My Impreza STI Blob Project
Howdy,
Registered on here recently and thought I would post up my on going project. My Scoob is my toy and I only use it in the summer for going to club meets at Knockhill etc. So its an ongoing modifying project that started this year and doesnt seem to have an end My original plan was to fit a WRC kit until I discovered the cheap kits where cheap for a reason. To get a good kit would cost serious money. So that idea was ditched pretty quickly. Some of my Plans 1. Remove and sell front bumper - COMPLETE 2. Remove and sell rear spoiler - COMPLETE 3. Remove, refurbish, paint gloss black and add a red pinstripe to all 4 alloys from TWS, Glasgow - COMPLETE 4. Send calipers to Ben and Ian at Godspeed Brakes for a complete refurb. Painting black with red Brembo logo . Also renewing all bolts, pins, bleed nipples, bleed nipple covers, seals and plates - COMPLETE 5. Renew rear discs and pads with Brembo drilled discs and pads - COMPLETE 6. Purchase new carbon centre caps for all4 alloys - COMPLETE 7. New black wheel studs - COMPLETE 8. De-tango and paint black both headlights - COMPLETE 9. New Carbon rear spoiler - COMPLETE 10. Remap with Launch Control from Alistair at Trackhound - 11. 20mm spacers added to all four wheels - COMPLETE 12. New floor mats - COMPLETE 13. K&N Panel Filter - COMPLETE 14. Walbro Fuel Pump - COMPLETE 15. Smoked side repeaters - COMPLETE 16. Complete service. New oils etc. - COMPLETE 17. New WRC Front Bumper fitted - COMPLETE 18. New tyres fitted - COMPLETE 19. New Tein Springs fitted all round and shocks refurbed- COMPLETE 20. Engine clean - COMPLETE 21. New WRC style carbon bonnet - COMPLETE Compaines I have used http://www.scoobyparts.com - Great source of parts at good prices. And always very helpfull. Highly recommended http://www.importcarparts.co.uk - Also really good and very quick delivery http://www.godspeedbrakes.co.uk - Highly recommended for brake refurbs. The made an awesome job of my calipers as you will see. Carbon Bonnet - John at www.demonmotorsport.com - great quality bonnet and worth spending that bit extra. Also a great fit and an awesome looking bonnet.:) Ebay - Not a fan of cheap ebay buys but good for the odd things that you cannot get anywere else. Like the carbon spoiler I bought. TWS Glasgow www.thewheelspecialist.co.uk - Not bad I wouldnt recommend using them as I had hassle with the quality of my wheels. Got it sorted in the end but not worth the hassle Some before pics of the Impreza http://i751.photobucket.com/albums/x...9/DSC02371.jpg http://i751.photobucket.com/albums/x...9/DSC02361.jpg http://i751.photobucket.com/albums/x...9/DSC02354.jpg http://i751.photobucket.com/albums/x...9/DSC02349.jpg |
Start with the easy and cheap things first.
ENGINE CLEAN Before (embarrassing how bad it was) http://i751.photobucket.com/albums/x...9/DSC02968.jpg http://i751.photobucket.com/albums/x...9/DSC02969.jpg After (not bad) http://i751.photobucket.com/albums/x...9/DSC03020.jpg http://i751.photobucket.com/albums/x...9/DSC03018.jpg |
REMOVAL OF PARTS FOR SELLING AND REFURBING
(3inch Cobra straight pipe was just too damn loud and had to go. A couple of warnings from the police helped make that decision) http://i751.photobucket.com/albums/x...9/DSC03641.jpg http://i751.photobucket.com/albums/x...9/DSC03651.jpg http://i751.photobucket.com/albums/x...9/DSC03645.jpg http://i751.photobucket.com/albums/x...9/DSC03644.jpg http://i751.photobucket.com/albums/x...9/DSC03689.jpg http://i751.photobucket.com/albums/x...9/IMG_5847.jpg http://i751.photobucket.com/albums/x...9/IMG_5846.jpg A video of the exhaust before it was removed. Sounds good at the flyby at 4mins http://www.youtube.com/watch?v=Ju1OrhXlqSc |
HEADLIGHT DE-TANGO AND PAINT BLACK
Before http://i751.photobucket.com/albums/x...9/DSC03649.jpg http://i751.photobucket.com/albums/x...9/DSC03730.jpg After (heated in the oven for 15mins to heat the seal. Dismantle, remove orange lense, paint and reassemble http://i751.photobucket.com/albums/x...9/DSC03729.jpg http://i751.photobucket.com/albums/x...9/DSC03728.jpg http://i751.photobucket.com/albums/x...9/DSC03731.jpg |
WRC BUMPER PURCHASED AND PAINTED
