PM'd you.
|
Originally Posted by Ed@Japspeed
(Post 11125757)
Yes let me know your email and i can send them over to you :)
Gavin.bing@nationalexpress.com |
Not got anything yet!
truss@hotmail.co.uk |
Just resent them again :)
|
Intercooler arrived next day cheers mate
|
PM'd
|
Am I too late to get one of these for a Newage?
If I am not too late is it still £199 delivered with air filter? thanks. |
HI,
We still have a small stock of these available whilst we await more stock. To order you can call our sales team on 08444 489 080 or alternatively you can send payment by paypal to sales@japspeed.co.uk as per instruction in the first post. Regards Paul |
Hi Paul,
I'd like to send you money for one of these...now, before I spend all my money at the weekend. If I send you the money via PayPal what else do I need to do? Regards, Chew |
I've still not recieved instructions, id like to see wheter this is DIY'abe or to book garage's time.
|
Hi Truss,
I hav sent the instructions to you 3 times and non of my emails have come back as undelivered?? Can i ask you to offer me an alternative address or perhaps have a look in your spam folder in case my emails have jumped in there? |
Originally Posted by ch3w3y
(Post 11134815)
Hi Paul,
I'd like to send you money for one of these...now, before I spend all my money at the weekend. If I send you the money via PayPal what else do I need to do? Regards, Chew |
Payment sent and details attached.
Please let me know if there is any more information you need. Regards, Chew |
Recieved mine today looks amazing :) and a bargain! Just need fitting guide sending to my email! Thanks again really pleased
|
No idea, certainly not in my junk.
Can you try bentrusselle@googlemail.com Thanks, eager to get an order in.
Originally Posted by Ed@Japspeed
(Post 11138559)
Hi Truss,
I hav sent the instructions to you 3 times and non of my emails have come back as undelivered?? Can i ask you to offer me an alternative address or perhaps have a look in your spam folder in case my emails have jumped in there? |
HI Truss,
I have resent instructions to the new email address provided. Please confirm you have received this now?? regards Paul |
Have you got a pipe kit available yet? Been waiting patiently :)
|
Ive got it Paul thank you.
Does the kit still come with the induction pipe, and is it still 199 delivered? Can I pay with PayPal? |
Originally Posted by Truss
(Post 11139238)
Ive got it Paul thank you.
Does the kit still come with the induction pipe, and is it still 199 delivered? Can I pay with PayPal? |
HI Guys!
We have received a new delivery of these and are offering them to you at the original £199.00 delivered price including free 3 Inch air filter!! To order call our sales team on 08444 489 080 with your card details at the ready and our friendly team will process your order. Or alternatively you can send a paypal payment to sales@japspeed.co.uk with a note attached providing me with your: Full name Shipping address Contact number email address and a note telling me which of our products you wish to order. regards Paul |
Hi Paul can you send me some fitting instructions to my email please brad2002uk@hotmail.com
Want to get mine fitted but wouldn't know where to start without the guide! Cheers |
Sent them over to you! :)
Lots of forum members have purchased these and im sure would be more then happy to advise you on the fitting. |
Originally Posted by Ed@Japspeed
(Post 11144733)
Sent them over to you! :)
Lots of forum members have purchased these and im sure would be more then happy to advise you on the fitting. Yeah I seen member mr noisy at japshow and he was very helpfull and showed me how he'd cut the bumper etc to fit his Japspeed intercooler Will get some pics up on here once I've done it :) |
Good man, I have some photos of the install here:
http://www.cardomain.com/ride/397045...dan-4d/page-3/ Might be a little bit helpful. The trouble with the ones Paul sends out (no offence Paul) is that they're not necessarily matched to the product and there are some things which made me scratch my head a lot! All I'll say is - when it comes to cutting your bumper, take your time and be prepared to cut small and offer up and repeat if you want a good snug fit rather than a big hacked up hole! :) Good luck :) |
Originally Posted by MrNoisy
(Post 11145217)
Good man, I have some photos of the install here:
http://www.cardomain.com/ride/397045...dan-4d/page-3/ Might be a little bit helpful. The trouble with the ones Paul sends out (no offence Paul) is that they're not necessarily matched to the product and there are some things which made me scratch my head a lot! All I'll say is - when it comes to cutting your bumper, take your time and be prepared to cut small and offer up and repeat if you want a good snug fit rather than a big hacked up hole! :) Good luck :) Just had a look at your write up on that link very nice by the way, subaru looks amazing! Congarts on the power aswell around about what im hoping for eventually :) Noticed on one of the pictures the intercooler doesn't look like it quite sits central in the bumper grill! Is this how they all fit? And are there ways to get it back central? Didn't notice it on yours at japshow possible because of the mesh grill you had infront of the intercooler Apologies if this is wrong place to be posting this... |
Originally Posted by MrNoisy
(Post 11145217)
Good man, I have some photos of the install here:
http://www.cardomain.com/ride/397045...dan-4d/page-3/ Might be a little bit helpful. The trouble with the ones Paul sends out (no offence Paul) is that they're not necessarily matched to the product and there are some things which made me scratch my head a lot! All I'll say is - when it comes to cutting your bumper, take your time and be prepared to cut small and offer up and repeat if you want a good snug fit rather than a big hacked up hole! :) Good luck :) No offence taken...:thumb: The instructions are there as a guide and 90% of the time will guide you through what to do in order to fit the FMIC kit. Its always handy getting some feedback from someone who has fitted one to there own car as its a different pair of eyes and a different method/way of doing things. There are plenty of forum members with these fitted and pleased with their results like yourself. :thumb: |
Sent plenty of these out to you guys again today!
Dont worry if you too are after one as we have now received our full delivery of these kits back into stock! And as always we are offering these to you for £199.00 including a free 3 inch air filter! Remember you can purchase these anytime of the day by sending across your paypal payment. So whilst your having a brew with your feet up tonight... you can send your paypal payment over to sales@japspeed.co.uk with a note providing us with your: Full Name Shipping Address Contact number Email address ( This is important as this is how you will receive your invoice ) And a reminder of the product/products that you wish to order. Once we receive your payment we will then process your order for next working day delivery. If you have any questions then please do not hesitate to contact one of the sales team. Regards Paul |
Originally Posted by Jdm-brad
(Post 11145270)
Thanks alot mate Just had a look at your write up on that link very nice by the way, subaru looks amazing! Congarts on the power aswell around about what im hoping for eventually :) Noticed on one of the pictures the intercooler doesn't look like it quite sits central in the bumper grill! Is this how they all fit? And are there ways to get it back central? Didn't notice it on yours at japshow possible because of the mesh grill you had infront of the intercooler Apologies if this is wrong place to be posting this... However, having consulted some friends who had fitted one, I discovered people tend to use a single bolt on the bumper bar with a nut or two as a spacer to make it sit in the middle. Re-fitted like this and then it went central. Must be a decent product - made 439bhp with my SC42 :D Hth :thumb: |
Originally Posted by MrNoisy
(Post 11145962)
Must be a decent product - made 439bhp with my SC42 :D
Hth :thumb: Thanks for your feedback :) |
Originally Posted by MrNoisy
(Post 11145962)
It's mainly because initially I did fit it off centre as the inter cooler core has two bolt holes, and I thought I needed to use both so drilled a few holes in the bumper bar to do that (its weird because the bumper bar had a square in it and the kit had a small metal strip with two bolt holes so I assumed it would use these but was wrong!!
However, having consulted some friends who had fitted one, I discovered people tend to use a single bolt on the bumper bar with a nut or two as a spacer to make it sit in the middle. Re-fitted like this and then it went central. Must be a decent product - made 439bhp with my SC42 :D Hth :thumb: I'm sure I will get there in the end! Will be in touch to pick your brain if I get stuck :thumb: |
All times are GMT +1. The time now is 09:36 PM. |
© 2024 MH Sub I, LLC dba Internet Brands