Sigma alarm problems..
Hi all, basically the alarm was working fine up until recently. What happens is when I go to unlock with the keyfob, it unlocks and disables the alarm, then locks the doors straight away.. so basically I either have to quickly open the door when it unlocks before it locks them, or if I'm not quick enough unlock it manually with the key.
Any ideas whats causing this to happen? :confused: It's a classic UK turbo. Alarm was fitted by subaru when it was first registered. |
could be faulty door motor check they both close on the buttons on doors both sides
Ian |
Yep all work fine. Can't understand why it's locking the doors as soon as they've unlocked? Could it be shorting out somewhere?
|
Originally Posted by RICK...
(Post 10591615)
Yep all work fine. Can't understand why it's locking the doors as soon as they've unlocked? Could it be shorting out somewhere?
|
Ah, ok... Another fun job to add to the list! Will get the door card off and have a look.
Cheers guys. |
Anyone know where I can get a replacement? Tried loads of places now and no one seems to have one. Only other thing I can think is to try dealer.
|
eBay mate there it cheap type in door motor you will see them 2 wires about £3
|
Hi guys, changed the WHOLE thing and it's still doing it. Unlock, then lock straight away. Any ideas what it could be??
|
Sounds like the cdl switch in drivers door is not being
Triggered by the slave motor from the alarm Undo the clamp for the alarm slave motor sit in the car and arm the alarm the motor should move and stay in the same place untill alarm is disarmed If that works fine Sit in car and move the door lock rod by hand until it locks car then unlock car Once you have done this if the car locks and unlocks fine and the alarm works ok you need to adjust the alarm cdl motor untill it does what you done by hand to the car lock rod |
Originally Posted by AJF
(Post 10627273)
Sounds like the cdl switch in drivers door is not being
Triggered by the slave motor from the alarm Undo the clamp for the alarm slave motor sit in the car and arm the alarm the motor should move and stay in the same place untill alarm is disarmed If that works fine Sit in car and move the door lock rod by hand until it locks car then unlock car Once you have done this if the car locks and unlocks fine and the alarm works ok you need to adjust the alarm cdl motor untill it does what you done by hand to the car lock rod Ian |
Just got my car back as its been in bodyshop for a few weeks. The alarm is now even worse, still got the lock bouncing issue and now the alarm is not arming/disarming properly. Which means I have to press the button about 50 times before it disarms.
Had enough of this stupid thing now, starting to drain me! |
IMO get a replacement, have a toad ai606 fitted it will never let you down mate,
|
Yeah will be mate, just depressing me now as I've now spent £1,500 and ive only had the car 3 months! lol. new alarm and removal of old one is going to set me back nearly £300 by the looks of it.
|
Cheaper up here mate ;-)
|
All times are GMT +1. The time now is 01:14 AM. |
© 2024 MH Sub I, LLC dba Internet Brands