VF22 ROLLER BEARING TURBO QUESTION
Hi there fellow scooby owners i have purchased myself as above a vf22 ihi turbo is a straight entry i have a top entry i was wondering if there was some kind of adaptor i could buy or order to be made so i could mount this turbo i have a mannifold with a front entry but the wireing is different from my 96 wrx manifold is off a 98 can anyone with so;e knowledge of this put me on the right track
thanks Ha5ti3 |
Some people convert front entry turbos to top entry by using a 90 degree silicone hose. I went down the hard route of changing inlet manifolds though and it's not quite as simple as just swapping the wiring because the throttle position sensor has a different plug on it.
|
vf22
Thanks for the quick reply Where could i buy one of these silicon pipes whats the right name or dimentions i would need any pictures of this done im strugling find much info on this
Originally Posted by Paulo P
(Post 10342302)
Some people convert front entry turbos to top entry by using a 90 degree silicone hose. I went down the hard route of changing inlet manifolds though and it's not quite as simple as just swapping the wiring because the throttle position sensor has a different plug on it.
|
right you can get the 90° pipe from ebay then you need and dont laugh at me a tin of sweetcorn the tins the right size to conect the 2
|
Thanks alot sonic al get on it post bk let you know how i get on what do i type in to get this 90degree bend incase i get wrong one lol bit of a noob
Originally Posted by sonicvr6
(Post 10342350)
right you can get the 90° pipe from ebay then you need and dont laugh at me a tin of sweetcorn the tins the right size to conect the 2
|
Why did you pick a vf22? Its big, laggy and fragile....
Tony:) |
Originally Posted by TonyBurns
(Post 10342419)
Why did you pick a vf22? Its big, laggy and fragile....
Tony:) |
All times are GMT +1. The time now is 06:03 AM. |
© 2024 MH Sub I, LLC dba Internet Brands