fitting 2006 hawk sti sweeping dials in to a 2006 blob wrx
 

ok so my dials come tomorrow courtesy of blob eye, im wanting to get as ready as i can do tonight ready for tomorrow, could people help,

i have located the yellow wire with green chase which i believe is b28, which i need to cut to stop the radio blowing,

i have located the orange wire witht he white chase which i believe is c9, which stops the buzzing constantly

i need your help with what colour the abs wire is on my 2005 blob wrx, i believe the location is b3? but cant be sure, plus as i cant figure out how the wires relate to a location on the loom, i need to know which wire it is i need to cut for the abs to install my relay to switch the polarity

please help, i have searched every thread on here and nasioc and i cant get anywhere what colour the abs wire is (located on plug b, the big centre plug)

anyone else had experience putting 06 sti sweeping startup clocks in to an 05 blob wrx please speak up or issues that happen that i need to sort out

thanks

jeff

interested to see this as im looking to put some of these in my sti.

http://forums.nasioc.com/forums/show...ti+cluster+wrx

32 pages of gen, but you may find something in there.

You can help do mine Tommy!

already read the full thread with no joy

I knew I saw it elsewhere......

http://www.scoobymods.com/showthread...hlight=cluster

Here is this pdf,i've uploaded on my For sale thread

https://www.scoobynet.com/showpost.p...93&postcount=8


Jura

if im looking at my cars wiring correctly, i dont have a wire going to b28, which saves me having to cut one, but wire c9 is to be cut to stop the buzzer, in my case this is a yellow wire with a blue chase, confused? (not a orange wire with a white chase as the guides suggest?)

Sorry but I never understand why anyone would want to do this :wonder: They are expensive to buy and aren't designed for the other car (the WRX doesn't have DCCD) I liked the novelty of the 'sweep' for the first few weeks but now I don't even notice it! :wonder:

shame they don't just make a sweep device to fit

not sure on hawk to blob but hawk sti to hawk wrx is cut 1 wire and file down the lug on one set of the connectors,turn around job done.

got pics somewhere.will try and post them up later

cheers guys,

i have no b28 as i dont have cruise control, so thats cool
c9 is not cut and i have fitted spades to allow for reversal if i later wish and i have pre wited in a switchable jumper to ground the handbrake polarity should it arise as an issue

fingers crossed now tomorrow they just plug in and work :)

thanks for your helpful info

how did you go on with this mate? im trying hawkeye sti dials into early blob wrx but finding the colour coding doesnt match up from any diagrams or peoples pics.Still got handbrake light and abs light on on top of thr buzzing! cheers for any help

:wonder: Me neither. The dials go up and down for a couple of seconds. Wow! :D

hi I was just wondering did you find a way to fix the abs light and hand brake light to stay off when you fitted hawk eye clocks in you blob as I trying to fir a set in my blob as well thanks steve

Have a read of this : http://www.sentinelit.com.au/misc/20...uster_swap.pdf

..............m