Originally Posted by Ed@Japspeed
(Post 11146491)
Its a great product which is why we've sold so many to forum members.... and we know of it taking alot more power then that :p
Thanks for your feedback :) BTW - ever considered doing pipework to allow reverse inlet? |
Originally Posted by MrNoisy
(Post 11147391)
Yep, my mate's blob runs over 500 with one and I'm sure it's probably on a few cars running in excess of 6 or 700 too - you should post some results mate :)
We will get there one day.. or better still post up your results... if everyone who used a kit posted the graph we would have shed loads of evidence. :)
Originally Posted by MrNoisy
(Post 11147391)
BTW - ever considered doing pipework to allow reverse inlet?
|
Giles, I've just read your thread.... a great write up mate. Very useful read to someone with similiar model cars to us. You make me jealous
|
Originally Posted by chet123
(Post 11152034)
Giles, I've just read your thread.... a great write up mate. Very useful read to someone with similiar model cars to us. You make me jealous
You should pop to one our meets sometime.
Originally Posted by Ed@Japspeed
Originally Posted by MrNoisy
BTW - ever considered doing pipework to allow reverse inlet?
|
Originally Posted by MrNoisy
(Post 11152782)
Cheers buddy. Remind me - where are you based again? Is it near Slough?
You should pop to one our meets sometime. Would be very interested in that mate; if the mounting bar allowed you to flip the intercooler so the pipework's at the top, and with a reverse inlet should be a very short run and a decent improvement :thumb: I will see what there take on it is... |
Hi Guys NEW STOCK JUST IN... OFFER RE-OPENED We have just received New stock of our New age intercooler kits for the impreza! We want to give you guys the chance to grab one at a super great scoobynet price so we are going to provide you an irresistible group buy! So lets get as many names as possible to make the price cheaper for you guys! We are offering these to you as forum members for £199.00: Our New age intercooler kits retail for £299 on the Japspeed site, and we are knocking a massive £100 of the new age for you on scoobynet! It doesn't get much better than that! There are various well known track cars that use our intercooler kits but lets not forget the japspeed subaru once had one of these full kits when it had the boxxer engine! it now only has the intercooler itself due to the custom pipe work needed now it’s running the 1jz, but the intercooler still remains and has been fitted to the car now for 2 years and its still working perfect! and looks just as good as it did the first day it was fitted! :thumb: http://www.drifted.com/wp-content/up...09-622x414.jpg Below are the Kits features. Subaru Impreza New Age Front Mount Intercooler http://japspeed.co.uk/uploads/images...40-0004(2).jpg Features: * Bar and plate intercooler 25x9x3.5 Inch. * 2.5 Inch inlet and 2.5 Inch outlet. * High flowing hand made end tanks. * Fully TIG welded. * Polished aluminium pipework. * All necessary clamps and silicone hoses. * Maximum cooling capacity while allowing for minimal pressure drops. * 1050cfm @ 0.5 psi drop. * Capable of handling up to 600BHP. * NOW INCLUDES FREE 3 INCH AIR FILTER TO COMPLETE KIT!! To get your hands on these all you need to do is call me on 08444 489 080 with your card details ready. Or if you prefer you can send a paypal payment to sales@japspeed.co.uk with a note attached to the payment providing me with your contact details, shipping address, telephone number and email address and a note of the product you wish to order. I look forward to sending some of these out to you guys soon. Paul Question now is... who wants one? :thumb: |
Originally Posted by Ed@Japspeed
(Post 11151015)
We dont get time... we too busy getting prepping our cars for the next event and getting answering enquires and most of the time getting orders processed for you guys and our other customers.
We will get there one day.. or better still post up your results... if everyone who used a kit posted the graph we would have shed loads of evidence. :) https://www.scoobynet.com/picture.ph...ictureid=24354 |
Nice one!
That's a nice smooth map as well!! :) |
Have a great weekend guys! we will be back Monday to process your orders!
Remember you can send a paypal payment to sales@japspeed.co.uk with a note attached providing us with your full name shipping address contact number email address and a note of the items you wish to order and we will process this at the first opportunity! :) Regards Paul |
BACK TO THE TOP!!!!
This is probably the most popular intercooler kit on scoobynet! At the great price to forum members its no surprise..... plus the fantastic feedback we have always received on this kit means its the first choice for those of you looking for a FMIC setup! With the item in stock and ready to be dispatched for next day delivery.... what you waiting for??? Treat yourself and get in touch with our sales team on 08444 489 080 Or send your paypal payment to sales@japspeed.co.uk as per details in the first post on the thread. I look forward to sending more of these out to you! :) regards Paul |
Middle of the week has arrived..... I suppose its a good thing though as it means the weekend will be upon us soon and we can get back to working on our cars!
If you are looking to place an order in time for the weekend then get in touch today or tomorrow by calling our sales team on 08444 489 080 or alternatively you can send a paypal payment providing us with your: Full name Shipping address Contact number Email address & a note reminding us of the items you wish to order. We can then process your order at the first opportunity and have our dispatch team send the item for next day delivery! If you have any questions then post them up, send a PM or call us on 08444 489 080 and our friendly staff will be happy to assist you. Regards Paul |
HI Guys
Today is the last day to order if you wish to get your item in time for the weekend! Hurry though as our dispatch team will need enough time to get your item picked & packed before the courier collects! Call on 08444 489 080 and out sales team will assist you! We also thought we would remind you that you can purchase these anytime of the day by sending across your paypal payment to sales@japspeed.co.uk with a note providing us with your: Full Name Shipping Address Contact number Email address ( This is important as this is how you will receive your invoice ) And a reminder of the product/products that you wish to order. Once we receive your payment we will then process your order for next working day delivery. If you have any questions then please do not hesitate to contact one of the sales team. Regards Paul |
Hi Guys NEW STOCK JUST IN... OFFER RE-OPENED We have just received New stock of our New age intercooler kits for the impreza! We want to give you guys the chance to grab one at a super great scoobynet price so we are going to provide you an irresistible group buy! So lets get as many names as possible to make the price cheaper for you guys! We are offering these to you as forum members for £199.00: Our New age intercooler kits retail for £299 on the Japspeed site, and we are knocking a massive £100 of the new age for you on scoobynet! It doesn't get much better than that! There are various well known track cars that use our intercooler kits but lets not forget the japspeed subaru once had one of these full kits when it had the boxxer engine! it now only has the intercooler itself due to the custom pipe work needed now it’s running the 1jz, but the intercooler still remains and has been fitted to the car now for 2 years and its still working perfect! and looks just as good as it did the first day it was fitted! :thumb: http://www.drifted.com/wp-content/up...09-622x414.jpg Below are the Kits features. Subaru Impreza New Age Front Mount Intercooler http://japspeed.co.uk/uploads/images...40-0004(2).jpg Features: * Bar and plate intercooler 25x9x3.5 Inch. * 2.5 Inch inlet and 2.5 Inch outlet. * High flowing hand made end tanks. * Fully TIG welded. * Polished aluminium pipework. * All necessary clamps and silicone hoses. * Maximum cooling capacity while allowing for minimal pressure drops. * 1050cfm @ 0.5 psi drop. * Capable of handling up to 600BHP. * NOW INCLUDES FREE 3 INCH AIR FILTER TO COMPLETE KIT!! To get your hands on these all you need to do is call me on 08444 489 080 with your card details ready. Or if you prefer you can send a paypal payment to sales@japspeed.co.uk with a note attached to the payment providing me with your contact details, shipping address, telephone number and email address and a note of the product you wish to order. I look forward to sending some of these out to you guys soon. Paul Question now is... who wants one? :thumb: |
Got mine fitted yesterday car now off the road for remap
|
got any pics of it installed on a hawkeye? looking to see where the pipework sits
cheers |
Thee should be some in our subaru build thread somewhere i would expect.
