ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   pre face lift indicators fitting (https://www.scoobynet.com/general-technical-10/913879-pre-face-lift-indicators-fitting.html)

camcap 19 November 2011 05:31 PM

pre face lift indicators fitting
 
as above will be fitting clear ones to a 1998 classic tomorrow any ideas how the old ones come off ??

camcap 19 November 2011 05:35 PM

forgot to add its front and side ones

Spanair 19 November 2011 05:43 PM

The side indicators have one clip behind, just sorta push the clip in and pull out. The front ones I forgot even though I done em twice in the last 2 months :( lol, embarassing but it should be a simple job of removing the covers and go from there.. sorry about that.

camcap 19 November 2011 06:33 PM


Originally Posted by Spanair (Post 10339694)
The side indicators have one clip behind, just sorta push the clip in and pull out. The front ones I forgot even though I done em twice in the last 2 months :( lol, embarassing but it should be a simple job of removing the covers and go from there.. sorry about that.

no worries thanks for the help :thumb:

andy-m 19 November 2011 08:06 PM

i think its one of the bolts holding the front fog light on that also holds the front of the indicator. you undo that and the back end of the indicator just has a bit sticking out which sits behind the bumper recess for it.
the side ones, I just push forward in their hole and the back comes out, you then pull it back and the front comes out

camcap 19 November 2011 10:57 PM


Originally Posted by andy-m (Post 10339949)
i think its one of the bolts holding the front fog light on that also holds the front of the indicator. you undo that and the back end of the indicator just has a bit sticking out which sits behind the bumper recess for it.
the side ones, I just push forward in their hole and the back comes out, you then pull it back and the front comes out

Thanks mate

Jimbob 20 November 2011 02:51 AM

Here is the bolt your looking for.
http://i159.photobucket.com/albums/t...BYDOO/here.jpg

You may need to remove the fog covers if you have any.
As said from above the repeater is a pull back and unclip.

camcap 20 November 2011 09:26 AM


Originally Posted by Jimbob (Post 10340455)
Here is the bolt your looking for.
http://i159.photobucket.com/albums/t...BYDOO/here.jpg

You may need to remove the fog covers if you have any.
As said from above the repeater is a pull back and unclip.

Nice one thanks for the pic


All times are GMT +1. The time now is 08:28 PM.


© 2024 MH Sub I, LLC dba Internet Brands