Audiobhan 10" Subs x 2 & High Current Amp 1200w
 

I have for sale:

Items location Accrington, Lancashire.

Audiobhan AW1051T 10" Subs x 2 £30 each

http://i823.photobucket.com/albums/z...51tSubBack.jpg

10" Dual 4 ohm Natural Sound Subwoofer
Power Handling:
Peak: 600 watts
RMS: 300 watts
Impedance: Dual 4 ohm
Non-Pressed, non-transfer paper cone
1-1/2" Treated foam surround for enhanced excursion
Extended pole piece provides a more linear magnetic field
Vented oversized back plate allows more excursion without bottoming out
Black anodized aluminum voice coil former for highly efficient thermal transfer
Flat spider design provides symmetrical control of the voice coil through its cone excursion
Convex dust cap increases the cone rigidity and improves power handling
Chrome finish for attractive appearance
4-Layer edge wound voice coil
Frequency Response: 28-1000 Hz
Efficiency: 91 dB
Mounting Depth: 4-5/8"
Cutout Hole: 9"
Cutout Diameter: 10-1/4"

Audiobhan A275HCT Amp 1200w £130.00

http://i823.photobucket.com/albums/z...a275hctAmp.jpg

1200W Max, High-Current 2-Channel Car Amplifier
RMS Power Rating:
75 watts x 2 chan. @ 4 ohms
150 watts x 2 chan. @ 2 ohms
300 watts x 2 chan. @ 1 ohm
Bridged:
150 watts x 1 chan. @ 4 ohms
300 watts x 1 chan. @ 2 ohms
600 watts x 1 chan. @ 1 ohm
Max Power Output: 1200 watts @ 1 ohm
Wired Remote Bass Level Control Included with Blue Illuminated Knobs
Also illuminates red to indicate when amplifier is clipping
High-Current, Non-Regulated Power Supply
Preamp Outputs
Cobalt Blue LED Illuminated Heat Sink Design (on/off switch for your preference)
Thermal Regulated, Air Induction Dual Cooling Fans
Double Sided PCB (Circuit Board)
High Gloss Chrome Plated Finish
Unique, Clean Chrome Fire/Flame Design
Blue Illuminated VU Meters Indicating Output Response
Clear Power and Speaker Connectors
Variable Bass Boost: 0-18dB @ 40-100Hz
Variable Low-Pass Crossover: 40-120Hz
Variable High-Pass Crossover: 50-750Hz
Variable Subsonic Filter: 20-50Hz
Signal-to-Noise Ratio: 100dB
Frequency Response: 10Hz-40kHz
THD: 0.05%
Channel Separation: 50dB
Input Sensitivity: 200mV - 8V
4-gauge power and ground leads recommended. Contact us for information regarding a discount on a select amplifier kit when purchased together.
Dimensions: 14" L x 11-15/16" W x 2-1/2" H
Note: Flames add an additional 1-3/16" to the height

http://i823.photobucket.com/albums/z...SubsandAmp.jpg