However its been too long since it was updated and we also run a different setup now since fitting the 2JZ lump. back in the day though when we first built it we used to have a cosworth lump in it. We've sold loads on the forum so im sure a member may be kind enough to throw up a picture of theirs fitted for you?? anyone? |
Hi Guys NEW STOCK JUST IN... OFFER RE-OPENED We have just received New stock of our New age intercooler kits for the impreza! We want to give you guys the chance to grab one at a super great scoobynet price so we are going to provide you an irresistible group buy! So lets get as many names as possible to make the price cheaper for you guys! We are offering these to you as forum members for £199.00: Our New age intercooler kits retail for £299 on the Japspeed site, and we are knocking a massive £100 of the new age for you on scoobynet! It doesn't get much better than that! There are various well known track cars that use our intercooler kits but lets not forget the japspeed subaru once had one of these full kits when it had the boxxer engine! it now only has the intercooler itself due to the custom pipe work needed now it’s running the 1jz, but the intercooler still remains and has been fitted to the car now for 2 years and its still working perfect! and looks just as good as it did the first day it was fitted! :thumb: http://www.drifted.com/wp-content/up...09-622x414.jpg Below are the Kits features. Subaru Impreza New Age Front Mount Intercooler http://japspeed.co.uk/uploads/images...40-0004(2).jpg Features: * Bar and plate intercooler 25x9x3.5 Inch. * 2.5 Inch inlet and 2.5 Inch outlet. * High flowing hand made end tanks. * Fully TIG welded. * Polished aluminium pipework. * All necessary clamps and silicone hoses. * Maximum cooling capacity while allowing for minimal pressure drops. * 1050cfm @ 0.5 psi drop. * Capable of handling up to 600BHP. * NOW INCLUDES FREE 3 INCH AIR FILTER TO COMPLETE KIT!! To get your hands on these all you need to do is call me on 08444 489 080 with your card details ready. Or if you prefer you can send a paypal payment to sales@japspeed.co.uk with a note attached to the payment providing me with your contact details, shipping address, telephone number and email address and a note of the product you wish to order. I look forward to sending some of these out to you guys soon. Paul Question now is... who wants one? :thumb: |
Have you got a pipe kit for my blob in stock WITHOUT the cooler, asked a while back and was told it could be sorted when back in stock, asked a few times now since stock arrived but not had a replie, need to replace my hdi piping as its rather poor IMO.
|
Has anyone got a photo of where the overflow bottle sits, I am trying to work out how much room there is
|
Dont gave a pic as cars getting arbs fitted but mine is in the same place the old one came out of
|
I thought it wouldnt fit and a smaller one is needed?
|
The one you get with the kit is narrow ans smaller and round
|
Double post
|
Originally Posted by CarBen Fibre Creations
(Post 11178654)
Has anyone got a photo of where the overflow bottle sits, I am trying to work out how much room there is
JohnD |
We have run Japspeed FMIC on previous build(2.1L and MDX321T) and has been spotless at this power
Here are graphs: V-power graph http://s3-eu-west-1.amazonaws.com/st...es/Dyno_2.jpeg V-power and 20% meth http://s3-eu-west-1.amazonaws.com/st...and_Torque.jpg And how it looks fitted: http://s3-eu-west-1.amazonaws.com/st...s/IMG_0526.JPG http://s3-eu-west-1.amazonaws.com/st...s/IMG_0527.JPG http://s3-eu-west-1.amazonaws.com/st...s/IMG_0524.JPG Jura |
Originally Posted by Infected by sti
(Post 11178353)
Have you got a pipe kit for my blob in stock WITHOUT the cooler, asked a while back and was told it could be sorted when back in stock, asked a few times now since stock arrived but not had a replie, need to replace my hdi piping as its rather poor IMO.
regards Paul |
Originally Posted by jura11
(Post 11179335)
We have run Japspeed FMIC on previous build(2.1L and MDX321T) and has been spotless at this power
Here are graphs: V-power graph http://s3-eu-west-1.amazonaws.com/st...es/Dyno_2.jpeg V-power and 20% meth http://s3-eu-west-1.amazonaws.com/st...and_Torque.jpg And how it looks fitted: http://s3-eu-west-1.amazonaws.com/st...s/IMG_0526.JPG http://s3-eu-west-1.amazonaws.com/st...s/IMG_0527.JPG http://s3-eu-west-1.amazonaws.com/st...s/IMG_0524.JPG Jura Thanks for the pictures and graph... :thumb: Anyone else want to add there results with some pictures too the thread. |
Originally Posted by CarBen Fibre Creations
(Post 11178654)
Has anyone got a photo of where the overflow bottle sits, I am trying to work out how much room there is
Give us a ring if you have any issues. :thumb: |
Originally Posted by Ed@Japspeed
(Post 11179454)
You got this sorted Ben? the kit comes with a replacement bottle.
Give us a ring if you have any issues. :thumb: |
Originally Posted by CarBen Fibre Creations
(Post 11179550)
I havent unboxed the kit yet mate :o should have really dont that before I started posting up. I'll check it all this weekend and let you know if I have any problems :thumb:
I'm sure everything will be perfect with it :) |
All times are GMT +1. The time now is 03:05 AM. |
© 2024 MH Sub I, LLC dba Internet Brands