Spent a while looking at different companies at different WRC bumpers. but finally decided on this one. http://i751.photobucket.com/albums/x...icture2-11.png I did a bit of work to make it slightly different http://i751.photobucket.com/albums/x...9/IMG_3531.jpg http://i751.photobucket.com/albums/x...9/IMG_3526.jpg http://i751.photobucket.com/albums/x...9/IMG_3527.jpg http://i751.photobucket.com/albums/x...9/IMG_3535.jpg http://i751.photobucket.com/albums/x...9/IMG_3534.jpg http://i751.photobucket.com/albums/x...9/IMG_3528.jpg |
NEW CARBON SPOILER PURCHASED
Found it difficult to get a carbon spoiler in the standard impreza shape. After a bit of searching this came up on ebay. A well made piece of carbon. http://i751.photobucket.com/albums/x...9/IMG_7831.jpg http://i751.photobucket.com/albums/x...9/IMG_7832.jpg http://i751.photobucket.com/albums/x...9/IMG_7831.jpg http://i751.photobucket.com/albums/x...9/IMG_7834.jpg Fitted http://i751.photobucket.com/albums/x...9/DSC05150.jpg http://i751.photobucket.com/albums/x...9/DSC05217.jpg |
ALLOY REFURB
Before (Alloys needed a good refurb. All four had scuffs and dings. Also the Prodrive cap needed renewed. Couldnt get Prodrive caps in black so purchased carbon OZ caps) http://i751.photobucket.com/albums/x...9/DSC03670.jpg http://i751.photobucket.com/albums/x...9/DSC03673.jpg http://i751.photobucket.com/albums/x...9/DSC03679.jpg After (sent them to TWS in Glasgow. Had a bit of hassle and they had to get back to get repainted but the final finish was awesome. Also purchased new caps and studs http://i751.photobucket.com/albums/x...Picture1-9.png http://i751.photobucket.com/albums/x...L_NUTS_300.jpg http://i751.photobucket.com/albums/x...9/IMG_4338.jpg http://i751.photobucket.com/albums/x...9/IMG_4339.jpg http://i751.photobucket.com/albums/x...9/IMG_4335.jpg http://i751.photobucket.com/albums/x...9/IMG_4337.jpg |
BRAKES
Before (The calipers also needed a good refurb ad paint. I also had to buy discs and pads as the last set were done. So bought new drilled Brembo discs and pads all round. Also purchased new brake lines from Scooby Parts. I had my calipers refurbed at Godspeed brakes. So thanks to Ben for all your help and making an awesome job of my brakes. Cheers http://i751.photobucket.com/albums/x...9/DSC03681.jpg http://i751.photobucket.com/albums/x...9/DSC03682.jpg http://i751.photobucket.com/albums/x...9/DSC03683.jpg http://i751.photobucket.com/albums/x...9/DSC03685.jpg http://i751.photobucket.com/albums/x...9/IMG_2450.jpg New Brake Lines http://i751.photobucket.com/albums/x...9/DSC04031.jpg New Discs and Pads http://i751.photobucket.com/albums/x...9/DSC04029.jpg http://i751.photobucket.com/albums/x...9/IMG_4408.jpg http://i751.photobucket.com/albums/x...9/IMG_4412.jpg |
SUSPENSION
Decided to fit Tein lowering springs and replace the Prodrive springs. As the Prodrive spring lowered the car anyway I only got a drop of about 5-6mm but still a drop. Also decided the struts needed a refurb. Before http://i751.photobucket.com/albums/x...DSC05138-1.jpg http://i751.photobucket.com/albums/x...9/DSC05139.jpg http://i751.photobucket.com/albums/x...9/DSC05138.jpg After. Renewed all the bolts. http://i751.photobucket.com/albums/x...9/DSC05136.jpg http://i751.photobucket.com/albums/x...9/DSC05137.jpg http://i751.photobucket.com/albums/x...9/DSC05140.jpg http://i751.photobucket.com/albums/x...9/DSC05135.jpg http://i751.photobucket.com/albums/x...9/DSC05134.jpg http://i751.photobucket.com/albums/x...9/DSC05131.jpg http://i751.photobucket.com/albums/x...9/DSC05096.jpg |
SERVICE
http://i751.photobucket.com/albums/x...9/DSC04026.jpg http://i751.photobucket.com/albums/x...9/DSC04025.jpg Filter and Walbro fitted to get ready for remap. http://i751.photobucket.com/albums/x...9/DSC04028.jpg http://i751.photobucket.com/albums/x...9/DSC04032.jpg |
CARBON INTERIOR WRAP WITH 3M
Not a fan of Carbon wrapped cars but it looks not bad in the interior. http://i751.photobucket.com/albums/x...9/IMG_2095.jpg http://i751.photobucket.com/albums/x...9/IMG_2099.jpg http://i751.photobucket.com/albums/x...9/IMG_2103.jpg http://i751.photobucket.com/albums/x...9/IMG_2109.jpg WHEEL SPACERS http://i751.photobucket.com/albums/x...9/IMG_7057.jpg http://i751.photobucket.com/albums/x...9/IMG_7060.jpg |
SOME SHOTS OF DIFFERENT STAGES
With some help from Daddys little helpers. http://i751.photobucket.com/albums/x...9/DSC03643.jpg http://i751.photobucket.com/albums/x...9/DSC03668.jpg http://i751.photobucket.com/albums/x...9/DSC05098.jpg http://i751.photobucket.com/albums/x...9/DSC05100.jpg http://i751.photobucket.com/albums/x...9/DSC05123.jpg http://i751.photobucket.com/albums/x...9/DSC05092.jpg http://i751.photobucket.com/albums/x...9/DSC05090.jpg http://i751.photobucket.com/albums/x...9/DSC05088.jpg http://i751.photobucket.com/albums/x...9/photo2-1.jpg |
SOME MORE PICS BEFORE THE CARBON BONNET WAS FITTED TODAY
http://i751.photobucket.com/albums/x...9/DSC06019.jpg http://i751.photobucket.com/albums/x...9/DSC06017.jpg http://i751.photobucket.com/albums/x...9/DSC06014.jpg http://i751.photobucket.com/albums/x...9/DSC06011.jpg http://i751.photobucket.com/albums/x...9/DSC06016.jpg http://i751.photobucket.com/albums/x...9/DSC06010.jpg http://i751.photobucket.com/albums/x...9/DSC06015.jpg http://i751.photobucket.com/albums/x...9/DSC06020.jpg http://i751.photobucket.com/albums/x...9/DSC06018.jpg http://i751.photobucket.com/albums/x...9/DSC06009.jpg http://i751.photobucket.com/albums/x...9/DSC06008.jpg http://i751.photobucket.com/albums/x...9/DSC06012.jpg http://i751.photobucket.com/albums/x...9/DSC06013.jpg |
New Carbon bonnet arrived yesterday, so fitted it today with some help.
Fit is really good just a couple of things that slowed us down. I had to take the bumper off to adjust the bonnet catch. Scoop took a bit of work to get all bolts in but we got there and it fits very well. The only thing I need to do is make a fitment for the intercooler water spray. The finish of the bonnet is also very, very good. I recommend getting one if you are looking at them. John at www.demonmotorsport.co.uk http://i751.photobucket.com/albums/x...9/DSC06642.jpg http://i751.photobucket.com/albums/x...9/DSC06643.jpg http://i751.photobucket.com/albums/x...9/DSC06644.jpg http://i751.photobucket.com/albums/x...9/DSC06646.jpg http://i751.photobucket.com/albums/x...9/DSC06648.jpg http://i751.photobucket.com/albums/x...9/DSC06649.jpg http://i751.photobucket.com/albums/x...9/DSC06650.jpg http://i751.photobucket.com/albums/x...9/DSC06651.jpg http://i751.photobucket.com/albums/x...9/DSC06653.jpg http://i751.photobucket.com/albums/x...9/DSC06655.jpg http://i751.photobucket.com/albums/x...9/DSC06656.jpg http://i751.photobucket.com/albums/x.../DSC066571.jpg http://i751.photobucket.com/albums/x...9/DSC06657.jpg http://i751.photobucket.com/albums/x...9/DSC06658.jpg http://i751.photobucket.com/albums/x...9/DSC06659.jpg http://i751.photobucket.com/albums/x...9/DSC06660.jpg http://i751.photobucket.com/albums/x...9/DSC06661.jpg http://i751.photobucket.com/albums/x...9/DSC06662.jpg http://i751.photobucket.com/albums/x...9/DSC06663.jpg http://i751.photobucket.com/albums/x...9/DSC06666.jpg |
Very nice indded.
|
looks really good, i like the front bumper a lot
wiley |
Cheers :thumb:
Hopefully get her out more next summer. |
I like the original bumper better but apart from that looks great well done brakes are the same as mine only I done mine with gold decals to go with my wheels top car
|
Looks great. Love the lights and black wheels. Glad I spotted this because same wheels as I have and I have been thinking of going black, and now I am, soon as the money side let's me.
|
Very nice mate, looks very stealth.
|
What an awesome looking motor :notworthy
Carbon looks great :D Personally, I'm not a big fan of pinstripes on wheels but each to their own! Welcome to the forum and keep up the good work :thumb: |
looking great is the front wrc bumper from htautos?
|
Cheers for the comments.
Im not so keen on the wheels now. Would rather all black or anthracite. Yeah its an HTAutos bumper. I wasnt sure at first buts its growing on me. It does need a splitter but they dont make one and I aint doing a home made job. I removed the badge centre badge holder on the bumper as it was way too big. |
looks awesome...!
|
What did you use for your engine bay clean please?
|
Very nice.
|
Really like that, top work fella!
|
Love this thread :)
Updates? |
Just sold it to a guy in Guildford.
He said he was going to join the forum so he may post updates. |
All times are GMT +1. The time now is 07:08 AM. |
© 2024 MH Sub I, LLC dba Internet Brands