HRC Performance FUEL PUMP GROUP BUY
HRC Performance FUEL PUMP GROUP BUY
These are direct fit and i can email a pdf of fitting instructions to all buyers if needed.All pumps come with 2 years warranty HRC 255LPH £50 HRC 290LPH £56 HRC 340LPH £79 (wiring upgrade advised although as long as wiring is in good condition standard will surfice) This price includes delivery. Any mix of pumps can go on the list, payment will be through paypal as GIFT. Add £2 per pump if you dont want to send as gift. You can pay now of you can pay just before i place the order i dont mind.I have some in stock anyway already. This is on other forums also so dont worry if the list looks empty no minimum amounts as i have other orders from other forums also 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. The 340lph pump is the same as what puma speed sell for £200 |
been using one for over a year @340,very quite compared to walbro pumps.
apparently the casing dont corrode unlike the walbro do too. |
Does this come as a kit with all stuff needed for installation or just the pump?
|
I wouldnt have thought there is much in the way of a kit to fit one of these. Also even for a novice they are very easy to fit, basic tools like a screw driver, sockets or spanners. Usually a case of unbolt the rear seats, remove the boot cover plate, unbolt the fuel assembly and electrical connector, twist and remove the carriage that holds the pump, unclip the pump, unlip the filter, reverse all the above ;)
Free Bump Jay Rob |
Yes rob very easy fit and all buyers will recieve an email pdf fitting instructions anyway.
And yes these are quieter than walbro ones as these have a better bearing in them |
Originally Posted by Imprez'd
(Post 10013155)
Does this come as a kit with all stuff needed for installation or just the pump?
Yes they come with fitting kit but not much needed as its just a case of the original plug plugs straight onto the top of the HRC pump |
which size pump would you say would suit me running 400bhp
|
Originally Posted by phil739
(Post 10014781)
which size pump would you say would suit me running 400bhp
|
Hey Jay,
YHPM Free bump ;) |
Would the 340lph suffice for 700bhp?
|
Originally Posted by banny sti
(Post 10016406)
Would the 340lph suffice for 700bhp?
|
whats the difference between 01/07 wrx and 01/07 sti 290-pump??
|
I presume these are all the same size as the walbro 255?
Are these proven for reliability at say 500bhp for a fair few thousand miles? Genuine questions as ill be wanting one if they are. Cheers |
Originally Posted by banny sti
(Post 10016406)
Would the 340lph suffice for 700bhp?
255lph rated to 585bhp 290lph rated to 650bhp 340lph rated to 725bhp |
Originally Posted by scoobsy
(Post 10017159)
whats the difference between 01/07 wrx and 01/07 sti 290-pump??
|
Originally Posted by si2000
(Post 10017344)
I presume these are all the same size as the walbro 255?
Are these proven for reliability at say 500bhp for a fair few thousand miles? Genuine questions as ill be wanting one if they are. Cheers The 255 are rated to 585bhp so yes, although i would fit the 290 which is rated upto 650bhp so its not ruuning close the the maximun rated duty cycle but thats personal choice. As for reliability they are backed by a 2 year warranty which is double the walbro warranty. Oh and these are made by NipponDenso so manufactured by a top company as well. HRC's own scooby has been running one of the 255's for 6 years and i believe its just a tad over 500bhp. |
Originally Posted by JAutos
(Post 10017430)
No difference. just listing models so people can select what they have. otherwise you get a lot of questions asking "does it fit "
|
Originally Posted by JAutos
(Post 10017442)
Never measured a walbro myself but i would assume yes. These are a few mm longer than the oem pump. You need to trim a slight amount off the bottom of the hose you connect the pump to so it fits in its holder
The 255 are rated to 585bhp so yes, although i would fit the 290 which is rated upto 650bhp so its not ruuning close the the maximun rated duty cycle but thats personal choice. As for reliability they are backed by a 2 year warranty which is double the walbro warranty. Oh and these are made by NipponDenso so manufactured by a top company as well. HRC's own scooby has been running one of the 255's for 6 years and i believe its just a tad over 500bhp. It's a 99/00 classic. Si |
HRC Performance FUEL PUMP GROUP BUY
These are direct fit and i can email a pdf of fitting instructions to all buyers if needed.All pumps come with 2 years warranty HRC 255LPH £50 HRC 290LPH £56 HRC 340LPH £79 (wiring upgrade advised although as long as wiring is in good condition standard will surfice) This price includes delivery. Any mix of pumps can go on the list, payment will be through our website. You can pay now of you can pay just before i place the order i dont mind.I have some in stock anyway already. This is on other forums also so dont worry if the list looks empty no minimum amounts as i have other orders from other forums also 1.si2000 290lph 2. 3. 4. 5. 6. 7. 8. 9. 10. The 340lph pump is the same as what puma speed sell for £200 |
GBHRC290 Use this discount code @ checkout
http://www.scoobyworx.com/hrc-290lph-fuel-pump-27-p.asp (is the link to the pumps) Im placing an order in the next few days as i have a number order on group buys on other forums. Anybody wanting them ordered on this batch needs to make payments asap. |
are the 255 ones ok to run on a standard uk turbo without remapping? As i wont be geting my remap until later this year now
|
will take a 290lph pump, all done and ordered on website :)
|
Originally Posted by topshot
(Post 10018693)
are the 255 ones ok to run on a standard uk turbo without remapping? As i wont be geting my remap until later this year now
|
Originally Posted by banny sti
(Post 10016406)
Would the 340lph suffice for 700bhp?
TX. |
Originally Posted by Terminator X
(Post 10019447)
Interesting post Banny! I'm keeping an eye on this as I do need to upgrade my 255 pump.
TX. |
Originally Posted by JAutos
(Post 10019839)
One thing to point out though a twin pump setup may be a better choice, either in tank or external. HRC can supply both. They Recommend twin pump setup when your going upwards of 600BHP
|
hi tried the code for a 255lph kit but wont allow discount/postage etc to be added? what am i doing wrong!
|
Are right sorry mate upto now there was only 290's ordered il add a code tonight for the 255 that will work.
|
Perfect. Thanks
|
GBHRC255 Use this discount code @ checkout
http://www.scoobyworx.com/hrc-255lph-fuel-pump-26-p.asp and the link |
All times are GMT +1. The time now is 04:37 AM. |
© 2024 MH Sub I, LLC dba Internet Brands