| j4meswrx |
14 May 2012 03:36 PM |
v5/v6 motec m48 +wiring harness
hi i have a motec m48 ecu with v5/v6 wiring harness and switchable map thumbwheel, anti lag and launch control has been ran mafless also have been enabled previously mapped by bob rawle ecu will be availible from 23rd may as new ecu fitted on 22nd. looking for £450.00 plus postage
taken off website
Engine Tuning Features
- DOS-based ECU Manager tuning software
- Individual cylinder trims for both fuel delivery and ignition timing
- Suits modern engines, including those with coil per cylinder ignition
- 3D Fuel and ignition tables for engine mapping
- Table axis selectable from a range of channels
- Fully configurable axis points on fuel and ignition tables
- Full sequential crank and cam trigger system to suit almost all OEM sensors
- Free access to wideband Lambda and data logging for initial tuning. Available for the first 6 hours engine running time
Additional Distinct Features
- Capable of modern control functions, such as:
- Traction control
- Overrun boost enhancement (anti-lag)
- Gear change ignition cut (flat shifts)
- Boost control
- Nitrous injection
- Dual stage injection (Hi/Lo injection)
- Fully configurable sensor inputs including custom calibrations
- Including fuel secondary load table
- Multiple fuel and ignition compensation tables
- Possibility to use spare injector outputs for a fixed range of auxiliary output functions
- Transmitting data via RS232 bus – fully configurable
- Wideband Lambda measurement capability
- Integrated advanced diagnostics, including injector & crank trigger diagnostics
Data Acquisition
- Internal data logging (512 kB) with download via RS232
- State of the art i2 Standard data analysis software
Upgradable with optional functionality to make additional features available when you want them, activated through a simple password system.
http://i73.photobucket.com/albums/i2...6/40c2b1a0.jpg |
