Hyperflow FMIC
Bought this intercooler about a month back, but, by wierd twist of circumstance, I have ended up with a brand new kit at the same time! This has meant I have been able to put all the bits together to make a very near complete kit.
It is an Hyperflow descreet kit to suit bug, blob and hawk eye imprezas. as sold by various places online. It is extrememly good quality kit. The core is black and has very few bent fins, in excellent condition for a used core. The pipework is anodised blue, and although it has a few scratchs it is again in great condition. https://i38.photobucket.com/albums/e...2/IMG_0439.jpg https://i38.photobucket.com/albums/e...2/IMG_0441.jpg The kit comes with: Overflow bottle in black. Short ram induction cone and maf housing (cone has been cleaned and re-oiled with the correct cleaner, but is still quite dirty.) Maf housing is brand new and un-used. 10 x blue Smaco silicon joiners. O.E. bov adaptor in anodised blue. Alloy oil filler cap relocation tube. (with cap) https://i38.photobucket.com/albums/e...2/IMG_0442.jpg Lightweight bumper support bar in black. Breather hose / fuel line / t-piece / zip ties / mounting bracket. New sealed jubille clip set. Full instructions. https://i38.photobucket.com/albums/e...2/IMG_0443.jpg Couple of bits worth mentioning, the pipe that u turns out of the intercooler on the nearside has been cut in the past, possibly to ease fitting, still works and fits perfectly, just adds one silicon join to the sysytem. Also the pipe that runs through the gap on the offside wing has had the mounting bracket cut, this is not essential for fitting as the pipe holds firm anyway. https://i38.photobucket.com/albums/e...2/IMG_0445.jpg https://i38.photobucket.com/albums/e...2/IMG_0446.jpg All you would need to complete the kits would be a few nuts and bolts. :) Collection from Stoke on Trent, item can be packed and couriered at buyers expense. £800 ono Oh and also, unbranded indution cone (dual type) This will fit with the K+N typhoon if you want a bigger cone. £20 Delivered. https://i38.photobucket.com/albums/e...2/IMG_0451.jpg |
Would the FMIC not be compatible with any cold air wing induction kit?
|
Yes it is comapitble with some, I am using the hyperflow CAIK with mine. The problem with the k+n is that it uses the rear of the two holes through the inner wing, that is the same as the FMIC uses in this case. It would depend on which FMIC kit you are using.
|
Thats the problem im facing as my aps caik uses both holes in the wing.
|
This isn`t the best of pictures but it`ll give you the jist, if you can source a Hyperflow CAIK, it runs directly from the maf out of the front hole in the wing.
http://img823.imageshack.us/img823/3043/03122011438.jpg Uploaded with ImageShack.us |
Funds sent for K&N CAIK.
Cheers Ben :thumb: |
Monday bump. :)
|
BUMP
Cheers of the K&N, got it yesterday! :thumb: |
Post crimbo bump.
|
Bump for a top bloke, shocked this is still available.
|
Is oil cooler available??
|
Lol, no oil cooler is fitted, intercooler is only available because I ended up with 2!
Cheers for the bump. :) |
New year bump
|
would only luv this for my bug , but wont have funds until until end of jan . pm if it suits you .
|
macmac, you have PM. :)
|
Ok, slight plan change, could do with getting this gone now so it`s on e-bay:
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=180798293742 £500 will take this home. |
bumpo
|
I pressed the "buy it now button" :D
|
Sold to barry, off on it`s travels soon. :)
|
:thumb:
|
All times are GMT +1. The time now is 11:33 AM. |
© 2024 MH Sub I, LLC dba Internet Brands