2002 Newage JDM STI Complete Engine with only 58k
 

2002 Newage STI JDM Complete Engine with only 58k, backed up by previous MOT's and service history. runs faultless.

The JDM engine is much stronger than the UK engines and benifit from a 8'000+ rpm rev limit, capable of much more power with the stronger internals and big port valves for larger power applications.

The engine is currently in the car and can been, heard and felt running, however it will be removed soon.

This is a complete engine with Big port AVCS heads, and a recent Timing belt and fluid change. Again this is backed up with the service documentation. I can supply with the Inlet manifold, throttle body and fuel rails for straight swap.

Ideal replacement for a blown motor, no need to purchase expensive gasket kit & tming belts (circ £450). Simply just install this complete engine.

Im open to sensible offers around £1600 for the long engine, however as im breaking the complete car I can add the required parts to meet your needs.

Thanks,
Rob
0752 20 20 500

http://i801.photobucket.com/albums/y...1-27120127.jpg

http://i801.photobucket.com/albums/y...1-27120203.jpg

http://i801.photobucket.com/albums/y...1-18145831.jpg



Added 04/12/12
Loads of paper work inc Japan & UK Servicing to back up the mileage.
http://i801.photobucket.com/albums/y...2-04190213.jpg


Japan Servicing, last recorded service in japan at 41620km (25'000 miles), also plenty other entries in the handbook further on, but I cant make them out lol
http://i801.photobucket.com/albums/y...2-04190114.jpg


Jan 08 61'000 km & Miles
http://i801.photobucket.com/albums/y...2-04185042.jpg


Feb 09 66'646 km & Miles
http://i801.photobucket.com/albums/y...2-04185026.jpg


Feb 10 71'957 km & Miles
http://i801.photobucket.com/albums/y...2-04185013.jpg


Jan 11 76'814 km & Miles
http://i801.photobucket.com/albums/y...2-04184956.jpg


Current Miles now 78'000 km & Miles which works out at around 58'000 miles only.
http://i801.photobucket.com/albums/y...1-27120823.jpg

Big port heads ??

Yes.

I believe the V7 JDM's are the same as the RA, S202, and Spec C.

Rob

rob is the gear surround the sti metal one and will it fit a blobeye

PM'D

Yes, and yes it will mate.
Replied bud ;)

Anyone interested in this excellent motor?

Bttt (jesus what time is it ;( )

Engine still here guys, can be heard, seen, and driven until its removed soon! I will attempt to get some video clips of it soon in operation.

Offers around £1600 for the long engine including the big port AVCS heads.

I have all the paper work to back up the mileage, and recent Cam belt and fluid changes.

Rob

Still here chaps. The car will be broken next week onwards as the Gearbox is provisionally sold, so last chance to see the engine in operation guys.

Rob

Bttt - Offers ;)

will this engine be a straight swap for a 2002 sti uk engine?

Yes mate, would be a nice upgrade too ;)

oh right cool cause mine goles for mapping next week and if it goes bang i know where to come lol

Its rare to hear of a car going wrong upon mapping, and mappers generally leave you some safe margin if done correctly (det cams etc) so you ought to be fine. However if you tell the mapper to push your motor to the limit then dont be surprised if it does go bang at a later date. I suspect this engine will be snapped up before xmas to be honest as its cheap enough and im prepared to listen to offers ;) Regards, Rob

Pics of engine bay added.

I will get some video footage of it tomorrow in action ;).

Rob

Up;)

Video Footage planned for this afternoon.

New price £1500 ono

Im guessing the STi type UK hasnt got AVCS heads where as this one does?? :\

Hiya mate,

Both the "newage" MY01> (Bugeye) STI uk and jdm motors both have AVCS heads, but the jdm has Big ported heads for better power delivery and can handle much more power better, and also has a stronger engine (semi forged) with a strengthend crank. Should be good for over 400bhp at ease, probably more like 450bhp :D

Rob

My step brother used my Blue 2002 Bug Sti and the engine has lost compression on one cylinder but is not using oil so im just thinking on replacing the lump. I will keep an eye on the thread. shud have money together soon. Good value for money. ;)

Your welcome to leave a deposit mate and I will hold it for you. It will be out early next week. Also if you prefer we can come to some arrangement to make it cheaper for you in the long run, such as leave the Inlet, throttle and fuel rails etc etc all in place.

From experience a pallet delivery would be around £50 which is insured up to £3'000.

BUMB ;)

Regards,
Rob

Can supply and fit if required at cost.

BTTT

More pics added to back up the mileage ;)

Found some more pics ;)

http://i801.photobucket.com/albums/y...2-04185243.jpg

http://i801.photobucket.com/albums/y...2-04185452.jpg

Video footage of the car/engine running. Will be upload when home later tonight or tomorrow all being well.

Hi

I sent you an email ;)

Aurelien
FRANCE

Emailed you back :thumb:

Regards,
Rob