|
Throwing in the towel,sti8 huge spec.
Really hard decission to make but i cant justify spending another 6k+ on the car to get it on the road again :cry:,see my garage for spec,i will get a full detailed list up later tonight.
Some pics and contact number 07899025855 http://i171.photobucket.com/albums/u...P1010091-1.jpg http://i171.photobucket.com/albums/u...P1010090-1.jpg http://i171.photobucket.com/albums/u...P1010082-4.jpg http://i171.photobucket.com/albums/u...P1010093-2.jpg http://i171.photobucket.com/albums/u...P1010015-6.jpg Please ask if there are any bits you see in the pics or in my garage full spec,as the full car is going. |
is your fmic black or silver? Very interested if black, also 3 port boost solenoid
|
how much for the inlet manifold with the tumble valves
|
how much for just heads? and how much for complete long engine?
price on battery relocation kit to boot.. price on debadged grill |
PM me a price on the brakes and billet pitch mount mate,thanks:thumb:
|
Interested in Manifold
Jura |
Second dibs on the intercooler
Also ARB`s PM sent |
Oil cooler and K&N cone here please
|
Headers please. Money waiting. Drop me a pm with delivered priced please ;)
|
PM me a price for the complete rotated setup , headers , up pipe ,downpipe , gt35 and external wastegate
regards dean |
Can I hve a price for the 6 speed too please.
|
Rear wing, rear lights, location please fella :)
|
Price on fuelab fpr, all dash6 fittings, billet fuel filter and braided hose for parallel fuel rails ;-) already got some rails (for a classic) so just need the above.
Cheers |
price for the wheels if they will fit my classic
|
44mm Tial please,
Why 6k+ to get it back on the road? :( |
also interested in engine, how many miles, what power were you running? price with and without heads please thanks Iain
|
Ok some details,
The engine melted a piston last week,so hence the descission to break,the 2.3 will just need at worse case 1 new liner other 3 are ok as are the pistons,this has the 14mm head stud conversion and a billet 78mm crank,i will know more details on the condition of the engine soon as i get it home. List Front 330mm AP cp5555 calipers with pagid rs 29 pads little use on pads,complete with like new performance friction disks and braided lines,this kit would cost 3k ish new £995 delivered Rear brembo brakes 1 caliper has been drilled and tapped to next metric size due to snapped bolt,still perfectly useable,the calipers have just had a full re-furb in black with yellow brembo decals to match front AP's,these will come complete with pagid rs42 pads and genuine brembo disks £200 AST fully adj suspension,this is the remote canister kit which is over 3k new,in perfect working order,springs have the usual paint flaking on them but the kit is awesome,no knocks or bangs,complete with top mounts £995 delivered. Wheels are rota gra's 7.5 x 18" ,5x100 ,in white,these are in as new condition,they have a used set of toyo r888 tyres on 225x50x18",all legal,£650 collected,can send on pallet at extra cost. Oil cooler is a setrab one with pipes/fittings and sandwich plate £140 (dibs to banny) ? Turbo is a garrett b/b GT35R 0.63 only done 300 running in miles £675 delivered. Tial v-band 44mm wastegate,new diahpram and has 1 bar spring,also have a .7 bar spring £220 delivered Prosport gauges x 2 oil pressure and oil temp these are new,complete with newage drivers side pillar pod all sensors etc £90 delivered. Rear lights 125 delivered Carbon S202 style wing £250 collection only this is an adj one. Will keep adding to the list all night. |
I will accept paypal but only as a gift,other wise cash on collecton from sheffield S2
contact number 0789902585 |
Rotated kit sold,
headers sold, ecu sold. |
Originally Posted by H4RDY-P1
(Post 10063901)
I will accept paypal but only as a gift,other wise cash on collecton from sheffield S2
contact number 0789902585 Is TGV free? Jura |
Originally Posted by sp00ks
(Post 10063791)
Price on fuelab fpr, all dash6 fittings, billet fuel filter and braided hose for parallel fuel rails ;-) already got some rails (for a classic) so just need the above.
Cheers Fuellab reg £140 delivered. |
Originally Posted by jura11
(Post 10063906)
Manifold matey available?
Is TGV free? Jura |
Pic of engine bay
http://i171.photobucket.com/albums/u...P1010082-4.jpg |
Fuel set-up,walbro lift pump with braided -6 fittings on sender unit,swirl pot,bosch 044 all lines/fittings and covers/brackets as in pic,lines go to the metal pipes under the back seats £400 complete set up
http://i171.photobucket.com/albums/u...P1010014-5.jpg http://i171.photobucket.com/albums/u...P1010008-2.jpg http://i171.photobucket.com/albums/u...P1010009-3.jpg |
Originally Posted by H4RDY-P1
(Post 10063911)
Inlet mani is a one off,its a 1 piece spec-c mani with a wedge welded on the front,ill dig some pics out.
Jura |
Battery relocation kit,comes with chunky cable to bay,propper alloy battery box,earth lead,gold terminals and a fuse/trip switch (works fine but plastic is cracked) £75 delivered.
|
Originally Posted by jura11
(Post 10063924)
How much?
Jura Its had a bracket welded on for fpr,could be removed. http://i171.photobucket.com/albums/u...P1010161-4.jpg http://i171.photobucket.com/albums/u...P1010162-4.jpg |
And bracket for water header tank
|
|
Ported and polished throttle body with water pipes removed/blanked off and has a plate over map sendor,this can be removed and re-use map sensor £75 delivered
|
| All times are GMT +1. The time now is 11:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands