ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   Rear Arch Rust Were did you get yours done and wat were the results like? (https://www.scoobynet.com/general-technical-10/931784-rear-arch-rust-were-did-you-get-yours-done-and-wat-were-the-results-like.html)

Joe will 09 April 2012 07:06 PM

Rear Arch Rust Were did you get yours done and wat were the results like?
 
hi all need to get my archs done willing to pay out good money if they are welded and resprayed.

dont want them rubbed back and resprayed as i know it will just come back rather pay once.

any help please need to get these done.

craigo 09 April 2012 07:08 PM

out of interest, what colour is your car?

Joe will 09 April 2012 07:29 PM

rb5 so gray mate

craigo 09 April 2012 07:32 PM

are you needing both arches doing and have you had quotes yet ?

addi monster 09 April 2012 07:36 PM

i got mine done at webbs autos in denaby rotherham, the result was spot on, very very pleased,.

winston69 09 April 2012 07:43 PM

cost?

cjquicksilver 09 April 2012 07:44 PM

im going to need mine doing wats a rough guide price for both?

craigo 09 April 2012 07:53 PM

you might get a deal for both doing..... £400 - £500 for 1 side repaired i was paying on my last scoob

Joe will 09 April 2012 08:47 PM


Originally Posted by craigo (Post 10570452)
are you needing both arches doing and have you had quotes yet ?

ye needing both done, not had any quotes yet, did you have:
your rear quaters replced,
cut out the rot and welded,
or buffed back and sprayed?

craigo 09 April 2012 08:52 PM


Originally Posted by Joe will (Post 10570642)
ye needing both done, not had any quotes yet, did you have:
your rear quaters replced,
cut out the rot and welded,
or buffed back and sprayed?

rot cut out fresh metal welded back in....

Joe will 09 April 2012 09:11 PM

you got a before and after pic, and a contact number for the body shop?

scott181 09 April 2012 09:26 PM

I need both sides done on my car went to a place not far from me and thay wanted 950 Think that's to much really mite be Wong tho

carl heath 09 April 2012 09:37 PM

We charge about £350 to £450 a side depending on how bad the inners are,were in birmingham/solihull way if anyone needs some advice,carl.

scott181 09 April 2012 09:46 PM

On my car it's about 3 inches both sides

Joe will 09 April 2012 09:48 PM

same. anyone else had them done?

Joe will 09 April 2012 09:51 PM


Originally Posted by carl heath (Post 10570770)
We charge about £350 to £450 a side depending on how bad the inners are,were in birmingham/solihull way if anyone needs some advice,carl.

do u normaly cut and weld? have you got any before and after pics very interested.

carl heath 09 April 2012 10:16 PM

I can chop whole quarters off and put a new one on if you wish mate,but sounds like you only need a run of the mill section cut out and a piece re-welded in,then filled primed and painted.this is what i do and am good at it too,i will try to look for some pics on our digital camera at work as just rebuilt a mini cooper and had lots of work in that,looks the bollocks now.or pm me your number and ill send you some pics via text,( dont want to come across as if im advertising the company i work for) pm if you want folks.


All times are GMT +1. The time now is 09:42 PM.


© 2024 MH Sub I, LLC dba Internet Brands