Best 4 wheel alignment settings for modded MY08 sti
 

Can someone guide me in the right direction to what settings are best suited to the following mods I have done my 08sti?

I am getting the 4 Wheel alignment done locally on a Hunter alignment machine

The standard settings for the hunter machine are for a standard STI 07+ (but they will set any alignment settings for the car that I take along with me)

Front Whiteline sway bar 24mm (on softest setting)

Rear Whiteline sway bar 22mm incl mount supports(on middle setting)

Whiteline rear positive traction bushes

Whiteline steering bushes

Eibach lowering springs

Front upper and lower braces

I have read the geo settings for prodrive lowering springs are these different settings?

Also does a MY11 Sti's have revised spec c settings alignment?

And ultimately does anyone have the geo settings for the R205 sti?

Can someone just tell me if my08 is the same geo settings as a my11 sti?

Hello

We use Hunter Alignment equipement in our workshops which should have all the settings you will need....

call or email our workshop manager Glen Copeland and he will go into the system and let you know....
;-))
T: 0191 461 9200
E: workshop@revolution247.com

Hope that helps
Keith
Revolution

Cheers for the reply

All whiteline gear bought from revolution but got quoted £120 for alignment so had it checked on hunter machine, the rear camber was 1*59' LH and 1*35' RH.

Front RH camber bolt maxed at 56' so set RH set to match!

Have a look on the Whiteline website for recommended alignment settings.