How to remove my stereo?
 

Its an Alpine fixed into centre console,do i have to take the console out,as there are no sign of any clips :wonder:

http://i171.photobucket.com/albums/u...5-30183545.jpg
http://i171.photobucket.com/albums/u...5-30183557.jpg

just remove the trim around the radio,the bit with the heater controls in!its just cliped in but be carefull the dash marks very easy.

cheers pal.

1-pull up the gear stick surround,(from the handbrake point)
2-once pulled out the way,theres 2 screws either side holding the stereo surround in place
3-once the screws are out pull the surround outwards working upwardsd till u get to the top and it feels as if its going to break but keep pulling,plastic clips holding it in place,
4- next there will be 3/4 screws either side of the stereo holding the stereo and storage box in place,
5- regardless of single or double din u will need the stereo bracket and screws for the next on to hold it in place,

i have pics somewhere and will pop them up later

Thanks for that guys:thumb:

http://i193.photobucket.com/albums/z...0112009212.jpg
http://i193.photobucket.com/albums/z...0112009213.jpg

I've deleted my version of the stereo removal as it was total nonsense and related to my experience of removing the stereo from my bugeye.

I can't believe Subaru have changed the way the interior is put together so dramatically, it's completely different

The explanation above is all you need.

No bother TF.

Thats great Tom:thumb: