**Classic Clearout - Will Keep Adding Bits**
Just having a bit of a clearout people so thought i would put this lot on here before i get carried away with ebay once again. I would obviously like to get the prices stated but i'm open to offers to.
Payments to be made via paypal and fees paid All prices are without postage and packing and i'm not the type who charges people silly amounts to make up for the cost of the item. Those of you who know me please remember to BUMP my thread if its heading into that black hole of Scoobynet ads :D :thumb: V1/2/3 Pre-Facelift Climate Control Panel - £10 - Now £5 http://i419.photobucket.com/albums/p...e/DSC00028.jpg V3 Idle Control Valve - £15 - Now £10 http://i419.photobucket.com/albums/p...e/DSC00346.jpg HKS Dump Valve - V.Early Model - Fully functional and sounds good - £40 - Now £30 http://i419.photobucket.com/albums/p...e/DSC00349.jpg New Catch Can - £25 < Price dropped - Now £20 http://i419.photobucket.com/albums/p...e/DSC00357.jpg Boost pack but without MAP sensor - this includes 3 port solenoid, atmospheric pressure sensor and ignitor pack for independent coils - £40 Now £30 http://i419.photobucket.com/albums/p...DSC00360-1.jpg Automatic window winders for an RA - for those who want a little luxury :D - £40 - Now £30 http://i419.photobucket.com/albums/p...DSC00361-1.jpg 4 Plug early ecu modified with COBB chip, with a modified MAF and Magnat Marrelli MAP Sensor - When this was installed car was boosting to 1.4 bar and felt much quicker during the 12 months of owning (unfortunately did not dyno) the only additional thing required is a decat downpipe, this setup runs on standard 380cc Grey injectors which are standard in every phase 1 classic. £200 - Now £150 http://i419.photobucket.com/albums/p...e/DSC00362.jpg Resonator to MAF pipe no splits - £5 The blue pipe in the pic below is now sold http://i419.photobucket.com/albums/p...e/DSC00364.jpg I also have the following if interested let me know>>> - 4.111 diff - £80 - Now £60 - Shafts for the above £40 the pair - Now £30 - Full STI interior from V2 4 door inc door cards (driver seat has a hole in bolster)- £100 Colour Code 406 - Silver - Driver Side rear door -£20 - Rear Bumper (including hockey sticks) - £20 - Driver Side light - £10 - 4 x standard shocks no knocks - £50 - Now £40 - Folding mirrors - £40 - Now £30 - Rear Spoiler - £50 - Provisionally sold (Still Awaiting payment) - Rear Lights - £30 for the pair - Now £20 - Early classic bonnet vents - £10 http://i419.photobucket.com/albums/p...e/d8902129.jpg I also have a set of 4 pot subaru calipers with pads << these should be binned i think - some rust on these bad boys but after inspection under the seals all seems ok underneath, these could be made fully functional with a good clean up (i'm assuming they may not be functional but cannot say without testing hence price - £70 inc P&P NOW £60 inc P&P http://i419.photobucket.com/albums/p...e/DSC00370.jpg http://i419.photobucket.com/albums/p...e/0cb0a964.jpg http://i419.photobucket.com/albums/p...e/2b8e4f49.jpg http://i419.photobucket.com/albums/p...e/76144eac.jpg http://i419.photobucket.com/albums/p...e/DSC00369.jpg Carbon STI strutbrace with a little damage, nothing major - £40 http://i419.photobucket.com/albums/p...e/4f1af4a0.jpg the damage http://i419.photobucket.com/albums/p...e/0fc0499b.jpg If theres anything else you may need ask on the thread and i will get back to you on here. http://i419.photobucket.com/albums/p...e/DSC00019.jpg http://i419.photobucket.com/albums/p...e/DSC00020.jpg |
Fuel distribution block?
|
Originally Posted by erchie84
(Post 10403458)
Fuel distribution block?
|
front passenger side door for sale?
|
Originally Posted by Ballyscoob
(Post 10403480)
front passenger side door for sale?
|
Thread updated with>>>I also have a set of 4 pot subaru calipers with a set of pads (unknown brand as not checked) - some rust on these bad boys - can get pics for anyone interested - £70 inc P&P
|
Save me the front drivers door bud.
Wanna metal one for on track just in case I have an off |
Originally Posted by need4speeduk
(Post 10403899)
Save me the front drivers door bud.
Wanna metal one for on track just in case I have an off |
Could you put up some pics of the four pots? Is it just surface rust on them or have they started to corrode badly? Had a look at another set I was thinking of buying from a 2000 car and the metal was pretty rotten around the piston seals and the caliper mounts, just want to make sure they're in good nick and serviceable. If they'll clean up with a wire brush and paint I could be interested :)
|
Originally Posted by Guest
(Post 10404074)
Could you put up some pics of the four pots? Is it just surface rust on them or have they started to corrode badly? Had a look at another set I was thinking of buying from a 2000 car and the metal was pretty rotten around the piston seals and the caliper mounts, just want to make sure they're in good nick and serviceable. If they'll clean up with a wire brush and paint I could be interested :)
|
ill take the short shifter bro
|
m8 is the v2 sti intercooler bigger than the standard slanty on a my 96 wagon? could be interested if its a worthwhile upgrade from the standard slanty. and is it a straight fit do you know ? cheers bud.
|
Originally Posted by subarur1
(Post 10404209)
ill take the short shifter bro
|
Originally Posted by yabbadoo4
(Post 10404210)
m8 is the v2 sti intercooler bigger than the standard slanty on a my 96 wagon? could be interested if its a worthwhile upgrade from the standard slanty. and is it a straight fit do you know ? cheers bud.
I do have an e-mail from a guy in the states who in fairness did message me last night and he's waiting on some more pics with one of the hoses which was missing....will update thread with more pics of cooler and hoses as a complete batch. :thumb: |
what makes the catch can
also interested in the front calipers m8 piccys plese |
Originally Posted by SLAB
(Post 10404319)
what makes the catch can
also interested in the front calipers m8 piccys plese But its a quality item but not baffled has a drain off thumb screw at the bottom though. Hope that helps. Regards to more pics i'm just about to add the links to the thread now mate. :thumb: |
More pictures uploaded above for>>
- intercooler with all the hoses required as requested by some of you. - Subaru 4 pot brake calipers |
Bump for an honest chap - refreshing to see
|
Another free bump, cheers for the pictures of the calipers! I'll have a think ;)
|
Originally Posted by jinkus
(Post 10404377)
Bump for an honest chap - refreshing to see
Happy New Year :beer: Scoobynetters :thumb: |
Originally Posted by Guest
(Post 10404386)
Another free bump, cheers for the pictures of the calipers! I'll have a think ;)
|
More items added with pics>>
- Carbon fiber strut brace - 2 x side bonnet vents Price dropped on Catch can |
bump
|
Intercooler Sold
All PM's replied to, if interested in anything please ask, remember you could always tempt me with an 'Or Nearest Offer' |
bttt
|
Can't strestch to £40 but PM me your best price for the carbon strut brace posted to HA5 area mate if you want rid and your up for a deal!!
Cheers :thumb: |
Any front splitter available?
|
Originally Posted by wrxjdmsti
(Post 10407581)
Any front splitter available?
Originally Posted by carlito
(Post 10407548)
Can't strestch to £40 but PM me your best price for the carbon strut brace posted to HA5 area mate if you want rid and your up for a deal!!
Cheers :thumb: |
bttt for a top guy :)
|
top again lol
|
All times are GMT +1. The time now is 02:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands