cheers rob
|
Good spot with the PAS line Frayz, could have been dodgy :eek:
Vent is coming along nicely, loving the 'used' look :thumb: |
|
Good work, as always! :thumb:
|
Nice lookin job ............
|
Quick snap now it all done on the exterior.
http://img.photobucket.com/albums/v2...5/50ec5f52.jpg Bonnet removed and stripped for paint. http://img.photobucket.com/albums/v2...5/99f9f73f.jpg Now sporting the full on street racer look. Tempted to go for a Fast & Furious style drive. Haha. http://img.photobucket.com/albums/v2...5/958291f4.jpg |
Looks the dogs danglies Frayz, Love the vent :thumb:
|
Fray, can you remember who trimmed your steering wheel?
|
Yes but wouldnt use them again as I was never quite happy with the job.
For trim work now I would use Trim Deluxe |
Originally Posted by frayz
(Post 10669840)
Yes but wouldnt use them again as I was never quite happy with the job.
For trim work now I would use Trim Deluxe |
This scoob is the dogs doodies :notworthy:notworthy:notworthy
|
Top work Frayz :thumb:
|
Originally Posted by Arkwright
(Post 10668344)
Looks the dogs danglies Frayz, Love the vent :thumb:
Originally Posted by TomR555
(Post 10670043)
This scoob is the dogs doodies :notworthy:notworthy:notworthy
http://i284.photobucket.com/albums/l...GSDANGLIES.jpg |
Originally Posted by frayz
(Post 10669840)
Yes but wouldnt use them again as I was never quite happy with the job.
For trim work now I would use Trim Deluxe The Bomber is looking spot on Frayz !! Is there an ESC Tunnel Run this year? Would be able to get down to that for a blast if so :thumb: |
All times are GMT +1. The time now is 06:10 PM. |
© 2024 MH Sub I, LLC dba Internet Brands