ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   OMP Corsica S/Wheel & Boss Kit (https://www.scoobynet.com/general-technical-10/899571-omp-corsica-s-wheel-and-boss-kit.html)

B16 GAF 02 August 2011 05:52 PM

OMP Corsica S/Wheel & Boss Kit
 
Hi, i have just purchased the above wheel and kit and was wandering if anyone can point me to the right direction in buying a -Airbag Warning Light Bypass Cable so the airbag dash light is eliminated!

Please if you could forward me some links or any traders here that are selling them resistor cable.

I have tried eBay but no luck so far!

To fit onto MY99 Subaru Impreza STi Version 5!

Thanks in advance - Gafar ;)

banny sti 02 August 2011 05:53 PM

Speak to Andy at RH and he will tell you which one you need :)

Maz 02 August 2011 07:37 PM

Banny is referring to Richard Henry Autos the number is in his signature.

joz8968 02 August 2011 08:17 PM

Can't you just remove the bulb? (Like I've done in my STi 5). The reason I say this is that the resistor cable, as well as extinguishing the "AIRBAG" dash light, also disables the other airbags anyway i.e. exactly the same scenario as removing the AB bulb!

Anyway, here's a resistor cabling kit:-

Simoni Racing Airbag Warning Canceller Kit

B16 GAF 03 August 2011 01:37 AM

Cheers guys for the info. i will be using Andy @ RH to fit all my MODS etc etc & thanks joz8968 for the link - i will be placing the order :)

Banny - you selling that white RA Roof Vent that you have at RH's??

Cheers :)

banny sti 03 August 2011 08:18 AM


Originally Posted by B16 GAF (Post 10166642)
Cheers guys for the info. i will be using Andy @ RH to fit all my MODS etc etc & thanks joz8968 for the link - i will be placing the order :)

Banny - you selling that white RA Roof Vent that you have at RH's??

Cheers :)

Nope, It is going on my Type R when its finished :thumb:

B16 GAF 03 August 2011 08:14 PM

Ok Cool Banny - Do you know anyone that would want to do a swap with the OMP Boss Kit??

The one that i have been supplied with my s/wheel is for a non-airbag model, and im requiring a OMP Boss Kit with an airbag model kit.

Ive had a word with Andy @ RH today and he also said that ill have to make another switch for a Horn as the horn will not work either?

Cheers :)


All times are GMT +1. The time now is 09:39 PM.


© 2024 MH Sub I, LLC dba Internet Brands