Plenty of 400hp goodies
I have plenty of parts for sale that helped me make 402/355 on a newage sti. Reason for sale of parts is because i'm greedy and hunting more power ;)
Pics will follow but list is as follows: RCM400 turbo. Has covered about 10k on my car and 8k previously iirc. Was producing 401.8 hp at 1.7 bar falling off to 1.5 - £800 Price drop = £700 ------- SOLD Harvey Smith ported headers. I'm going to re-wrap the centre section in new DEI heat wrap as it unfortunately come off during removal. £150 ------ SOLD Harvey Smith custom up-pipe (2 bolt type) £90 ------- SOLD Lightweight under-driven alluminium crank pulley. No brand but did the job £20 ------ SOLD HKS SSQV in black with purple insert. Few scratches £80 ------- SOLD Dump valve adapter in blue £15 Hayward and Scott open mouth decat downpipe. 3" tapering to a 2.5" £90 ------ SOLD 2nd decat pipe in 2.5" bore £45 or a deal with the above downpipe ------ SOLD Super lightweight Ganador titanium (real titanium) resonated exhaust. Centre section and rear section in one. It's 2.5" bore just before the resonator and 3" backwards. Nice and subtle on idle but really roars when you open up the throttle. The resonator has a small crack in it from speed bumps scrapes £350 3" turbo hard inlet pipe. Perfect for running bigger standard position turbo without fear of a 3" silicone pipe sucking shut £100 Walbro 255 lph fuel pump £40 ------- SOLD EJ207 single AVCS heads, cams and valve train (uk) £450 Price drop = £400 Version 8 sti bottom end £800 Price drop = £750 ------- SOLD Sti six speed flywheel £50 Prodrive sports cat £150 ------- SOLD Another 2.5" bore 2nd decat pipe £45 or deal with sports cat ------- SOLD Subaru turbo up-pipe gasket £12 Subaru downpipe gasket £12 ------- SOLD Subaru intake manifold gaskets (pair) £15 ------- SOLD GT Spec II up-pipe heat wrapped £60 ------ SOLD Sti ignition coils £30 each 2003 UK STI ECU. Mapped by JGM on the RCM400, 650cc injectors, decatted 2.5 bore exhaust £150 Version 8 STI front seats, excellent condition £250 I'll add more should i come across anything else i wish to sell and pics will be added soon :) |
Out of interest, what headers, up-pipe and exhaust are you looking to upgrade to?
|
Already have :)
Got GT spec II headers, H&S rotated up and downpipes, Miltek 3" cat back and a GT35R |
Mighty fine. Going on a 2.0 or 2.5 ?
|
I would like to see a pic of the inlet pipe please Tom, could be interested in this.
Is this a straight forward swap under the inlet manifold? |
Originally Posted by Murrayf99
(Post 10264077)
Mighty fine. Going on a 2.0 or 2.5 ?
Originally Posted by Blue by You
(Post 10264098)
I would like to see a pic of the inlet pipe please Tom, could be interested in this.
Is this a straight forward swap under the inlet manifold? I had to lift the manifold to get it under |
Originally Posted by TH3_5T1G
(Post 10264108)
2.35 :)
Pics will probably be up tomorrow Steve. As for the swap, it's about as straight as any other job on a Subaru. Should be a doddle but turned out to be a PITA :lol1: I had to lift the manifold to get it under Can I let you know for sure after I see a pic? |
Of course mate :thumb:
|
Pics of the exhaust mate
Cheers Steve |
Pic of the crank pulley please.
|
Pic of up pipe and headers pls mate. I'll take both if they're half decent.
|
"Cold air intake kit (minus filter). Runs down behind fog lights/covers £50"
Pics of this kit please mate when you have them :thumb: Thanks |
Originally Posted by stevemoir
(Post 10264221)
Pics of the exhaust mate
Cheers Steve
Originally Posted by martin850
(Post 10264283)
Pic of the crank pulley please.
Originally Posted by Bugeye_Scoob
(Post 10264287)
Pic of up pipe and headers pls mate. I'll take both if they're half decent.
|
Originally Posted by SupraGaz
(Post 10264300)
"Cold air intake kit (minus filter). Runs down behind fog lights/covers £50"
Pics of this kit please mate when you have them :thumb: Thanks |
Thanks mate that would be great.
|
Originally Posted by TH3_5T1G
(Post 10265287)
Sorry to say at this point but i can't seem to remember where i've put it. Once i find it i'll put the pic up :thumb:
|
Some pics added
|
Tom YHPM
|
PM's replied :)
|
Any luck with the pic of the pulley mate? How much would delivery be?
|
No sorry mate, it was another late one at work so didn't have time to travel to the car and check if it's in there. I will definately go tomorrow though mate, sorry again
|
Originally Posted by TH3_5T1G
(Post 10267048)
No sorry mate, it was another late one at work so didn't have time to travel to the car and check if it's in there. I will definately go tomorrow though mate, sorry again
Could I get first refusal please? |
Fuel pump sold
|
Do you still have the Harvey headers?
|
Originally Posted by L&G.scobby
(Post 10267149)
Do you still have the Harvey headers?
|
PM sent
|
PM replied :thumb:
|
How did the RCM spool up, anything similar to a 20g or closer to vf35?
|
Thanks 5T1G.
Let me know you received payment for headers, thanks. |
All times are GMT +1. The time now is 11:37 PM. |
© 2024 MH Sub I, LLC dba Internet Brands