SECS Psi3 Data monitor complete with pod £180
As above in very good condition with manuals. Very rare nowadays especially pod mounted! Genuine subaru pod. Replaces mini glovebox(as shown below)
Only selling as decided to sell car. Will not split! Below is some info and pics........ SECS PSI3 Data Monitor for all Subaru's which communicate's with the ECU via the OBD2 port to show you the below info in real time: BP Boost pressure BAR IN Intake air temperature DEGREES C (this is not charge temperature) CT Coolant temperature DEGREES C ES Engine speed RPM BV Battery VOLTS TH Throttle position % (some cars have limited range E.G 5 to 85 %) RS Road speed MPH or KMH (user selectable) IA Ignition advance DEGREES BTDC AF Air flow meter GRAMMES PER SECOND LA Lambda sensor 1 LAMBDA RATIO KC or KN Knock correction DEGREES (ignition offset) ID Injector duration MILLISECONDS EG Exhaust gas temperature DEGREES C TC Time of day clock EX Exhaust gas temperature OT Oil temperature (Requires external sensor to be fitted) OP Oil pressure(Requires external sensor to be fitted) It is also used to read Subaru specific and generic fault codes, as well as being able to clear the codes and reset the ECU. It has an LCD screen with 4 buttons to allow you to personalise the display data, over 4 pages. It can also record the peak data of: BP Boost pressure BAR CT Coolant temperature DEGREES C ES Engine speed RPM RS Road speed MPH or KMH (user selectable) The display also allows you to enter a personal message, to be shown on the start up screen. Selling for £180 plus delivery. If interested PM me. Also my car is for sale here is the advert price is £2995ono https://www.scoobynet.com/subaru-444...p-3495ono.html http://i52.photobucket.com/albums/g1...s/DSC_0006.jpg http://i52.photobucket.com/albums/g1...s/DSC_0005.jpg http://i52.photobucket.com/albums/g10/greegs/psi3.jpg http://i52.photobucket.com/albums/g10/greegs/psi32.jpg |
Forgot to add my data monitor was sent to Simon at Auwell electronics ltd(founded psi3 company)to have a new microprocessor fitted and upgraded to the latest software. This was done in March 2011 at a cost of £75!!
Gregor |
do you have simons email details as my psi3 monitor is freezing
|
Yep sent you a PM mate
Greegs |
Will this not fit a newage dash?
|
Afraid not only fit's classics
|
Back up still for sale
|
Still available:cool:
|
is there any chance i could have simons details as mine is freezing as well :thumb:
|
Does this only fit a facelift scooby?
|
is there any chance i could have simons details as mine is freezing as well
|
Parmin and daz r wrx sent you both a PM
Greegs |
Originally Posted by scoobynelly
(Post 10113168)
Does this only fit a facelift scooby?
Greegs |
Bump for a top bit of kit.
All scoobies should have one. You can take this out of the top mount, and mount it in a DIN slot, so the actual unit will work with all years with an OBD port. |
Cheers joeyturbo!
Still for sale! |
PM sent regarding this ;-)
|
SOLD!
|
All times are GMT +1. The time now is 02:36 AM. |
© 2024 MH Sub I, LLC dba Internet Brands