Right,
My brother has been in Japan for 6 weeks and when he comes back this week I hope he's going to get a pleasant surprise. While he's been away, I've been having stuff done/doing stuff myself to his MY97. (He knows all about it, but he's not seen it yet) So far I have: Colour coded his side skirts Replaced his low level spoiler with an STi6 one Decatted it Had EBC brakes and pads and 4 pots fitted Painted his callipers (f+r) red (at his request) Fitted scoops instead of the normal bonnet vents and meshed them Meshed his main scoop and the side vents(next to the fogs), grille and the bit behind his reg plate. Removed the SUBARU logo from his boot Removed his resonator box ready for an induction kit. Washed it, polished it and filled up the tank! :D Do you reckon he'll be chuffed? here are the pics: http://upload.turbosport.co.uk/galle...2332470073.jpg http://upload.turbosport.co.uk/galle...1233213312.jpg http://upload.turbosport.co.uk/galle...2332917683.jpg http://upload.turbosport.co.uk/galle...2332933132.jpg http://upload.turbosport.co.uk/galle...2332809821.jpg Cheers Rich |
do you fancy being my brother for a week
|
Well he certainly won't get into the "Standard Scooby" club now will he :)
|
Well, if he doesn't send him packing again :D
Looks like the dog's dangly bits. Stefan |
Oh yes!
Top job Rich, looks wicked mate.:D:D:D Rob. |
I hope you're going to finish the job and stump up the extra cash for his insurance premium! :rolleyes:
Nice though...Sir, you have taste - Which we already knew ;) |
nice :D
how much to do the meshing on my car ;) mikee |
Cheers Chaps,
LOL @ Kippax. Squizz, cheers for the compliment. On the insurance he's already paying £1600 :eek: (aged 22) so another few quid won't hurt too much I hope !! Mike, bought the mesh from Rob from MRO (see his post above), cost about £25 quid delivered. Did the chopping and fitting myself. Even had enough left over to do Spen555's scoop for him. Cheers Rich |
Rich,
top job! I like the mesh (where did u get it?) you could upgrade his wheels for a nice set of 18" while your at it! |
Hi Markus,
Read my post above yours m8!! Rob at MRO got me the mesh. He's actually awaiting some 17" WRX 01 wheels like yours (and Rob's) but I think it won't be long before 18s make an appearance! Next on his agenda is a HKS Racing Suction kit, FCD and EVC4 boost controller. He wants over 300 brake, just like his big bro! Cheers Rich |
Rich,
soz mate, I should learn to read (shark's don't read that well ;) lol) might get some mesh for the beast. mmmmm MY01's nice! If he has the 01's and then decides to go to 18" let us know as I might be interested in the wheels if the price is right. Bit premature I know, but what the hey. |
Rich,
Did I see your bro's car in an Oldham tuners along with your own beastie a couple of weeks ago. Looks real nice ;) Is yours all done too? All set for Well Lane2? Cube. |
Rich car looks wicked.Do you have contact details for MRO?
Will the mesh over the intercooler scoop not hinder cooling? |
Deep, keep checking to links at the top of the pages. He's one of the good guys and bought a banner....
Dan |
Cheers Danny,long time no hear.
|
Rich
I have an HKS Racing Suction Kit for sale Mail me if interested Thanks ps Nice work, some unusual touches to that car. [Edited by russell hayward - 4/24/2002 11:22:51 PM] |
Cheers for all the compliments chaps.
For anyone else who wants to know about the mesh it's available from www.mroscoobystlying.co.uk Cube, Hi m8, yep all set for Well Lane. My brother's car is on the rollers this time so we'll see if he can keep up with me. Yes, it was his car in a certain Oldham Tuners ;) the other week. he was having his new brakes done. Mine's in there now having an EGT Gauge and braided fuel lines fitted. HKS manifold on order too! Deep, No, the mesh doesn't hinder cooling, it's not that fine. but it does stop leaves and other stuff getting in the scoop that would. It should also stop some of the objects getting in there that seem to bend the fins on everyone's intercoolers. Quite what does that I don't know? :confused: Russell, Damn! Wish I'd known, he's already ordered a brand new one. Due in anytime. I'll bear you in mind though just in case. Cheers Rich |
You shady b4stard!
I doubt your brother will even speak to you when he comes back! ;) |
Looks great! :D :cool:
Can you be my brother ;) :D When's he back? We have to have a reaction... :) Jen |
Cheers Peeps.
He's back tonight. I'm dropping it off for him. I'll let you know what he says. cheers Rich |
He`ll say BLIMMY youve done a good job, when i left that thing was a metro ;)
Looks stunning mate :) |
Ok Rich,
So what did he say? :D Ian |
I actually put a post up but it disappeared :confused:
He's over the moon. Well chuffed. Maybe I should do this for a living or something? LOL :D Cheers Rich |
That looks 'SCHWEEEEEEET'!!!!!
|
Is the mesh in the front Scoop not going to restrict the air flow to the already stupidly placed, undersized and poorly fed intercooler??
I panic about the amount of air getting to mine all the time after reading some of the tech threads on here!! just a thought!! Looks good though... Tim :D |
very very nice mate
When I meshed mine a while back two things I found happened.. First I lost boost... second the damn mesh came off when I was on the motorway... Not all of it came off ie.. the turbo cooler one was fine.. untill I took it out as I was losing boost...but the ones under the indicators kept coming off... twice I drove from London to manchester and when I got there one of the meshes was missing. Replaced it and then another time the other one went....... so I gave up... The only ones that never came off so I have still left them there were the ones right at the bottom ..the brake vent ones. Maybe I just never put them on right :D Mark |
They are cable tied on very well so I think they'll be ok.
Mine runs 1.4 - 1.5bar with the same mesh, so don't think boost restriction is a problem with THIS mesh. Thanks for the compliment anyway. :) Rich |
BTT
In Memory of Nick [Edited by IanW - 8/7/2002 1:28:52 PM] |
BTT, RIP Nick,
Andyp |
RIP
|
All times are GMT +1. The time now is 12:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands