I thought these were a direct swap over the MY00 mid level spoiler :(

Tried fit mine last night, took the original one off two bolts removed and one plastic clip that holds it to the boot.

The PD one has 3 sets of holes for the allen bolts to fix to, two on either side I can get to using the original holes, however seems I need to fix one where the plastic peg went into the boot.

Trouble is I can't see the bottom of the plastic peg hole in the bootlid as its double skinned on the inside :(

How'd I fix this bolt in? Do I need to drill through the double skin on the inside?
Also does the black rubber bung that the peg slots in come out without breaking? I can't get it to budge.

Thanks for any help...
John

John
I have had the WR sport spoiler fitted recently to my RB5 by a garage. On looking I noticed that they had drilled a hole in the double skin from inside the boot for the mounting bolts, also there was a broken black plastic peg lying in the boot when I got the car back.
Sorry I cant be more specific, but I dont have the car with me.
Beastie :D

Thanks for the info, guess I'll have to drill through the inner skin, no probs doing that though I guess. Wouldn't be so keen if I had to drill through the boot surface itself.

I guess the rubber bits are available as a spare item if they break coming out and I needed to fit the original spoiler back on.

Cheers

sounds like you'll have it on for saturday john;)
nice one

chris