ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Car Care (https://www.scoobynet.com/car-care-380/)
-   -   Poorboys nattys blue paste over blackfire all finish paint protection??? (https://www.scoobynet.com/car-care-380/908815-poorboys-nattys-blue-paste-over-blackfire-all-finish-paint-protection.html)

scoobyraj 09 October 2011 11:04 PM

Poorboys nattys blue paste over blackfire all finish paint protection???
 
Some advice would be appreciated.
I've got a metallic black hawkeye. Having read the polished bliss guides it seems the way forward is menzerna 203s followed by blackfire all finish protection. The next step they recommend if you have the monies is blackfire midnight sun paste. Sounds great but the last step is £55 a tub! The alternative they suggest is the poorboys range.
I was wondering if you could mix, how well the products would work and how good the finish would be??
I was thinking 203s, blackfire all finish protection then poorboys nattys blue paste as a cheaper method??
Any thoughts or advice??
My aim is to get several months protection. I've heard car covers are pretty bad for paintwork and the best preparation for winter is a decent layer(s) of protection/wax.
All comments appreciated.
Thanks!

s70rjw 10 October 2011 09:29 PM

For longevity, Collinite 476 is the best value wax/ sealant.
I've used Natty's Blue previously and its nowhere near as longlasting as Collinite.

scoobyraj 11 October 2011 02:28 PM

thanks for the reply. could that be used after the blackfire protection as the plast layer??
does it matter if your changing products and layering?? compatible?

scoobyraj 11 October 2011 06:31 PM

just ordered some collinite!

s70rjw 11 October 2011 10:41 PM


Originally Posted by scoobyraj (Post 10278566)
just ordered some collinite!

Perfect choice, particularly over winter. Bob

scoobyraj 12 October 2011 02:48 PM

thanks for the advice, appreciated.

Stevesbluewrx 15 October 2011 10:59 PM

Not sure the combo will work with the Blackfire wax then sealant? Will go hologram looking etc otherwise.


Steve

scoobyraj 16 October 2011 03:57 PM

Decided on the 203s then the collinite on top (couple of layers!!). That should see me well past winter and then maybe I'll have a re-think about the blackfire. You're right, I dont think blackfire then collinite will work......polishedbliss said something similar....to do with the polymers of blackfire....they make it very difficult for any other compound or product to be used on top.


All times are GMT +1. The time now is 01:00 AM.


© 2024 MH Sub I, LLC dba Internet Brands