Aluminum Rads
 

Found that my rad is leaking down one of the plastic sides so i decided to upgrade to an aluminum. I bought this........

http://i1133.photobucket.com/albums/...c/IMG_0280.jpg




http://i1133.photobucket.com/albums/...c/IMG_0281.jpg

Just wondering peoples thoughts regarding aluminum rads.

Cheers all

had a 52mm one on mine till it started to leak.so i fitted a standered one and there is no difference at all in engine temp.so the only difference i could see is that the ally one was heavier and i burnt my bleeding hands on it every time i popped the bonnet.i'd have a standered one over an ally one anyday.

The reason i went for an alu rad is that the standard rads looks cheap. I changed the rad in my last car to an alu one and i never had any problems....well my friend owns the car now and he's never had any problems (7years down the line)

I find that if somethings breaks or needs to be replaced, due to ware and tear, i tend to replace that part with an uprated item.

Standard one is fine at over 700bhp.

Just thought aluminum rads were more reliable than the standard items

im a fan of alloy rads. recently got a mishimoto item for my car and v pleased with it.

Did you go for the OEM replacement?

Sorry misread your reply. I prefer aluminum rads too :thumb:

Fitted same one to my classic last week.Be warned if your running a front mount the fan shroud takes a good bit of trimming and even a little bit of the fan blades:lol1:
Adds a bit of bling too:thumb:

Ahhhh forgot about the spacing. Oh well, i'll tackle that hurdle when i come to fit my frount mount

standard rads may cool ok but the plastic tanks will crack over time. I prefer my alloy one, looks better too