Whats the standard TD04 actuator boost pressure set to
 

Hi

Could somone let me know what the standard boost pressure is set to on the actuator which is fitted to the TD04 systems.

I think when i had a standard td04 it boosted to 13/14 psi dont know if that helps.

If you connect the actuator directly to turbo outlet, about 0.5 -0.6 bar, probably depending a little on how much pre load you apply. Standard boost however when ECU controlled is in the region of 0.9 bar.

as above with my 99 turbo was running 0.5 on the actuator when I brought it because it had no restrictor pill, and 0.9bar after I refitted one.