SECS Psi3 data monitor £130 free P+P
 

http://i52.photobucket.com/albums/g1...ictures010.jpg
http://i52.photobucket.com/albums/g1...ictures008.jpg


For sale is a SECS PSI3 Data Monitor for all Subaru's which communicate's with the ECU via the OBD2 port to show you the below info in real time:


BP Boost pressure BAR
IN Intake air temperature DEGREES C (this is not charge temperature)
CT Coolant temperature DEGREES C
ES Engine speed RPM
BV Battery VOLTS
TH Throttle position % (some cars have limited range E.G 5 to 85 %)
RS Road speed MPH or KMH (user selectable)
IA Ignition advance DEGREES BTDC
AF Air flow meter GRAMMES PER SECOND
LA Lambda sensor 1 LAMBDA RATIO
KC or KN Knock correction DEGREES (ignition offset)
ID Injector duration MILLISECONDS
EG Exhaust gas temperature DEGREES C
TC Time of day clock
EX Exhaust gas temperature
OT Oil temperature (Requires external sensor to be fitted)
OP Oil pressure(Requires external sensor to be fitted)


It is also used to read Subaru specific and generic fault codes, as well as being able to clear the codes and reset the ECU.

This is a DIN mounted unit but can be fitted into the top mount cubby hole on MY98> Impreza's ( although requires additional mount, mount not included) .

It has an LCD screen with 4 buttons to allow you to personalise the display data, over 4 pages. It can also record the peak data of:

BP Boost pressure BAR
CT Coolant temperature DEGREES C
ES Engine speed RPM
RS Road speed MPH or KMH (user selectable)

The display also allows you to enter a personal message, to be shown on the start up screen.

I also have all the manuals to go with the data monitor.

Greegs

Damnit, I wish these would would on a V4 :(

Free bump for a good piece of kit.

Pm on its way

NOW SOLD thanks for all interest.